Directory Search Results

Print List

#241055005

'E8083AA'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
241055005
Expiry date:
31/10/2029

Approval Holder:
Ge Mao Rubber Industrial Co. Ltd.
Company Name
Ge Mao Rubber Industrial Co. Ltd.
Address
No15, Kung-Yeh East 4th Road, Lu-Kang, Chang Hua, Taiwan
Country
China
Phone
+886 4781 0288 Fax: +886 4781 0289

View All Listings by this Company

Print This Approval


#2012931

BS EN 14055 (2018) concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve discharging via a type AG airgap and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. The cistern is operated by manual push button/push plate. The side entry inlet valve is mounted internally and is supplied via a stainless steel braided EPDM lined flexible hose assembly which incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012931
Size:
½” BSP Male or 15mm push-fit.
Marking:
Dudley, TD Logo & Thomas Dudley Ltd. on inspection cover. ‘TD’, on top of outlet drop valve. ‘HYDROFLO’ on discharge cap of inlet valve. ‘DUDLEY BS 1212/4’ on nut of inlet valve.
Installation Requirements:
R001 R280 R556
Expiry date:
31/12/2025
Model:
Element Cistern

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#240704706

Spring loaded in-line check valve cartridges for insertion into pipes and fittings with specifically sized bores. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
240704706
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50
Marking:
Neoperl, WRAS & DN on body
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
31.4251.0 NV50/DN50 & 31.0020.0; NV50/DN50-EPDM.
Product Images

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#240702031

Range of quarter turn ceramic disc or non-rising spindle headworks (see models) with brass bodies and EPDM `O` rings for insertion into specifically dimensioned bores. Maximum working pressure; 10 Bar Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
240702031
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (M)
Marking:
Avonflow, WRAS and date of manufacture (DD/MM/YY) on body
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
¼ Turn Ceramic Modes: C06029H005A-X C06029H006A-X C06029H007A-X TTDMCV2-X Non Rising Spindle Models: TT13CV2-X TC06V2 Where X denotes the closing direction and water supply, and can be replaced with either: C = Cold water, clockwise closing H = Hot water, anti-clockwise closing
Product Images

Approval Holder:
JIANGXI AVONFLOW HVAC TECH CO., LTD.
Company Name
JIANGXI AVONFLOW HVAC TECH CO., LTD.
Address
Xuri Area Shangrao Economic Development Zone, Jiangxi Province

View All Listings by this Company
Manufacturer:
JIANGXI AVONFLOW HVAC TECH CO., LTD.
Company Name
JIANGXI AVONFLOW HVAC TECH CO., LTD.
Address
Xuri Area Shangrao Economic Development Zone, Jiangxi Province

View All Listings by this Company

Print This Approval


#240804003

Integrated magnetic headwork with EPDM ‘O’-rings and gaskets for insertion into specifically dimensioned bores. The headwork is operated by a push-button that moves a magnetic pillar, which in turn attracts the magnetic seal ring causing the valve to open, when the button is released the magnetic pillar travels back and the seal ring returns and the valve closes. The product incorporates a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
240804003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
24.06mm OD.
Marking:
XFZ etched on internal sheath.
Installation Requirements:
R001
Expiry date:
31/08/2029
Model:
8-00-005 Integrated Magnetic Cartridge.

Approval Holder:
Huangshi Xingfa Technology Co Ltd
Company Name
Huangshi Xingfa Technology Co Ltd
Address
4th Floor Building 9 Jinhe S& T Industrial Park
Country
no 199

View All Listings by this Company
Manufacturer:
Huangshi Xingfa Technology Co Ltd
Company Name
Huangshi Xingfa Technology Co Ltd
Address
4th Floor Building 9 Jinhe S& T Industrial Park
Country
no 199

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 353 of 444

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.