Range of wall and ceiling mounted overhead shower outlets, (plastic bodies – various finishes). Both models incorporate a built-in pressure regulator. Maximum operating temperature 85°C. Open outlet use only

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250402055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP M.

Marking:

GROHE logo on showerhead.

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

22121xxx - Grohe Rainshower Mono 310. Head shower set 422 mm, 1 spray. 22122xxx - Grohe Rainshower Mono 310. Head shower set ceiling 142 mm, 1 spray. Where xxx denotes finish, and can be replaced by the following: 000 – Chrome KF0 – phantom black

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of deck mounted pull out kits (various finishes) comprising of a shower handset, shower hose and a stainless steel braided silicone lined connecting hose. The shower handsets incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate backflow protection. Maximum operating temperature: 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250404021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (F) Captive nut flexi hose S/S

Marking:

Gessi on mounting plate.

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

47227 EXTRACTABLE SHOWER AND BATH EDGE 47127 EXTRACTABLE SHOWER AND BATH EDGE

Approval Holder:

Gessi S.p.A.

Company Name

Gessi S.p.A.

Address

Parco Gessi Hamlet Vintebbio Serravalle Sesia

Postcode

13037

Country

Italy

Phone

+39 0163 454111

General Email

pfornara@gessi.it

View All Listings by this Company

Range of wall mounted brass shower outlets in various finishes. Open outlet use only. Maximum operating temperature: 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

251002001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP (M).

Marking:

Vola on base plate

Installation Requirements:

R001 R040

Expiry date:

31/10/2030

Model:

VOLA 080ST-XX, VOLA 080ST+100-XX, VOLA 080ST+200-XX, VOLA 080ST-100-XX. Model VOLA 080ST-XX, VOLA 080ST-100-XX, VOLA 080ST+100-XX and VOLA 080ST+200-XX made in Brass or stainless steel material are available with the different surface finish. Suffix “XX” indicate the number of surface finish and denotes For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Silver, B61=Brushed Black, B64=Brushed copper, B69=Brushed Silver, B70=Brushed Gold. For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper.

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

View All Listings by this Company

Range of Y patterned strainers with a brass body. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” to 2” BSP/BSPT (F) x (F)

Marking:

Conex, size, PN rating and flow arrow on body. Conex Universal Ltd and size on data label.

Installation Requirements:

R001 R120

Expiry date:

30/04/2030

Model:

IDC 180210 series comprising of model codes: 180210RR0160404 180210RR0160606 180210RR0160808 180210RR0161010 180210RR0161212 180210RR0161616 180210FF0160404 180210FF0160606 180210FF0160808 180210FF0161010 180210FF0161212 180210FF0161616

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Zheijang IDC Fluid Control.

Company Name

Zheijang IDC Fluid Control.

General Email

View All Listings by this Company

Range of `Y`-patterned strainers with either brass or DZR brass bodies, incorporating a stainless-steel mesh strainer. Maximum working pressure: 25.0 Bar (1SYA Models) or 16.0 Bar (1SYC & 1SYD models) Maximum operating temperature 95°C. Strainers with compression connections are to be used with copper pipe manufacture to BS EN 1057. Strainers with M profile press-fit connections are to be used with copper pipe manufactured to BS EN 1057 & SS304 Stainless steel pipe manufactured to EN 10312.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

IDC, DN, PN, flow arrow & CR on body CR mark is only present on the DZR models

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Brass Thread Y Strainer 1SYA004 ½” BSP (F) inlet x outlet 1SYA006 ¾” BSP (F) inlet x outlet 1SYA008 1” BSP (F) inlet x outlet 1SYA010 1¼” BSP (F) inlet x outlet 1SYA012 1½” BSP (F) inlet x outlet 1SYA014 2” BSP (F) inlet x outlet DZR Brass Thread Y strainer 1SYA104 ½” BSP (F) inlet x outlet 1SYA106 ¾” BSP (F) inlet x outlet 1SYA108 1” BSP (F) inlet x outlet 1SYA110 1¼” BSP (F) inlet x outlet 1SYA112 1½” BSP (F) inlet x outlet 1SYA114 2” BSP (F) inlet x outlet Brass Compression Y strainer 1SYC004 15mm compression inlet x outlet 1SYC006 22mm compression inlet x outlet DZR Brass Compression Y Strainer 1SYC104 15mm compression inlet x outlet 1SYC106 22mm compression inlet x outlet Brass Press-fit Y Strainer 1SYD004 15mm press-fit inlet x outlet 1SYD006 22mm press-fit inlet x outlet 1SYD010 28mm press fit inlet x outlet DZR Brass Press-fit Y Strainer 1SYD104 15mm press-fit inlet x outlet 1SYD106 22mm press-fit inlet x outlet 1SYD110 28mm press fit inlet x outlet

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co., Ltd.

Company Name

IDC Fluid Control Co., Ltd.

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Zhejiang, Taizhou City, Zhejiang Province, P. R.China

Country

China

General Email

View All Listings by this Company