Range of stainless steel press-fit fittings (316L or 304) and pipes (SUS316L or SUS304 - EN 10312), the fitttings incorporate EPDM O-rings. Crimp joint is achieved by a M profile crimp jaws. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312317

Size:

see models

Marking:

Fittings - PIPRESS, size and stainless steel grade (SUS316L or SUS304). Pipe - PIPRESS, size and stainless steel grade (SUS316L or SUS304).

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Stainless Steel Press Connector: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Adjustable Connector: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Reducing connector: 18x15mm, 22x15mm, 22x18mm, 28x15mm, 28x18mm, 28x22mm, 35x15mm, 35x18mm, 35x22mm, 35x28mm, 42x15mm, 42x18mm, 42x22mm, 42x28mm, 42x35mm, 54x15mm, 54x18mm, 54x22mm, 54x28mm, 54x35mm, 54x42mm, 76.1x54mm, 88.9x54mm, 88.9x76.1mm, 108x54mm, 108x76.1mm, 108x88.9mm. Stainless Steel Press B-type reducing connector: 18x15mm, 22x15mm, 22x18mm, 28x15mm, 28x18mm, 28x22mm, 35x15mm, 35x18mm, 35x22mm, 35x28mm, 42x15mm, 42x18mm, 42x22mm, 42x28mm, 42x35mm, 54x15mm, 54x18mm, 54x22mm, 54x28mm, 54x35mm, 54x42mm, 76.1x54mm, 88.9x54mm, 88.9x76.1mm, 108x54mm, 108x76.1mm, 108x88.9mm. Stainless Steel Press A-type 90°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press B-type 90°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press A-type 45°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press B-type 45°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press End cap: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Equal tee: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Reducing Tee: 18×15mm, 22×15mm, 22×18mm, 28×15mm, 28×18mm, 28×22mm, 35×15mm, 35×18mm, 35×22mm, 35×28mm, 42×15mm, 42×18mm, 42×22mm, 42×28mm, 42×35mm, 54×15mm, 54×18mm, 54×22mm, 54×28mm, 54×35mm, 54×42mm, 76.1×22mm, 76.1×28mm, 76.1×35mm, 76.1×42mm, 76.1×54mm, 88.9×22mm, 88.9×28mm, 88.9×35mm, 88.9×42mm, 88.9×54mm, 88.9×76.1mm, 108×22mm, 108×28mm, 108×35mm, 108×42mm, 108×54mm, 108×76.1mm, 108×88.9mm. Stainless Steel Pipe Bridge: 15mm, 18mm, 22mm, 28mm. Stainless Steel Press Female adapter: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×3/4'', 28mm×1'', 35mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/4'', 42mm×1-1/2'', 54mm×1-1/2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Female Swivel adapter: 15mm×1/2'', 15mm×3/4'', 18mm×1/2'', 18mm×3/4'', 22mm×3/4'', 22mm×1‘’, 28mm×1'', 28mm×1-1/4'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/2'', 42mm×2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Male threaded adapter: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×3/4'', 28mm×1'', 35mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/4'', 42mm×1-1/2'', 54mm×1-1/2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Female threaded 90°elbow: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4'', 42mm×1-1/2'', 54mm×2''. Stainless Steel Press Female threaded 90°elbow with bracket: 15mm×1/2'', 18mm×1/2'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4''. Stainless Steel Press Female Short 90°elbow: 15mm×1/2'', 18mm×1/2'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4''. Stainless Steel Press Male threaded 90°elbow: 15mm× 1/2'', 18mm× 1/2'', 22mm× 1/2'', 22mm× 3/4'', 28mm× 1'', 35mm× 1-1/4'', 42mm× 1-1/2'', 54mm× 1-1/2'', 54mm× 2''. Stainless Steel Press Female Threaded Tee: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1/2'', 28mm×3/4'', 28mm×1'', 35mm×1/2'', 35mm×3/4'', 35mm×1'', 35mm×1-1/4'', 42mm×1/2'', 42mm×3/4'', 42mm×1-1/2'', 54mm×1/2'', 54mm×3/4'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. Stainless Steel Press Male Threaded Tee: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1/2'', 28mm×3/4'', 28mm×1'', 35mm×3/4'', 35mm×1-1/4'', 42mm×3/4'', 42mm×1-1/2'', 54mm×3/4'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. Stainless Steel Press Flange: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press 3Pcs Union Male swivel adapter: 15mm×1/2'', 15mm×3/4'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 22mm×1'', 28mm×3/4'', 28mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/2'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. PIPRESS-Stainless Steel Pipe: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm.

Approval Holder:

ZHEJIANG QILU TECHNOLOGY CO., LTD.

Company Name

ZHEJIANG QILU TECHNOLOGY CO., LTD.

Address

BUILDING24, No.1399 LIANGMU ROAD, HANGZHOU

Country

China

View All Listings by this Company

Range of press fit fittings with PPSU bodies incorporating stainless steel crimp sleeves and EPDM O-Rings for use with Multitubo multi-layer pipes. Maximum working pressure is 10.0 bar. Maximum operating temperature is 70°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

2309926

Size:

16mm, 20mm,25mm, 32mm

Marking:

Multitubo & size on the fittings, Multitubo, material type & size on the pipe.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

Range of press fittings, dim 16 to 32 mm Press-elbow 90° 53010 16mm 53030 20mm 53040 25mm 53050 32mm Press-Tee 55010 55011 55030 55031 55032 55033 55040 55041 55042 55043 55050 55051 55052 55053 Press-coupling 57010 57030 57031 57040 57041 57042 57050 57052 Pipes 10011, 10010 & 10015 MULTITUBO 16x2- coil, box 10030 MULTITUBO 20x2,25 - coil, box 10040 MULTITUBO 25x2,5- coil, box 10051 MULTITUBO 32x3- coil, box 15012 & 15013 MULTITUBO 16x2 -bar 15030 & 15031 MULTITUBO 20x2,25-bar 15040 & 15041 MULTITUBO 25x2,5-bar 15050 & 15051 MULTITUBO 32x3-bar

Approval Holder:

DW Verbundrohr GmbH

Company Name

DW Verbundrohr GmbH

Address

Langer Rain 38, D-97437 Hassfurt

Country

Germany

Phone

+49 (0) 9521 95356-0

View All Listings by this Company

‘Tweetop system’ consisting of brass bodied nickel plated, compression or press fit (‘U’ crimping profile) fittings for use with ‘Tweetop multilayer pipe’ PERT/AL/PERT. Maximum working pressure 10.0 Bar. Maximum working temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

2311912

Size:

Compression: 16mm, 20mm. Press Fittings: 16mm, 20mm, 25mm, 32mm, 40mm, 63mm. Pipe: 16 - 63mm.

Marking:

Compression fittings: Tweetop ‘T’ logo, size, EN1254-3, production date and manufacturing source on compression nut. Press fittings: Tweetop ‘T’ logo, letter for Type (L for elbow; T for Tee) and size on Body. Tweetop name and ‘T’ logo, size, U (press profile), ISO standard, production date and manufacturing source on sleeve. Key to production date/manufacturing source = aAY, with a (month), A (Year), Y (production facility). Where: a = Month, starting with a = January, b= February etc. A = Year, starting with G = 2018, H = 2019, I = 2020, J = 2021, K = 2022, L = 2023. Y = Manufacturing facility denoted by the letter L, S or A. e.g. bGA = manufactured February 2018 by facility A Pipe: Tweetop PERT, size, pressure ratings and date of manufacture (YYYY/MM/DD).

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

PRESS COUPLING: 06011003 - 16x16, 06011005 - 18x18, 06011007 - 20x20, 06011009 - 25x25, 06011011 - 32x32, 06011013 - 40x40, 06011015 - 50x50, 06011017 - 63x63. PRESS COUPLING-REDUCER: 06011103 - 18x16, 06011105 - 20x16, 06011107 - 25x16, 06011109 - 32x16, 06011111 - 20x18, 06011113 - 25x18, 06011115 - 32x18, 06011117 - 25x20, 06011119 - 32x20, 06011121 - 32x25, 06011122 - 40x20, 06011123 - 40x25, 06011124 - 50x25, 06011125 - 40x32, 06011126 - 50x32, 06011127 - 50x40, 06011120 - 63x25, 06011128 - 63x32, 06011129 - 63x40, 06011131 - 63x50. MALE PRESS CONNECTION: 06011205 - 16x½", 06011207 - 16x¾", 06011209 - 16x1", 06011211 - 18x½”, 06011213 - 18x¾”, 06011215 - 20x½", 06011217 - 20x¾", 06011219 - 20x1", 06011221 - 25x½", 06011223 - 25x¾", 06011225 - 25x1", 06011227 - 32x¾", 06011229 - 32x1", 06011231 - 32x1½", 06011233 - 32x1¼", 06011235 - 40x1¼", 06011237 - 50x1½", 06011239 - 50x2", 06011241 - 63x2". FEMALE PRESS CONNECTION: 06011305 - 16x½", 06011307 - 16x¾", 06011309 - 16x1", 06011311 - 18x½”, 06011313 - 18x¾”, 06011315 - 20x½", 06011317 - 20x¾", 06011319 - 20x1", 06011321 - 25x½", 06011323 - 25x¾", 06011325 - 25x1", 06011327 - 32x¾", 06011329 - 32x1", 06011331 - 40x1¼", 06011333 - 50x1½". PRESS SCREW CONNECTION WITH FEMALE THREAD: 06011403 - 16x½", 06011405 - 20x¾", 06011407 - 20x1", 06011409 - 25x¾", 06011411 - 25x1", 06011413 - 32x1". PRESS ELBOW 90: 06012003 - 16x16, 06012005 - 18x18, 06012007 - 20x20, 06012009 - 25x25, 06012011 - 32x32, 06012013 - 40x40, 06012015 - 50x50, 06012017 - 63x63. PRESS ELBOW 90 WITH MALE thread: 06012103 - 16x½", 06012107 - 16x¾", 06012105 - 18x½”, 06012109 - 20x½", 06012111 - 20x¾", 06012113 - 25x½", 06012115 - 25x¾", 06012117 - 25x1", 06012119 - 32x1", 06012121 - 40x1". PRESS ELBOW 90 WITH FEMALE thread: 06012203 - 16x½", 06012205 - 16x¾", 06012207 - 18x½", 06012209 - 20x½", 06012211 - 20x¾", 06012213 - 25x½", 06012215 - 25x¾", 06012217 - 25x1", 06012219 - 32x1", 06012222 - 40x1½", 06012225 - 50x1½". PRESS ELBOW 90 REDUCER: 06012303 - 20x16, 06012305 - 25x16, 06012307 - 25x20, 06012309 - 32x20, 06012311 - 40x25, 06012313 - 40x32. PRESS ELBOW 90 - TAP CONNECTION: 06012403 - 16x½", 06012404 - 16x½"x16, 06012405 - 18x½", 06012407 - 20x½". PRESS TEE: 06013003 - 16x16x16, 06013005 - 18x18x18, 06013007 - 20x20x20, 06013009 - 25x25x25, 06013011 - 32x32x32, 06013013 - 40x40x40, 06013015 - 50x50x50, 06013017 - 63x63x63.

PRESS TEE WITH REDUCER: 06013103 - 16x25x16, 06013105 - 16x20x16, 06013106 - 16x18x16, 06013107 - 20x16x16, 06013108 - 18x16x16, 06013109 - 20x16x20, 06013110 - 18x16x18, 06013111 - 20x18x20, 06013113 - 20x20x16, 06013115 - 20x25x20, 06013117 - 25x16x25, 06013119 - 25x18x25, 06013121 - 25x20x25, 06013123 - 25x20x20, 06013125 - 25x25x20, 06013127 - 25x32x25, 06013129 - 32x16x32, 06013131 - 32x20x32, 06013133 - 32x25x32, 06013134 - 40x20x40, 06013135 - 40x25x40, 06013137 - 40x32x40, 06013138 - 50x25x50, 06013139 - 50x32x50, 06013141 - 50x40x50, 06013142 - 63x32x63, 06013143 - 63x40x63, 06013145 - 63x50x63. PRESS TEE WITH FEMALE thread: 06013203 - 16x½"x16, 06013205 - 20x½"x20, 06013207 - 20x¾"x20, 06013209 - 25x½"x25, 06013211 - 25x¾"x25, 06013213 - 25x1"x25, 06013215 - 32x¾"x32, 06013217 - 32x1"x32, 06013219 - 40x¾"x40. PRESS TEE WITH MALE thread: 06013303 - 16x½"x16, 06013305 - 20x½"x20. BRASS STOP END PRESS FIT: 06011803 - 16. COMPRESSION COUPLING: 06021001 - 16x16, 06021003 - 20x20 . COMPRESSION COUPLING REDUCER: 06021101 - 20x16, 06021103 - 25x20. MALE COMPRESSION CONNECTION: 06021201 - 16x½", 06021203 - 16x¾", 06021205 - 16x1", 06021207 - 20x½", 06021209 - 20x¾", 06021211 - 20x1". FEMALE COMPRESSION CONNECTION: 06021301 - 16x½", 06021303 - 16x¾", 06021305 - 16x1" , 06021307 - 20x½", 06021309 - 20x¾", 06021311 - 20x1". COMPRESSION ELBOW 90: 06022001 - 16x16, 06022003 - 20x20. COMPRESSION ELBOW 90 WITH MALE thread: 06022101 - 16x½", 06022103 - 16x¾", 06022105 - 20x½", 06022107 - 20x¾". COMPRESS. ELBOW 90 WITH FEMALE thread: 06022201 - 16x½", 06022203 - 16x¾", 06022205 - 20x½", 06022207 - 20x¾". COMPRESSION TEE: 06030201 - 16x16x16, 06030203 - 20x20x20. COMPRESSION TEE WITH REDUCER: 06031201 - 16x25x16, 06031203 - 20x16x20, 06031205 - 20x25x20. COMPRESSION TEE WITH FEMALE thread: 06032201 - 16x½"x16, 06032203 - 20x½"x20, 06032205 - 20x¾"x20. COMPRESSION TEE WITH MALE thread: 06033201 - 16x½"x16, 06033203 - 20x½"x20. COMPRESSION ELBOW 90 - TAP CONN: 06022401 - 16x½"F, 06022403 - 20x½"F. COMPRESSION FOUR WAY FITTING: 06024001 - 16x16x16x16, 06024003 - 20x20x20x20. MULTILAYER PIPE PERT/AL/PERT: 06010103/100 - 16x2, 06010103/200 - 16x2, 06010103/600 - 16x2, 06010103/4 - straight bars 16x2,0, 06010105/200 - 18x2, 06010107/100 - 20x2, 06010107/200 - 20x2, 06010107/4 - straight bars 20x2,0, 06010109/50 - 25x2,5, 06010109/100 - 25x2,5, 06010109/4 - straight bars 25x2,5, 06010111/50 - 32x3, 06010111/4 - straight bars 32x3,0, 06010113 - straight bars 40x4,0, 06010115 - straight bars 50x4,5, 06010117 - straight bars 63x6,0, 06010103/100 - 16x2.

Approval Holder:

Tweetop Sp Z.o.o

Company Name

Tweetop Sp Z.o.o

Address

ul.Ludowa 24 C 71-700 Szczecin Poland

View All Listings by this Company

Instantor range of brass compression fittings for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312342

Size:

8mm, 10mm, 12mm, 15mm, 22mm & 28mm

Marking:

Instantor, size & EN1254-2 on nut. ‘S’ cast on body of tee piece.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Instantor range comprising of models: Straight Coupler 410077 8mm C x C 410088 10mm C x C 410099 12mm C x C 410001 15mm C x C 410002 22mm C x C 410003 28mm C x C Straight Coupler Adaptor 410087 10 x 8mm C x C 410017 15 x 8mm C x C 410098 12 x 10mm C x C 410018 15 x 10mm C x C 410019 15 12mm C x C 410021 22 x 15mm C x C 410022 22mm x 3/4" C x C 410032 28 x 22mm C x C Straight Coupler 411077 8mm x 1/4" C x M.I 411079 8mm x 3/8" C x M.I 411071 8mm x 1/2" C x M.I 411087 10mm x 1/4" C x M.I 411089 10mm x 3/8" C x M.I 411081 10mm x 1/2" C x M.I Straight Coupler 411019 15mm x 3/8" C x M.I 411001 15mm x 1/2" C x M.I 411012 15mm x 3/4" C x M.I 411021 22mm x 1/2" C x M.I 411002 22mm x 3/4" C x M.I 411023 22mm x 1" C x M.I 411032 28mm x 3/4" C x M.I 411003 28mm x 1" C x M.I Straight Coupler 412079 8mm x 3/8" C x F.I. 412087 10mm 1/4" C x F.I. 412081 10mm x 1/2" C x F.I. 412089 10mm x 3/8" C x F.I. 412091 12mm x 1/2" C x F.I. 412019 15mm x 3/8" C x F.I. 412001 15mm x 1/2" C x F.I. 412012 15mm x 3/4" C x F.I. 412021 22mm x 1/2" C x F.I. 412002 22mm x 3/4" C x F.I. 412023 22mm x 1" C x F.I. 412032 28mm x 3/4" C x F.I. 412003 28mm x 1" C x F.I. Elbow 415077 8mm C x C 415088 10mm C x C 415001 15mm C x C 415002 22mm C x C 415003 28mm C x C 415021 22mm x 15mm C x C Elbow 416087 10mm x 1/4" C x M.I. 416089 10mm x 3/8" C x M.I. 416081 10mm x 1/2" C x M.I. 416001 15mm x 1/2" C x M.I. 416012 15mm x 3/4" C x M.I. 416021 22mm x 1/2" C x M.I. 416002 22mmx 3/4" C x M.I. 416023 22mm x 1" C x M.I. 416032 28mm x 3/4" C x M.I. 416003 28mm x 1" C x M.I. Elbow 417001 15mm x 1/2" C x F.I. 417021 22mm x 1/2" C x F.I. 417002 22mm x 3/4" C x F.I. 417023 22mm x 1" C x F.I. 417003 28mm x 1" C x F.I. 417012 3/4" x 15mm F.I. x C Equal Tee's 418777 8mm C x C x C 418888 10mm C x C x C 418001 15mm C x C x C 418002 22mm C x C x C 418003 28mm C x C x C Reducing Tee's 418211 22 x 15 x 15mm C x C x C 418212 22 x 15 x 22mm C x C x C 418221 22 x 22 x 15mm C x C x C 418313 28 x 15 x28mm C x C x C 418331 28 x 28 x 15mm C x C x C 418322 28 x 22 x 22mm C x C x C 418323 28 x 22 x 28mm C x C x C 418332 28 x 28 x 22mm C x C x C Wallplate Elbow 419001 15mm x 1/2" C x F.I. 421001 15mm x 1/2" C x F.I. HD 421002 22mm x 3/4" C x F.I. HD 430001 15mm x 15mm x 1/2" 430 Tee C x C x F.I 430002 22mm x 22mm x 3/4" 430 Tee C x C x F.I Stop End Compression 451007 8mm 451008 10mm 451001 15mm 451002 22mm 451003 28mm Compression Nut 478008 10mm 478A 478009 12mm 478A 478001 15mm 478A 478002 22mm 478A 478003 28mm 478A Compression Ring 479007 8mm 478B 479008 10mm 478B 479001 15mm 478B 479002 22mm 478B 479003 28mm 478B

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company

NORMA MARLIN range of fittings for use with PE pipes (manufactured to EN12201-2). Supplied with a plastic pipe support liner For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310386

Size:

see model

Marking:

Norma Marlin, made in Italy, size and PN on fitting nut.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

B075020016G 90° reducing tee 20X20X16 B075025020G 90° reducing tee 25x25x20 B075032025G 90° reducing tee 32x32x25 B075040032G 90° reducing tee 40x40x32 B075050040G 90° reducing tee 50x50x40 B075063050G 90° reducing tee 63x63x50 B075075063G 90° reducing tee 75x75x63 B075090075G 90° reducing tee 90x90x75 B075110090G 90° reducing tee 110x110x90 B075110063G 90° reducing tee 110x63x110 B080016016G 90° tee 16x16x16 B080020020G 90° tee 20x20x20 B080025025G 90° tee 25x25x25 B080032032G 90° tee 32x32x32 B080040040G 90° tee 40x40x40 B080050050G 90° tee 50x50x50 B080063063G 90° tee 63x63x63 B080075075G 90° tee 75x75x75 B080090090G 90° tee 90x90x90 B080110110G 90° tee 110x110x110 B08501600BG 90° tee with female thread 16X16X1/2" B08501600CG 90° tee with female thread 16x16x3/4" B08502000BG 90° tee with female thread 20X20X1/2" B08502000CG 90° tee with female thread 20X20X3/4" B08502500BG 90° tee with female thread 25X25X1/2" B08502500CG 90° tee with female thread 25X25X3/4" B08502500DG 90° tee with female thread 25X25X1" B08503200BG 90° tee with female thread 32X32X1/2" B08503200CG 90° tee with female thread 32X32X3/4" B08503200DG 90° tee with female thread 32X32X1" B08503200EG 90° tee with female thread 32X32X1"1/4 B08504000DG 90° tee with female thread 40X40X1" B08504000EG 90° tee with female thread 40X40X1"1/4 B08504000FG 90° tee with female thread 40X40X1"1/2 B08505000EG 90° tee with female thread 50X50X1"1/4 B08505000FG 90° tee with female thread 50x50x1"1/2 B08505000GG 90° tee with female thread 50x50x2" B08506300FG 90° tee with female thread 63x63x1"1/2 B08506300GG 90° tee with female thread 63x63x2" B08506300IG 90° tee with female thread 63x63x2"1/2 B08507500GG 90° tee with female thread 75x75x2" B08507500I G 90° tee with female thread 75x75x2"1/2 B08507500LG 90° tee with female thread 75x75x3" B08509000IG 90° tee with female thread 90x90x2"1/2 B08509000LG 90° tee with female thread 90x90x3" B08511000LG 90° tee with female thread 110x110x3" B08511000MG 90° tee with female thread 110x110x4" B09001600BG 90° tee with male thread 16x16x1/2" B09001600CG 90° tee with male thread 16x16x3/4" B09002000BG 90° tee with male thread 20x20x1/2" B09002000CG 90° tee with male thread 20x20x3/4" B09002500BG 90° tee with male thread 25x25x1/2" B09002500CG 90° tee with male thread 25x25x3/4" B09002500DG 90° tee with male thread 25x25x1" B09003200BG 90° tee with male thread 32x32x1/2" B09003200CG 90° tee with male thread 32x32x3/4" B09003200DG 90° tee with male thread 32x32x1" B09003200EG 90° tee with male thread 32x32x1"1/4 B09004000DG 90° tee with male thread 40x40x1" B09004000EG 90° tee with male thread 40x40x1"1/4 B09004000FG 90° tee with male thread 40x40x1"1/2 B09005000EG 90° tee with male thread 50x50x1"1/4 B09005000FG 90° tee with male thread 50x50x1"1/2 B09005000GG 90° tee with male thread 50x50x2" B09006300FG 90° tee with male thread 63x63x1"1/2 B09006300GG 90° tee with male thread 63x63x2" B09006300IG 90° tee with male thread 63x63x2"1/2 B09007500IG 90° tee with male thread 75x75x2"1/2 B09007500LG 90° tee with male thread 75x75x3" B09009000LG 90° tee with male thread 90x90x3" B09011000MG 90° tee with male thread 110x110x4" B09501600BG male adaptor 16x1/2" B09501600CG male adaptor 16x3/4" B09502000BG male adaptor 20x1/2" B09502000CG male adaptor 20x3/4" B09502500BG male adaptor 25x1/2" B09502500CG male adaptor 25x3/4" B09502500DG male adaptor 25x1" B09503200BG male adaptor 32x1/2" B09503200CG male adaptor 32x3/4" B09503200DG male adaptor 32x1" B09503200EG male adaptor 32x1"1/4 B09503200FG male adaptor 32x1"1/2 B09504000DG male adaptor 40x1" B09504000EG male adaptor 40x1"1/4 B09504000FG male adaptor 40x1"1/2 B09504000GG male adaptor 40x2" B09505000EG male adaptor 50x1"1/4 B09505000FG male adaptor 50x1"1/2 B09505000GG male adaptor 50x2" B09506300EG male adaptor 63x1"1/4 B09506300FG male adaptor 63x1"1/2 B09506300GG male adaptor 63x2" B09506300IG male adaptor 63x2"1/2 B09507500GG male adaptor 75x2" B09507500IG male adaptor 75x2"1/2 B09507500LG male adaptor 75x3" B09509000GG male adaptor 90x2" B09509000IG male adaptor 90x2"1/2 B09509000LG male adaptor 90x3" B09509000MG male adaptor 90x4" B09511000GG male adaptor 110x2" B09511000LG male adaptor 110x3" B09511000MG male adaptor 110x4" B10001600BG female adaptor 16x1/2" B10001600CG female adaptor 16x3/4" B10002000BG female adaptor 20x1/2" B10002000CG female adaptor 20x3/4" B10002500BG female adaptor 25x1/2" B10002500CG female adaptor 25x3/4" B10002500DG female adaptor 25x1" B10003200BG female adaptor 32x1/2" B10003200CG female adaptor 32x3/4" B10003200DG female adaptor 32x1" B10003200EG female adaptor 32x1"1/4 B10004000DG female adaptor 40x1" B10004000EG female adaptor 40x1"1/4 B10004000FG female adaptor 40x1"1/2 B10005000EG female adaptor 50x1"1/4 B10005000FG female adaptor 50x1"1/2 B10005000GG female adaptor 50x2" B10006300FG female adaptor 63x1"1/2 B10006300GG female adaptor 63x2" B10006300IG female adaptor 63x2"1/2 B10007500GG female adaptor 75x2" B10007500IG female adaptor 75x2"1/2 B10007500LG female adaptor 75x3" B10009000GG female adaptor 90x2" B10009000IG female adaptor 90x2"1/2 B10009000LG female adaptor 90x3" B10009000MG female adaptor 90x4" B10011000GG female adaptor 110x2" B10011000LG female adaptor 110x3" B10011000MG female adaptor 110x4" B105016000G coupling 16 B105020000G coupling 20 B105025000G coupling 25 B105032000G coupling 32 B105040000G coupling 40 B105050000G coupling 50 B105063000G coupling 63 B105075000G coupling 75 B105090000G coupling 90 B105110000G coupling 110 B106020000G repair coupling 20 B106025000G repair coupling 25 B106032000G repair coupling 32 B106040000G repair coupling 40 B106050000G repair coupling 50 B106063000G repair coupling 63 B106075000G repair coupling 75 B106090000G repair coupling 90 B106110000G repair coupling 110 B110020016G reducing coupling 20x16 B110025016G reducing coupling 25x16 B110025020G reducing coupling 25x20 B110032020G reducing coupling 32x20 B110032025G reducing coupling 32x25 B110040025G reducing coupling 40x25 B110040032G reducing coupling 40x32 B110050032G reducing coupling 50x32 B110050040G reducing coupling 50x40 B110063032G reducing coupling 63x32 B110063040G reducing coupling 63x40 B110063050G reducing coupling 63x50 B110075050G reducing coupling 75x50 B110075063G reducing coupling 75x63 B110090063G reducing coupling 90x63 B110090075G reducing coupling 90x75 B110110063G reducing coupling 110x63 B110110075G reducing coupling 110x75 B110110090G reducing coupling 110x90 B115016000G plug 16 B115020000G plug 20 B115025000G plug 25 B115032000G plug 32 B115040000G plug 40 B115050000G plug 50 B115063000G plug 63 B115075000G plug 75 B115090000G plug 90 B115110000G plug 110 B120016000G 90° elbow 16 B120020000G 90° elbow 20 B120025000G 90° elbow 25 B120032000G 90° elbow 32 B120040000G 90° elbow 40 B120050000G 90° elbow 50 B120063000G 90° elbow 63 B120075000G 90° elbow 75 B120090000G 90° elbow 90 B120110000G 90° elbow 110 B12501600BG 90° elbow with female thread 16x1/2" B12501600CG 90° elbow with female thread 16x3/4" B12502000BG 90° elbow with female thread 20x1/2" B12502000CG 90° elbow with female thread 20x3/4" B12502500BG 90° elbow with female thread 25x1/2" B12502500CG 90° elbow with female thread 25x3/4" B12502500DG 90° elbow with female thread 25x1" B12503200BG 90° elbow with female thread 32x1/2" B12503200CG 90° elbow with female thread 32x3/4" B12503200DG 90° elbow with female thread 32x1" B12503200EG 90° elbow with female thread 32x1"1/4 B12504000DG 90° elbow with female thread 40x1" B12504000EG 90° elbow with female thread 40x1"1/4 B12504000FG 90° elbow with female thread 40x1"1/2 B12505000EG 90° elbow with female thread 50x1"1/4 B12505000FG 90° elbow with female thread 50x1"1/2 B12505000GG 90° elbow with female thread 50x2" B12506300FG 90° elbow with female thread 63x1"1/2 B12506300GG 90° elbow with female thread 63x2" B12506300IG 90° elbow with female thread 63x2"1/2 B12507500IG 90° elbow with female thread 75x2"1/2 B12507500LG 90° elbow with female thread 75x3" B12509000LG 90° elbow with female thread 90x3" B12509000MG 90° elbow with female thread 90x4" B12511000MG 90° elbow with female thread 110x4" B13001600BG 90° elbow with male thread 16x1/2" B13001600CG 90° elbow with male thread 16x3/4" B13002000BG 90° elbow with male thread 20x1/2" B13002000CG 90° elbow with male thread 20x3/4" B13002500BG 90° elbow with male thread 25x1/2" B13002500CG 90° elbow with male thread 25x3/4" B13002500DG 90° elbow with male thread 25x1" B13003200BG 90° elbow with male thread 32x1/2" B13003200CG 90° elbow with male thread 32x3/4" B13003200DG 90° elbow with male thread 32x1" B13003200EG 90° elbow with male thread 32x1"1/4 B13004000DG 90° elbow with male thread 40x1" B13004000EG 90° elbow with male thread 40x1"1/4 B13004000FG 90° elbow with male thread 40x1"1/2 B13005000EG 90° elbow with male thread 50x1"1/4 B13005000FG 90° elbow with male thread 50x1"1/2 B13005000GG 90° elbow with male thread 50x2" B13006300FG 90° elbow with male thread 63x1"1/2 B13006300GG 90° elbow with male thread 63x2" B13006300IG 90° elbow with male thread 63x2"1/2 B13007500GG 90° elbow with male thread 75x2"1/2 B13007500LG 90° elbow with male thread 75x3" B13009000LG 90° elbow with male thread 90x3" B13009000MG 90° elbow with male thread 90x4" B13011000MG 90° elbow with male thread 110x4" B13405000GG victaulic 50x2" B13406300GG victaulic 63x2" B13411000MG victaulic 110x4" B13505000FG flange adaptor 50x1"1/2 B13505000GG flange adaptor 50x2" B13506300GG flange adaptor 63x2" B13507500IG flange adaptor 75x2"1/2 B13509000LG flange adaptor 90x3" B13509000MG flange adaptor 90x4" B13511000MG flange adaptor 110x4"

Approval Holder:

NORMA GROUP HOLDING GMBH- EMEA

Company Name

NORMA GROUP HOLDING GMBH- EMEA

Address

EDISONSTR. 4 D- 63477 MAINTAL

Country

Germany

View All Listings by this Company

JG Speedfit range of push-fit fittings and manifolds for use with Polybutylene Barrier Pipe (manufactured to BS EN 7291-2:2010 ) and PEX Barrier Pipe (manufactured to BS EN 7291-3:2010) and Copper Pipe (manufactured to BS EN1057:). Operating parameters: 12.5 bar@20°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312020

Note:

R008 to applies to models 15PWB and CM551516W

Size:

10mm – 22mm push-fit. 5/8” push-fit & ¾” push-fit. ½” & ¾” BSP.

Marking:

John Guest logo and size on body

Installation Requirements:

R001 R008

Expiry date:

31/12/2028

Model:

FEMALE COUPLER TAP CONNECTOR BSP THREAD PSE3210W 10mm x 1/2" BSP FEMALE PSE3201W 15mm x 1/2" BSP FEMALE PSE3203W 15mm x 3/4" BSP FEMALE PSE3202W 22mm x 3/4" BSP FEMALE STOP END PSE4610W 10mm PSE4615W 15mm PSE4622W 22mm PSE4628W 28mm 4 WAY MANIFOLD SFM512210E 22 x 10mm 4 PORT RAIL MANIFOLD SFM522210E 22mm x 10mm SFM522215E 22mm x 15mm BACK PLATE ELBOW 15PWB: 15mm x 1/2" BSP BULKHEAD ELBOW CM551516W: 15mm x 3/4" BSP CONVERSION CONNECTOR: NC471: ½” ID (Imperial) x 15mm Push-fit NC2324: ¾” ID (Imperial) x 22mm Push-fit

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

‘AquaGas M range’ of copper and brass press fit fittings with NBR ‘O’-rings for use with copper tube (manufactured to BS EN 1057). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312074

Size:

15 - 54mm. ½” - 2” BSP (M)/(F).

Marking:

PCC GmbH logo (PC), DVGW, size and date of manufacture (YY-MM) on fitting body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Press-Copper AquaGas M range: Brass (15-28mm) or Copper (35-54mm) fittings: 79010: Straight Male Adapter, 79020: Straight Female Adapter. Copper fittings: 79000: Straight Coupling, 79030: Straight Reducer, 79040: Slip Coupler, 79100: Equal Tee, 79110: Reduced Tee, 79120: Female Tee, 79200: Bend 90° ff, 79210: Bend 90° mf, 79230: Bend 45° ff, 79240: Bend 45° mf, 79410: End Cap, 79430: Male Reducer.

Approval Holder:

PCC GmbH

Company Name

PCC GmbH

Address

Dusseldorfer Strasse 15, D-71332 Wailblingen

Country

Germany

View All Listings by this Company

‘DELBRAZE’ range of copper and copper alloy braze fittings for use with copper pipe (EN1057). Maximum working pressure: 16 bar. Maximum working temperature: 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2311066

Size:

See models. Note all sizes are the diameter of the fitting for brazing unless otherwise states.

Marking:

Conex logo >B< and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

5270 – Straight Coupler: 5270 067000000 – 67mm, 5270 06700000L – 67mm long, 5270 076000000 – 76mm, 5270 108000000 – 108mm, 5270 133000000 – 133mm, 5270 159000000 – 159mm. 5243 – Fitting Reducer: 5243 067028000 – 67mm x 28mm, 5243 067035000 – 67mm x 35mm, 5243 067042000 – 67mm x 42mm, 5243 067054000 – 67mm x 54mm, 5243 076035000 – 76mm x 35mm, 5243 076042000 – 76mm x 42mm, 5243 076054000 – 76mm x 54mm, 5243 076067000 – 76mm x 67mm, 5243 108054000 – 108mm x 54mm, 5243 108076000 – 108mm x 76mm, 5243 133108000 – 133mm x 108mm, 5243 159108000 – 159mm x 108mm, 5243 159133000 – 159mm x 133mm. 5009 – Metric to imperial: 5009 076024000 – 76mm x 3”, 5009 108032000 – 108mm x 4”. 5240 – Reduced Coupler: 5240 067028000 – 67mm x 28mm, 5240 067042000 – 67mm x 42mm, 5240 067054000 – 67mm x 54mm, 5240 067054000L – 67mm x 54mm, 5240 076028000 – 76mm x 28mm, 5240 076035000 – 76mm x 35mm, 5240 076042000 – 76mm x 42mm, 5240 076054000 – 76mm x 54mm, 5240 108054000 – 108mm x 54mm, 5240 108076000 – 108mm x 76mm, 5240 133108000 – 133mm x 108mm. 5041 – 45 Deg Obtuse Elbow: 5041 067000000 – 67mm, 5041 067000000L – 67mm, 5041 076000000 – 76mm, 5041 108000000 – 108mm, 5041 133000000 – 133mm, 5041 159000000 – 159mm. 5040 – Obtuse Street Elbow: 5040 067000000 – 67mm, 5040 067000000L – 67mm, 5040 076000000 – 76mm, 5040 108000000 – 108mm, 5040 133000000 – 133mm. 5090 – 90Deg Elbow: 5090 067000000 – 67mm, 5090 076000000 – 76mm, 5090 108000000 – 108mm. 5092 – Street Elbow: 5092 067000000 – 67mm. 5001A – Street Bend: 5001A067000000 – 67mm, 5001A067000000L – 67mm, 5001A076000000 – 76mm, 5001A108000000 – 108mm, 5001A133000000 – 133mm, 5001A159000000 – 159mm. 5002A – Street Elbow: 5002A067000000 – 67mm, 5002A067000000L – 67mm, 5002A076000000 – 76mm, 5002A108000000 – 108mm, 5002A133000000 – 133mm, 5002A159000000 – 159mm. 5130 – Equal Tee: 5130 067067067 – 67mm, 5130 076076076 – 76mm, 5130 108108108 – 108mm, 5130 133133133 – 133mm, 5130 159159159 – 159mm, 5130 067067067L – 67mm. 5130 – Reduced Branch Tee: 5130 067022067 – 67mm x 67mm x 22mm, 5130 067028067 – 67mm x 67mm x 28mm, 5130 067035067 – 67mm x 67mm x 35mm, 5130 067042067 – 67mm x 67mm x 42mm, 5130 067054067 – 67mm x 67mm x 54mm, 5130 076022076 – 76mm x 76mm x 22mm, 5130 076028076 – 76mm x 76mm x 28mm, 5130 076035076 – 76mm x 76mm x 35mm, 5130 076042076 – 76mm x 76mm x 42mm, 5130 076054076 – 76mm x 76mm x 54mm, 5130 076067076 – 76mm x 76mm x 67mm, 5130 108028108 – 108mm x 108mm x 28mm, 5130 108035108 – 108mm x 108mm x 35mm, 5130 108042108 – 108mm x 108mm x 42mm, 5130 108054108 – 108mm x 108mm x 54mm, 5130 108067108 – 108mm x 108mm x 67mm, 5130 108076108 – 108mm x 108mm x 76mm, 5130 133108133 – 133mm x 133mm x 108mm, 5130 159108159 – 159mm x 159mm x 108mm. 5301 – Stop End: 5301 067000000 – 67mm, 5301 067000000L – 67mm, 5301 076000000 – 76mm, 5301 108000000 – 108mm, 5301 133000000 – 133mm, 5301 159000000 – 159mm. 4270G – Female Straight Connector: 4270G067020000 – 67mm x 2.1/2” BSP (F). 4243G – Male Straight Connector: 4243G067020000 – 67mm x 2.1/2” BSP (M) 4243G076024000 – 76mm x 3” BSP (M), 4243G108032000 – 108mm x 4” BSP (M).

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of pipe repair clamps incorporating EPDM double seals. The products are intended for use with stainless steel pipe manufactured to EN1124. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2312067

Size:

See models

Marking:

Dalian logo and size on clamp body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

CR-XXX Where XXX denotes the size and can be replaced with any of the following: 50 = DN50, 65 = DN65, 80 = DN80, 100 = DN100, 150 = DN150, 200 = DN200, 250 = DN250, 300 = DN300, 350 = DN350, 400 = DN400, 500 = DN500, 600 = DN600, 700 = DN700, 800 = DN800.

Approval Holder:

Dalian Zhuhong Mechanical Co. Ltd.

Company Name

Dalian Zhuhong Mechanical Co. Ltd.

Address

Floor 1-4,No.366,Xiaoyanjia Building, Hongta Village,Yongzheng Street, Jinzhou District,Dalian City,Liaoning Province, CHINA

Country

China

View All Listings by this Company

Manufacturer:

Dalian Zhuhong Mechanical Co. Ltd.

Company Name

Dalian Zhuhong Mechanical Co. Ltd.

Address

Floor 1-4,No.366,Xiaoyanjia Building, Hongta Village,Yongzheng Street, Jinzhou District,Dalian City,Liaoning Province, CHINA

Country

China

View All Listings by this Company

Range of manually operated dual flush WC outlet valves. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2310393

Size:

1 ½” BSP (M), 2” BSP (M).

Marking:

Wirquin moulded on body.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

31/10/2028

Model:

B24004 NABIS manually operated dual flush WC outlet valves.

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company