Directory Search Results

Print List

#250808001

Solar range of auto air-vent valves (chromium plated brass) and a plastic float. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
250808001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
For non-wholesome water use only.
Size:
See models
Marking:
Caleffi Solar, max temp & max pressure on body. Caleffi logo on cap.
Installation Requirements:
R001
Expiry date:
31/08/2030
Model:
250031 – 3/8” BSP (M), 250131SD – 3/8” BSP (M), 250131VLL – 3/8” BSP (M), 250131 – 3/8” BSP (M), 250131HRM – 3/8” BSP (M), 250041A – ½” NPTF, 250041 – ½” BSP (M), 250831 – 3/8” BSP (M), 250931 - 3/8” BSP (M), 250133 - 3/8” BSP (M).

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#241202040

Range of wall mounted, concealed thermostatic shower valves (plastic bodies),2 way or 3 way function incorporating push button headworks controlling the flow to either shower outlets. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241202040
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
For use with Grohe rough kit 35.600 or 35.5604 which has 1/2" BSP (F) inlets and outlets
Marking:
Grohe logo on faceplate
Installation Requirements:
R001 R040
Expiry date:
31/12/2029
Model:
29.507.xxx 29.508.xxx Must be installed in combination with Grohe Rapido SmartBox 35.600 or 35.5604 Where xxx denotes finish, can be replaced by: 000 – Chrome KF0 – phantom black
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#241204018

Wall mounted, concealed, thermostatic blending valve incorporating a thermostatic cartridge with a dome operating member and supplied with a trim set. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241204018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Keuco on back plate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2029
Model:
59553 xx00zz Trim set 59553 000070 Concealed valve xx = 01 chrome plated; 02 polished bronze; 03 brushed bronze; 04 polished nickel; 05 brushed nickel; 07 stainless steel finish; 12 polished black chrome; 13 brushed black chrome; 17 aluminium finish; 37 black matt zz = 01 rosette round; 02 rosette squared
Product Images

Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265

View All Listings by this Company

Print This Approval


#241202011

Range of flanged, lugged or wafer butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
241202011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
JDF112: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200 (flanged type). Sizes added July 2025: DN1400, DN1500, DN1600, DN1800, DN2000 (flanged type). JDL112: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200 (lugged type). JDA112: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200 (wafer type).
Marking:
Company logo (Tianjin Jiaxiang Tauri), DN & PN16 on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
JDF112, JDL112 & JDA112.
Product Images

Approval Holder:
TIANJIN JIAXIANG TAIRUI VALVE CO., LTD.
Company Name
TIANJIN JIAXIANG TAIRUI VALVE CO., LTD.
Address
No. 26, Zhenghe Road, Beizhakou Electronic Industrial Park, Jinnan District, Tianjin

View All Listings by this Company

Print This Approval


#241202049

Range of lugged, semi lugged, wafer type or U shaped (see models) butterfly valves with a blue epoxy coated cast iron body, EPDM seat and either a stainless steel, bronze, EUROKOTE - EBONITE or blue epoxy coated iron disc (see models). Maximum working pressure 6.0, 10.0 or 25.0 Bar (See models) Maximum operating temperature 23.0 or 60.0°C (See models)

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
241202049
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Flanged connection, see models
Marking:
KSB, logo and product info on data plate.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
BOAX B Range. Available in: Lugged, Semi Lugged, Wafer type or U Shaped. 10.0 Bar or 16.0 Bar. 23°C or 60°C. DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN650, DN700, DN750, DN800, DN900 or DN1000. ISORIA 10 and ISORIA 16 Range. Available in: Lugged, Semi Lugged, Wafer type or U Shaped. 10.0 Bar or 16.0 Bar. 23°C or 60°C. DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN650, DN700, DN750, DN800, DN900 or DN1000. ISORIA 20 Range: Available in: Lugged, Semi Lugged, Wafer type or U Shaped. 20.0 Bar. 23°C or 60°C. DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 & DN600. ISORIA 25 Range: Available in: Lugged, Semi Lugged, Wafer type or U Shaped. 25.0 Bar. 23°C or 60°C. DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 & DN600. MAMMOUTH 6 Range. Available in: Lugged, Semi Lugged, Wafer type or U Shaped. 6.0 Bar. 23°C or 60°C. DN1500, DN60”, DN1600, DN66”, DN1800, DN72”, DN78”, DN2000, DN84”, DN2200, DN90”, DN2400, DN96”, DN102”, DN2600. MAMMOUTH 10 Range. Available in: Lugged, Semi Lugged, Wafer type or U Shaped. 10.0 Bar. 23°C or 60°C. DN1200, DN48”, DN50”, DN1300, DN52”, DN54”, DN1400, DN1500, DN60”, DN1600, DN66”, DN1800, DN72”, DN78”, DN2000, DN84”.
Product Images

Approval Holder:
KSB SAS
Company Name
KSB SAS
Address
Zone Industriale de Gagnaire Fonseche, 24490 LA ROCHE CHALAIS
Country
France
Phone
(+33) 553 92 44 00

View All Listings by this Company

Print This Approval


#241202059

Range of lugged or wafer butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
241202059
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
EJV, DN & PN16 on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
EJBVF500: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200(flanged type) EJBVL200: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200(lugged type) EJBVW100: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200, DN1400, DN1500, DN1600, DN1800 & DN2000. (flanged type)

Approval Holder:
SUZHOU EJ INDUSTRY CO., LTD
Company Name
SUZHOU EJ INDUSTRY CO., LTD
Address
Room 801 Building A, Building 44,Hefeng Science and Technology Innovation Park, NO.2 Taishan Road High-tech Zone Suzhou city, Jiangsu Province
Country
China

View All Listings by this Company

Print This Approval


#240402085

Range of butterfly valves with an epoxy coated ductile iron body, stainless steel disc and single lever or handwheel operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
240402085
Size:
DN 40 to DN 300 flanged connections.
Marking:
JET, size, PN and serial number on data plate on body.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
JET RANGE 111016 111017 111018 111019 111020 111021 111022

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#241215010

Range of angle valves with chromium plated brass bodies, incorporating a quarter turn ceramic disc housed within a plastic inner body. The products are available with a variety of dome type operating members. Maximum working pressure 16.0 bar. Maximum operating pressure 85°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
241215010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) x ½” BSP (M).
Marking:
HENT on body and operating member.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
14618276-000-1, 14618276-000-2, 14618249-000-1, 14618249-000-2, 14618097-000-1, 14618097-000-2, 14618281-000-1, 14618281-000-2, 14618269-000-1, 14618269-000-2, 14618270-000-1, 14618270-000-2, 14618282-000-1, 14618282-000-2, 14618228-000-1, 14618228-000-2, 14618278-000-1, 14618278-000-2, 14618251-000-1, 14618251-000-2, 14618094-000-1, 14618094-000-2, 14618050-400-1 & 14618050-400-2.
Product Images

Approval Holder:
Guangdong Hent Technology Co., Ltd
Company Name
Guangdong Hent Technology Co., Ltd
Address
No. 28 Pingsha Dadao Zhishan Industrial Area Heshan City 529729 Guangdong
Country
China

View All Listings by this Company
Manufacturer:
Guangdong Hent Technology Co., Ltd
Company Name
Guangdong Hent Technology Co., Ltd
Address
No. 28 Pingsha Dadao Zhishan Industrial Area Heshan City 529729 Guangdong
Country
China

View All Listings by this Company

Print This Approval


#240904734

Range of in-line, manually adjustable pressure reducing valves with nickel plated DZR brass body. Maximum inlet supply pressure 25 bar. Maximum operating temperature 80°C

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
240904734
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
Pegler logo (Brand of Aalberts), DN, DR, PN and flow arrow on body
Installation Requirements:
R001 R120
Expiry date:
30/09/2029
Model:
5A2091 - ½” PRV6PT DZR Prs Red Vlv NP FXF– CR (DZR) 1.0 to 5.5 bar G ½“, 5A2092 - ¾” PRV6PT DZR Prs Red Vlv NP FXF (DZR) 1.0 to 5.5 bar G ¾“, 5A2093 – 1” PRV6PT DZR Pres Red Vlv NP FXF (DZR) 1.0 to 5.5 bar G 1”, 5A2094 – 1.1/4” PRV6PT DZR PRV NP FXF (DZR) 1.5 to 5.5 bar G 1 ¼“, 5A2095 – 1.1/2” PRV6PT DZR PRV NP FXF (DZR) 1.5 to 5.5 bar G 1 ½“, 5A2096 – 2” PRV6PT DZR PRV NP FXF (DZR) 1.5 to 5.5 bar G 2”, 5A2097 – 2.1/2” PRV6PT DZR PRV NP FXF(DZR) 1.5 to 5.5 bar G 2 ½“, 5A2098 – 3” PRV6PT DZR PRV NP FXF 1.5 to 5.5 bar light. G 3”, 5A2099 – 4” PRV6PT DZR PRV NP FXF (DZR) 1.5 to 5.5 bar G 4”.

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#241204731

Range of pressure reducing valves with DZR brass or bronze bodies and manually adjustable outlet pressure range between 2.5bar to 6.0bar. Maximum working pressure: 25.0 bar. Maximum operating temperature 80°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
241204731
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
VIR, CR, PN, size & flow arrow on body.
Installation Requirements:
R001 R120
Expiry date:
31/12/2029
Model:
9610DR DN15 (1/2” BSP (F)), DN20 (3/4” BSP (F)), DN25 (1” BSP (F)), DN32 (1 1/4” BSP (F)), DN40 (1 1/2” BSP (F)), DN50 (2” BSP (F)).

Approval Holder:
VIR Valvoindustria Ing. Rizzio S.p.A.
Company Name
VIR Valvoindustria Ing. Rizzio S.p.A.
Address
Via Circonvallazione n. 10, 13018 Valduggia (VC)
Country
Italy

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 351 of 413

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.