Range of filling loop assemblies, incorporating a stainless steel braided EPDM lined flexible hose, brass bodied isolation valve and a DZR brass non-verifiable double check valve assembly that incorporates an isolation valve. Model FL12041510 has a lanyard and end caps. Maximum working pressure 10 bar. Maximum operating temperature 85°C

Section:

1015 Filling Loop

WRAS Approval Number:

240204702

Note:

To be used with copper pipe only to BS EN 1057

Size:

15mm Compression

Marking:

Intatec logo, flow arrow & CR on double check valve. Intatec logo, WRAS & year of manufacture (yyyy) on crimp connector

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

FL12041510 FL12041500 111341 111342 135202 120416.1 00107125

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Carbon block filter cartridge with plastic body. Maximum working pressure 8.2 bar. Cold water use. In April 2024 a filter head was added to the approval.

Section:

1055 Filter Cartridges

Size:

32.94mm ØD In April 2024, with the addition of the filter head, the size becomes ¼” Push Fit.

Marking:

Spectrum, model and technical information on adhesive label on body.

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/12/2028

Model:

Spectrum STL-CBP-4 Model Added April 2024 SPECTRUM STL-CBP-4 FILTER CARTRIDGES

Approval Holder:

Fileder Filter Systems Ltd.

Company Name

Fileder Filter Systems Ltd.

Address

20/20 BUSINESS PARK, MAIDSTONE, KENT

Postcode

ME16 0LS

Country

United Kingdom

Phone

01622 621940

General Email

jasmine@fileder.co.uk

View All Listings by this Company

Carbon block filter cartridge with plastic body. Maximum working pressure 8.2 bar. Cold water use.

Section:

1055 Filter Cartridges

Size:

32.94mm ØD

Marking:

Lincat, model and technical information on adhesive label on body.

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/12/2028

Model:

FC04 Filter Cartridge Model added April 2024: FH04 Filter Head

Approval Holder:

Lincat Ltd

Company Name

Lincat Ltd

Address

Whisby Road Lincoln Lincolnshire

Postcode

LN6 3QZ

Phone

+44 (0) 1522 875500

General Email

sales@lincat.co.uk

View All Listings by this Company

Range of stainless steel press-fit fittings (316L) and pipes (316L - EN 10312), the fitttings incorporate EPDM O-rings. Crimp joint is achieved by a M profile crimp jaws. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312316

Size:

see models

Marking:

Fittings - CHNCON & Size on body. Pipe – CHNCON & Size.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

SM01 EQUAL COUPLING: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM02 SLIP COUPLING: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM03 REDUCER MF: 18-15mm, 22-15mm, 22-18mm, 28-15mm, 28-18mm, 28-22mm, 35-18mm, 35-22mm, 35-28mm, 42-22mm, 42-28mm, 42-35mm, 54-22mm, 54-28mm, 54-35mm, 54-42mm, 76.1-42mm, 76.1-54mm, 88.9-54mm, 88.9-76.1mm, 108-76.1mm, 108-88.9mm. SM04 90° ELBOW FF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM05 90°ELBOW MF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM06 45° ELBOW FF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM07 45° ELBOW MF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SS01 90° ELBOW WITH PLANE ENDS: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SS02 SHORT PIPE BRIDGE: 15mm, 18mm, 22mm, 28mm. SS03 LONG PIPE BRIDGE: 15mm, 18mm, 22mm, 28mm. SM08 EQUAL TEE: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM09 REDUCING TEE: 18-15-18mm, 22-15-22mm, 22-18-22mm, 28-15-28mm, 28-18-28mm, 28-22-28mm, 35-15-35mm, 35-18-35mm, 35-22-35mm, 35-28-35mm, 42-15-42mm, 42-18-42mm, 42-22-42mm, 42-28-42mm, 42-35-42mm, 54-15-54mm, 54-18-54mm, 54-22-54mm, 54-28-54mm, 54-35-54mm, 54-42-54mm, 76.1-22-76.1mm, 76.1-28-76.1mm, 76.1-35-76.1mm, 76.1-42-76.1mm, 76.1-54-76.1mm, 88.9-22-88.9mm, 88.9-28-88.9mm, 88.9-35-88.9mm, 88.9-42-88.9mm, 88.9-54-88.9mm, 88.9-76.1-88.9mm, 108-22-108mm, 108-28-108mm, 108-35-108mm, 108-42-108mm, 108-54-108mm, 108-76.1-108mm, 108-88.9-108mm. SM10 TEE WITH MALE THREAD END: 15-R 1/2''-15mm, 18-R 1/2''-18mm, 22-R 3/4''-22mm, 28-R 1''-28mm, 35-R 1 1/4''-35mm. SM11 TEE WITH FEMALE THREAD END: 15-Rp 1/2''-15mm, 18-Rp 1/2''-18mm, 18-Rp 3/4''-18mm, 22-Rp 1/2''-22mm, 22-Rp 3/4''-22mm, 28-Rp 1/2''-28mm, 28-Rp 3/4''-28mm, 28-Rp 1''-28mm, 35-Rp 1/2''-35mm, 35-Rp 3/4''-35mm, 35-Rp 1''-35mm, 35-Rp 1 1/4''-35mm, 42-Rp 1/2''-42mm, 42-Rp 3/4''-42mm, 42-Rp 1''-42mm, 42-Rp 1 1/2''-42mm, 54-Rp 1/2''-54mm, 54-Rp 3/4''-54mm, 54-Rp 1''-54mm, 54-Rp 2''-54mm, 76.1-Rp 3/4''-76.1mm, 76.1-Rp 2''-76.1mm, 88.9-Rp 3/4''-88.9mm, 88.9-Rp 2''- 88.9mm, 108-Rp 3/4''-108mm, 108-Rp 2''-108mm. SM12 90° FEMALE ELBOW: 15mm-Rp 1/2'', 18mm-Rp 1/2'', 22mm-Rp 3/4'' , 28mm-Rp 1''. SM13 90° ELBOW WITH MALE THREAD END: 15mm-R 1/2'', 18mm-R 1/2'', 22mm-R 3/4'' , 28mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 2''. SM14 90°ELBOW WITH FEMALE THREAD END: 15mm-R 1/2'', 18mm-R 1/2'', 22mm-R 3/4'' , 28mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 2''. SM15 FEMALE ELBOW WITH WALL PLATE: NW-15mm-Rp 1/2'', NW-18mm-Rp 1/2'', NW-22mm-Rp 1/2''. SM16 MALE ADAPTOR: 15mm-R 1/2'', 18mm-R 1/2'', 18mm-R 3/4'', 22mm-R 1/2'', 22mm-R 3/4'', 22mm-R 1'', 28mm-R 3/4'', 28mm-R 1'', 35mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 1 1/2'', 54mm-R 2'', SM17 FEMALE ADAPTOR: 15mm-Rp 1/2'', 15mm-Rp 3/4'', 18mm-Rp 1/2'', 18mm-Rp 3/4'', 22mm-Rp 1/2'', 22mm-Rp 3/4'', 22mm-Rp 1'', 28mm-Rp 3/4'', 28mm-Rp 1'', 35mm-Rp 1'', 35mm-Rp 1 1/4'', 42mm-Rp 1 1/4'', 42mm-Rp 1 1/2'', 54mm-Rp 1 1/2'', 54mm-Rp 2''. SS04 MALE CONNECTOR: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SS05 FEMALE CONNECTOR: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM18 ADAPTOR WITH UNION NUT: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 22mm- 1'', 28mm- 1'', 28mm- 1 1/4'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM19 ADAPTOR UNION WITH MALE THREAD: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM20 ADAPTOR UNION WITH FEMALE THREAD: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM21 CAP: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM22 FLANGE WITH PRESS-JOINT: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SP 1620 Stainless Steel Pipe - Φ x TH: 15mm x 1, 18mm x 1, 22mm x 1.2, 28mm x 1.2, 35mm x 1.5, 42mm x 1.5, 54mm x 1.5, 76.1mm x 2, 88.9mm x 2, 108mm x 2.

Approval Holder:

ZHEJIANG ZHENGKANG INDUSTRIAL CO.,LTD.

Company Name

ZHEJIANG ZHENGKANG INDUSTRIAL CO.,LTD.

Address

: NO.678 Dingxiang Road, Binhai Garden, Economic and Technological Development Zone, Wenzhou

Country

China

View All Listings by this Company

Range of stainless steel press-fit fittings (316L or 304) and pipes (SUS316L or SUS304 - EN 10312), the fitttings incorporate EPDM O-rings. Crimp joint is achieved by a M profile crimp jaws. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312317

Size:

see models

Marking:

Fittings - PIPRESS, size and stainless steel grade (SUS316L or SUS304). Pipe - PIPRESS, size and stainless steel grade (SUS316L or SUS304).

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Stainless Steel Press Connector: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Adjustable Connector: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Reducing connector: 18x15mm, 22x15mm, 22x18mm, 28x15mm, 28x18mm, 28x22mm, 35x15mm, 35x18mm, 35x22mm, 35x28mm, 42x15mm, 42x18mm, 42x22mm, 42x28mm, 42x35mm, 54x15mm, 54x18mm, 54x22mm, 54x28mm, 54x35mm, 54x42mm, 76.1x54mm, 88.9x54mm, 88.9x76.1mm, 108x54mm, 108x76.1mm, 108x88.9mm. Stainless Steel Press B-type reducing connector: 18x15mm, 22x15mm, 22x18mm, 28x15mm, 28x18mm, 28x22mm, 35x15mm, 35x18mm, 35x22mm, 35x28mm, 42x15mm, 42x18mm, 42x22mm, 42x28mm, 42x35mm, 54x15mm, 54x18mm, 54x22mm, 54x28mm, 54x35mm, 54x42mm, 76.1x54mm, 88.9x54mm, 88.9x76.1mm, 108x54mm, 108x76.1mm, 108x88.9mm. Stainless Steel Press A-type 90°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press B-type 90°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press A-type 45°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press B-type 45°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press End cap: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Equal tee: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Reducing Tee: 18×15mm, 22×15mm, 22×18mm, 28×15mm, 28×18mm, 28×22mm, 35×15mm, 35×18mm, 35×22mm, 35×28mm, 42×15mm, 42×18mm, 42×22mm, 42×28mm, 42×35mm, 54×15mm, 54×18mm, 54×22mm, 54×28mm, 54×35mm, 54×42mm, 76.1×22mm, 76.1×28mm, 76.1×35mm, 76.1×42mm, 76.1×54mm, 88.9×22mm, 88.9×28mm, 88.9×35mm, 88.9×42mm, 88.9×54mm, 88.9×76.1mm, 108×22mm, 108×28mm, 108×35mm, 108×42mm, 108×54mm, 108×76.1mm, 108×88.9mm. Stainless Steel Pipe Bridge: 15mm, 18mm, 22mm, 28mm. Stainless Steel Press Female adapter: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×3/4'', 28mm×1'', 35mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/4'', 42mm×1-1/2'', 54mm×1-1/2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Female Swivel adapter: 15mm×1/2'', 15mm×3/4'', 18mm×1/2'', 18mm×3/4'', 22mm×3/4'', 22mm×1‘’, 28mm×1'', 28mm×1-1/4'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/2'', 42mm×2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Male threaded adapter: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×3/4'', 28mm×1'', 35mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/4'', 42mm×1-1/2'', 54mm×1-1/2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Female threaded 90°elbow: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4'', 42mm×1-1/2'', 54mm×2''. Stainless Steel Press Female threaded 90°elbow with bracket: 15mm×1/2'', 18mm×1/2'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4''. Stainless Steel Press Female Short 90°elbow: 15mm×1/2'', 18mm×1/2'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4''. Stainless Steel Press Male threaded 90°elbow: 15mm× 1/2'', 18mm× 1/2'', 22mm× 1/2'', 22mm× 3/4'', 28mm× 1'', 35mm× 1-1/4'', 42mm× 1-1/2'', 54mm× 1-1/2'', 54mm× 2''. Stainless Steel Press Female Threaded Tee: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1/2'', 28mm×3/4'', 28mm×1'', 35mm×1/2'', 35mm×3/4'', 35mm×1'', 35mm×1-1/4'', 42mm×1/2'', 42mm×3/4'', 42mm×1-1/2'', 54mm×1/2'', 54mm×3/4'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. Stainless Steel Press Male Threaded Tee: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1/2'', 28mm×3/4'', 28mm×1'', 35mm×3/4'', 35mm×1-1/4'', 42mm×3/4'', 42mm×1-1/2'', 54mm×3/4'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. Stainless Steel Press Flange: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press 3Pcs Union Male swivel adapter: 15mm×1/2'', 15mm×3/4'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 22mm×1'', 28mm×3/4'', 28mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/2'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. PIPRESS-Stainless Steel Pipe: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm.

Approval Holder:

ZHEJIANG QILU TECHNOLOGY CO., LTD.

Company Name

ZHEJIANG QILU TECHNOLOGY CO., LTD.

Address

BUILDING24, No.1399 LIANGMU ROAD, HANGZHOU

Country

China

View All Listings by this Company

Geberit range of ‘FlowFit’ press Fittings for use with ‘Geberit FlowFit Pipe ML’ and ‘Geberit FlowFit Pipe coils ML’ (insulated and uninsulated) PERT/Al/PERT pipes. The fittings are made from PPSU or lead free silicon bronze. Operating parameters: 16.0 bar@cold water and 10.0 bar@70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312363

Size:

16mm – 75mm.

Marking:

Geberit & size on fittings. Geberit, size, model & material on pipes.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Geberit FlowFit Fittings for use with Geberit FlowFit Pipe ML and Geberit FlowFit Pipe coils ML (insulated and uninsulated) Fittings included on the approval: FlowFit coupling 620.010.00.1 PPSU, d=16mm 620.011.00.1 PPSU, d=20mm 620.012.00.1 PPSU, d=25mm 620.013.00.1 PPSU, d=32mm 620.014.00.1 PPSU, d=40mm 620.015.00.1 PPSU, d=50mm 620.016.00.1 PPSU, d=63mm 620.017.00.1 PPSU, d=75mm FlowFit long coupling 620.020.00.1 CuZn21Si3P, d=16mm 620.021.00.1 CuZn21Si3P, d=20mm 620.022.00.1 CuZn21Si3P, d=25mm 620.023.00.1 CuZn21Si3P, d=32mm 620.024.00.1 CuZn21Si3P, d=40mm 620.025.00.1 CuZn21Si3P, d=50mm FlowFit reducer 620.031.00.1 PPSU, d=20mm, d1=16mm 620.032.00.1 PPSU, d=25mm, d1=16mm 620.042.00.1 PPSU, d=25mm, d1=20mm 620.033.00.1 PPSU, d=32mm, d1=20mm 620.043.00.1 PPSU, d=32mm, d1=25mm 620.034.00.1 PPSU, d=40mm, d1=20mm 620.044.00.1 PPSU, d=40mm, d1=25mm 620.054.00.1 PPSU, d=40mm, d1=32mm 620.035.00.1 PPSU, d=50mm, d1=32mm 620.045.00.1 PPSU, d=50mm, d1=40mm 620.036.00.1 PPSU, d=63mm, d1=40mm 620.046.00.1 PPSU, d=63mm, d1=50mm 620.037.00.1 PPSU, d=75mm, d1=40mm 620.047.00.1 PPSU, d=75mm, d1=50mm 620.057.00.1 PPSU, d=75mm, d1=63mm FlowFit bend 620.062.00.1 45°, PPSU, d=25mm 620.063.00.1 45°, PPSU, d=32mm 620.064.00.1 45°, PPSU, d=40mm 620.065.00.1 45°, PPSU, d=50mm 620.066.00.1 45°, PPSU, d=63mm 620.067.00.1 45°, PPSU, d=75mm 620.070.00.1 90°, PPSU, d=16mm 620.071.00.1 90°, PPSU, d=20mm 620.072.00.1 90°, PPSU, d=25mm 620.073.00.1 90°, PPSU, d=32mm 620.074.00.1 90°, PPSU, d=40mm 620.075.00.1 90°, PPSU, d=50mm 620.076.00.1 90°, PPSU, d=63mm 620.077.00.1 90°, PPSU, d=75mm FlowFit T-piece, equal 620.080.00.1 PPSU, d=16mm 620.081.00.1 PPSU, d=20mm 620.082.00.1 PPSU, d=25mm 620.083.00.1 PPSU, d=32mm 620.084.00.1 PPSU, d=40mm 620.085.00.1 PPSU, d=50mm 620.086.00.1 PPSU, d=63mm 620.087.00.1 PPSU, d=75mm FlowFit T-piece, reduced 620.111.00.1 PPSU, d=20mm, d1=16mm, d2=20mm 620.101.00.1 PPSU, d=20mm, d1=16mm, d2=16mm 620.121.00.1 PPSU, d=16mm, d1=20mm, d2=16mm 620.102.00.1 PPSU, d=25mm, d1=20mm, d2=20mm 620.131.00.1 PPSU, d=20mm, d1=20mm, d2=16mm 620.103.00.1 PPSU, d=32mm, d1=25mm, d2=25mm 620.104.00.1 PPSU, d=40mm, d1=20mm, d2=40mm 620.105.00.1 PPSU, d=50mm, d1=40mm, d2=40mm 620.106.00.1 PPSU, d=63mm, d1=25mm, d2=63mm 620.107.00.1 PPSU, d=75mm, d1=25mm, d2=75mm 620.112.00.1 PPSU, d=25mm, d1=16mm, d2=25mm 620.113.00.1 PPSU, d=32mm, d1=16mm, d2=32mm 620.114.00.1 PPSU, d=40mm, d1=25mm, d2=40mm 620.115.00.1 PPSU, d=50mm, d1=25mm, d2=50mm 620.116.00.1 PPSU, d=63mm, d1=32mm, d2=63mm 620.117.00.1 PPSU, d=75mm, d1=32mm, d2=75mm 620.122.00.1 PPSU, d=25mm, d1=20mm, d2=25mm 620.123.00.1 PPSU, d=32mm, d1=20mm, d2=25mm 620.124.00.1 PPSU, d=40mm, d1=32mm, d2=40mm 620.125.00.1 PPSU, d=50mm, d1=32mm, d2=50mm 620.126.00.1 PPSU, d=63mm, d1=40mm, d2=63mm 620.127.00.1 PPSU, d=75mm, d1=40mm, d2=75mm 620.132.00.1 PPSU, d=20mm, d1=25mm, d2=20mm 620.133.00.1 PPSU, d=32mm, d1=20mm, d2=32mm 620.135.00.1 PPSU, d=50mm, d1=40mm, d2=50mm 620.136.00.1 PPSU, d=63mm, d1=50mm, d2=63mm 620.137.00.1 PPSU, d=75mm, d1=50mm, d2=75mm 620.142.00.1 PPSU, d=25mm, d1=25mm, d2=20mm 620.143.00.1 PPSU, d=32mm, d1=25mm, d2=32mm 620.147.00.1 PPSU, d=75mm, d1=63mm, d2=75mm FlowFit T-piece with female thread 620.150.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm 620.151.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm 620.157.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm 620.152.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm 620.162.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", d1=25mm 620.153.00.1 CuSn4Zn2PS, d=32mm, Rp=1/2", d1=32mm 620.163.00.1 CuSn4Zn2PS, d=32mm, Rp=3/4", d1=32mm 620.173.00.1 CuSn4Zn2PS, d=32mm, Rp=1", d1=32mm 620.154.00.1 CuSn4Zn2PS, d=40mm, Rp=1/2", d1=40mm 620.164.00.1 CuSn4Zn2PS, d=40mm, Rp=3/4", d1=40mm 620.174.00.1 CuSn4Zn2PS, d=40mm, Rp=1", d1=40mm 620.184.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4", d1=40mm 620.155.00.1 CuSn4Zn2PS, d=50mm, Rp=1/2", d1=50mm 620.165.00.1 CuSn4Zn2PS, d=50mm, Rp=3/4", d1=50mm 620.175.00.1 CuSn4Zn2PS, d=50mm, Rp=1", d1=50mm 620.185.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2", d1=50mm 620.156.00.1 CuSn4Zn2PS, d=63mm, Rp=1/2", d1=63mm 620.166.00.1 CuSn4Zn2PS, d=63mm, Rp=1", d1=63mm 620.176.00.1 CuSn4Zn2PS, d=63mm, Rp=2", d1=63mm 620.177.00.1 CuSn4Zn2PS, d=75mm, Rp=1", d1=75mm FlowFit adapter to Geberit Mepla: 620.090.00.1 CuZn21Si3P, d=16mm, d1=16mm 620.091.00.1 CuZn21Si3P, d=20mm, d1=20mm 620.092.00.1 CuZn21Si3P, d=25mm, d1=26mm 620.093.00.1 CuZn21Si3P, d=32mm, d1=32mm 620.094.00.1 CuZn21Si3P, d=40mm, d1=40mm 620.095.00.1 CuZn21Si3P, d=50mm, d1=50mm 620.096.00.1 CuZn21Si3P, d=63mm, d1=63mm 620.097.00.1 CuZn21Si3P, d=75mm, d1=75mm FlowFit adapter to Geberit Mapress, with plain end 620.230.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.240.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.231.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.241.00.1 CuSn4Zn2PS, d=20mm, d1=18mm 620.242.00.1 CuSn4Zn2PS, d=20mm, d1=22mm 620.232.00.1 CuSn4Zn2PS, d=25mm, d1=22mm 620.233.00.1 CuSn4Zn2PS, d=32mm, d1=28mm 620.234.00.1 CuSn4Zn2PS, d=40mm, d1=35mm 620.235.00.1 CuSn4Zn2PS, d=50mm, d1=42mm 620.236.00.1 CuSn4Zn2PS, d=63mm, d1=54mm 620.250.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.251.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.252.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.253.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.254.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.255.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.256.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.257.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter to Geberit Mapress, with pressing socket 620.329.00.1 X5CrNiMo17-12-2, d=16mm, d1=12mm 620.332.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.347.00.1 X5CrNiMo17-12-2, d=20mm, d1=15mm 620.333.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.334.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.335.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.336.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.337.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.338.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.339.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter with male thread 620.300.00.1 CuZn21Si3P, d=16mm, R=3/8" 620.301.00.1 CuZn21Si3P, d=20mm, R=3/8" 620.302.00.1 CuZn21Si3P, d=25mm, R=1/2" 620.303.00.1 CuZn21Si3P, d=32mm, R=1" 620.304.00.1 CuZn21Si3P, d=40mm, R=1" 620.305.00.1 CuZn21Si3P, d=50mm, R=1 1/2" 620.306.00.1 CuZn21Si3P, d=63mm, R=2" 620.307.00.1 CuZn21Si3P, d=75mm, R=2 1/2" 620.310.00.1 CuZn21Si3P, d=16mm, R=1/2" 620.311.00.1 CuZn21Si3P, d=20mm, R=1/2" 620.312.00.1 CuZn21Si3P, d=25mm, R=3/4" 620.313.00.1 CuZn21Si3P, d=32mm, R=1 1/4" 620.314.00.1 CuZn21Si3P, d=40mm, R=1 1/4" 620.315.00.1 CuZn21Si3P, d=50mm, R=2" 620.316.00.1 CuZn21Si3P, d=63mm, R=2 1/2" 620.320.00.1 CuZn21Si3P, d=16mm, R=3/4" 620.321.00.1 CuZn21Si3P, d=20mm, R=3/4" 620.322.00.1 CuZn21Si3P, d=25mm, R=1" 620.324.00.1 CuZn21Si3P, d=40mm, R=1 1/2" 619.700.00.1 X5CrNiMo17-12-2, d=20mm, R=1/2" 619.701.00.1 X5CrNiMo17-12-2, d=25mm, R=3/4" 619.702.00.1 X5CrNiMo17-12-2, d=32mm, R=1" 619.703.00.1 X5CrNiMo17-12-2, d=40mm, R=1 1/4" 619.704.00.1 X5CrNiMo17-12-2, d=50mm, R=1 1/2" 619.705.00.1 X5CrNiMo17-12-2, d=63mm, R=2" 619.706.00.1 X5CrNiMo17-12-4, d=75mm, R=2 1/2" FlowFit adapter with female thread: 620.400.00.1 CuZn21Si3P, d=16mm, Rp=3/8" 620.410.00.1 CuZn21Si3P, d=16mm, Rp=1/2" 620.420.00.1 CuZn21Si3P, d=16mm, Rp=3/4" 620.401.00.1 CuZn21Si3P, d=20mm, Rp=3/8" 620.411.00.1 CuZn21Si3P, d=20mm, Rp=1/2" 620.421.00.1 CuZn21Si3P, d=20mm, Rp=3/4" 620.402.00.1 CuZn21Si3P, d=25mm, Rp=3/4" 620.412.00.1 CuZn21Si3P, d=25mm, Rp=1" 620.403.00.1 CuZn21Si3P, d=32mm, Rp=1" 620.413.00.1 CuZn21Si3P, d=32mm, Rp=1 1/4" 620.404.00.1 CuZn21Si3P, d=40mm, Rp=1" 620.414.00.1 CuZn21Si3P, d=40mm, Rp=1 1/4" 620.424.00.1 CuZn21Si3P, d=40mm, Rp=1 1/2" 620.405.00.1 CuZn21Si3P, d=50mm, Rp=1 1/2" 620.415.00.1 CuZn21Si3P, d=50mm, Rp=2" 620.406.00.1 CuZn21Si3P, d=63mm, Rp=2" 620.416.00.1 CuZn21Si3P, d=63mm, Rp=2 1/2" 620.407.00.1 CuZn21Si3P, d=75mm, Rp=2 1/2" FlowFit bend adapter 90° with male thread 620.510.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.520.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.511.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.521.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.502.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.512.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.503.00.1 CuSn4Zn2PS, d=32mm, R=1" 620.504.00.1 CuSn4Zn2PS, d=40mm, R=1 1/4" 620.505.00.1 CuSn4Zn2PS, d=50mm, R=1 1/2" 620.506.00.1 CuSn4Zn2PS, d=63mm, R=2" FlowFit 90° bend adapter with male thread, long: 620.522.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.523.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.524.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.525.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.526.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.527.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.528.00.1 CuSn4Zn2PS, d=32mm, R=1" FlowFit bend adapter 90° with female thread 620.532.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4" 620.533.00.1 CuSn4Zn2PS, d=32mm, Rp=1" 620.534.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4" 620.535.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2" 620.536.00.1 CuSn4Zn2PS, d=63mm, Rp=2" 620.540.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.541.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" 620.542.00.1 CuSn4Zn2PS, d=25mm, Rp=1" 620.550.00.1 CuSn4Zn2PS, d=16mm, Rp=3/4" 620.551.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4" FlowFit adapter with MasterFix 620.290.00.1 PPSU, d=16mm, RpMF=1/2" 620.291.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit elbow adapter 90° with MasterFix: 620.490.00.1 PPSU, d=16mm, RpMF=1/2" 620.491.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit T-piece adapter with MasterFix, through-flow 620.380.00.1 PPSU, d=16mm, RpMF=1/2", d1=16mm 620.381.00.1 PPSU, d=20mm, RpMF=1/2", d1=16mm 620.391.00.1 PPSU, d=20mm, RpMF=1/2", d1=20mm 620.382.00.1 PPSU, d=25mm, RpMF=1/2", d1=20mm 620.392.00.1 PPSU, d=25mm, RpMF=1/2", d1=25mm 620.780.00.1 PPSU, d=16mm, d1=16mm, RpMF1=1/2" 620.781.00.1 PPSU, d=20mm, d1=20mm, RpMF1=1/2" FlowFit adapter to Compact 620.560.00.1 CuZn21Si3P, d=16mm, di=21mm 620.561.00.1 CuZn21Si3P, d=20mm, di=21mm 620.562.00.1 CuZn21Si3P, d=25mm, di=21mm FlowFit screw connection 620.570.00.1 CuZn21Si3P, d=16mm 620.571.00.1 CuZn21Si3P, d=20mm 620.572.00.1 CuZn21Si3P, d=25mm 620.573.00.1 CuZn21Si3P, d=32mm 620.574.00.1 CuZn21Si3P, d=40mm 620.575.00.1 CuZn21Si3P, d=50mm 620.576.00.1 CuZn21Si3P, d=63mm FlowFit adapter union with clamping ring 620.680.00.1 CuZn21Si3P, d=16mm, d1=12mm 620.690.00.1 CuZn21Si3P, d=16mm, d1=15mm 620.681.00.1 CuZn21Si3P, d=20mm, d1=15mm FlowFit elbow adapter 90° with clamping ring union 620.700.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.710.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.701.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.720.00.1 CuZn21Si3P / Cu, d=16mm, d1=15mm 620.721.00.1 CuZn21Si3P / Cu, d=20mm, d1=15mm 620.722.00.1 CuZn21Si3P / Cu, d=25mm, d1=22mm FlowFit adapter with screw connection to PEX pipes: 620.730.00.1 CuZn21Si3P, d=16mm, d1=16mm, PN=6bar 620.731.00.1 CuZn21Si3P, d=20mm, d1=20mm, PN=6bar 620.732.00.1 CuZn21Si3P, d=25mm, d1=25mm, PN=6bar FlowFit pipe end plug 620.740.00.1 CuZn21Si3P, d=16mm 620.741.00.1 CuZn21Si3P, d=20mm 620.742.00.1 CuZn21Si3P, d=25mm FlowFit tap connector box 90° with MasterFix 650.681.00.3 CC499K, d=16mm, Rp=1/2" 651.681.00.3 CC499K, d=20mm, Rp=1/2" 652.682.00.3 CC499K, d=20mm, Rp=3/4" Tap connector box 90° for MasterFix 650.687.00.3 CC499K, Rp=1/2" 650.688.00.3 CC499K, Rp=3/4" FlowFit double tap connector box 90° with MasterFix 650.683.00.3 CC499K, d=16mm, Rp=1/2", d1=16mm 652.685.00.3 CC499K, d=20mm, Rp=1/2", d1=16mm Double tap connector box 90° for MasterFix 650.689.00.3 CC499K, Rp=1/2" FlowFit tap connector box 90° with MasterFix, premounted 650.791.00.3 CC499K, d=16mm, Rp=1/2", AD=15.3cm 651.791.00.3 CC499K, d=20mm, Rp=1/2", AD=15.3cm 650.792.00.3 CC499K, Rp=1/2", RMF=1/2", AD=15.3cm FlowFit connection bend 90° 620.802.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", L=5.2cm 620.750.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=3.6cm 620.751.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=3.6cm 620.760.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=3.6cm 620.761.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.810.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=5.2cm 620.811.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm 620.821.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4", L=5.2cm 620.770.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=7.8cm 620.771.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=7.8cm 620.800.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=5.2cm 620.801.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=5.2cm FlowFit T-elbow tap connector 90°, offset 620.951.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=3.6cm 620.981.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm FlowFit double elbow tap connector 90°: 620.830.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm, L=5.2cm 620.831.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=20mm, L=5.2cm 620.832.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=25mm, L=5.2cm 620.841.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=16mm, L=5.2cm 620.842.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm, L=5.2cm 620.851.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm 620.852.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm, L=5.2cm FlowFit corner elbow connector 90° 620.881.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.921.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm FlowFit set of connection bend 90°, double 619.620.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=4.7cm, AD=15cm 619.621.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15cm FlowFit connection bend 90°, premounted 619.630.00.1 single: CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm 619.631.00.1 single: CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm FlowFit elbow tap connector 90°, premounted, double 619.640.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.651.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.641.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=10cm FlowFit PushFit tap connector box 90° pre-mounted, double 619.661.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.671.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=7.8cm, AD=15.3cm FlowFit connection bend 90°, premounted, double, with drain pipe bracket and connection bend 619.681.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.690.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=3.6cm, AD=15.3cm FlowFit elbow tap connector 90° for concealed cistern: 620.790.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.791.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit Mepla elbow tap connector 90° for concealed cistern 620.890.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.891.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit FloiwFit connector T-piece for concealed cistern 620.990.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.991.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" Manifold with threaded connection and connection nipple for manifold, for MasterFix 653.428.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 2 outlets 653.429.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 3 outlets Offset bend with male thread 653.478.00.1 CC499K, R=3/4" Cap with MasterFix 653.420.00.1 CW617N, RpMF=1/2" FlowFit connection nipple for manifold, for Euro cone 620.330.00.1 CuZn21Si3P, d=16mm, G=3/4" 620.331.00.1 CuZn21Si3P, d=20mm, G=3/4"

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Manufacturer:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Instantor range of brass compression fittings for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312342

Size:

8mm, 10mm, 12mm, 15mm, 22mm & 28mm

Marking:

Instantor, size & EN1254-2 on nut. ‘S’ cast on body of tee piece.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Instantor range comprising of models: Straight Coupler 410077 8mm C x C 410088 10mm C x C 410099 12mm C x C 410001 15mm C x C 410002 22mm C x C 410003 28mm C x C Straight Coupler Adaptor 410087 10 x 8mm C x C 410017 15 x 8mm C x C 410098 12 x 10mm C x C 410018 15 x 10mm C x C 410019 15 12mm C x C 410021 22 x 15mm C x C 410022 22mm x 3/4" C x C 410032 28 x 22mm C x C Straight Coupler 411077 8mm x 1/4" C x M.I 411079 8mm x 3/8" C x M.I 411071 8mm x 1/2" C x M.I 411087 10mm x 1/4" C x M.I 411089 10mm x 3/8" C x M.I 411081 10mm x 1/2" C x M.I Straight Coupler 411019 15mm x 3/8" C x M.I 411001 15mm x 1/2" C x M.I 411012 15mm x 3/4" C x M.I 411021 22mm x 1/2" C x M.I 411002 22mm x 3/4" C x M.I 411023 22mm x 1" C x M.I 411032 28mm x 3/4" C x M.I 411003 28mm x 1" C x M.I Straight Coupler 412079 8mm x 3/8" C x F.I. 412087 10mm 1/4" C x F.I. 412081 10mm x 1/2" C x F.I. 412089 10mm x 3/8" C x F.I. 412091 12mm x 1/2" C x F.I. 412019 15mm x 3/8" C x F.I. 412001 15mm x 1/2" C x F.I. 412012 15mm x 3/4" C x F.I. 412021 22mm x 1/2" C x F.I. 412002 22mm x 3/4" C x F.I. 412023 22mm x 1" C x F.I. 412032 28mm x 3/4" C x F.I. 412003 28mm x 1" C x F.I. Elbow 415077 8mm C x C 415088 10mm C x C 415001 15mm C x C 415002 22mm C x C 415003 28mm C x C 415021 22mm x 15mm C x C Elbow 416087 10mm x 1/4" C x M.I. 416089 10mm x 3/8" C x M.I. 416081 10mm x 1/2" C x M.I. 416001 15mm x 1/2" C x M.I. 416012 15mm x 3/4" C x M.I. 416021 22mm x 1/2" C x M.I. 416002 22mmx 3/4" C x M.I. 416023 22mm x 1" C x M.I. 416032 28mm x 3/4" C x M.I. 416003 28mm x 1" C x M.I. Elbow 417001 15mm x 1/2" C x F.I. 417021 22mm x 1/2" C x F.I. 417002 22mm x 3/4" C x F.I. 417023 22mm x 1" C x F.I. 417003 28mm x 1" C x F.I. 417012 3/4" x 15mm F.I. x C Equal Tee's 418777 8mm C x C x C 418888 10mm C x C x C 418001 15mm C x C x C 418002 22mm C x C x C 418003 28mm C x C x C Reducing Tee's 418211 22 x 15 x 15mm C x C x C 418212 22 x 15 x 22mm C x C x C 418221 22 x 22 x 15mm C x C x C 418313 28 x 15 x28mm C x C x C 418331 28 x 28 x 15mm C x C x C 418322 28 x 22 x 22mm C x C x C 418323 28 x 22 x 28mm C x C x C 418332 28 x 28 x 22mm C x C x C Wallplate Elbow 419001 15mm x 1/2" C x F.I. 421001 15mm x 1/2" C x F.I. HD 421002 22mm x 3/4" C x F.I. HD 430001 15mm x 15mm x 1/2" 430 Tee C x C x F.I 430002 22mm x 22mm x 3/4" 430 Tee C x C x F.I Stop End Compression 451007 8mm 451008 10mm 451001 15mm 451002 22mm 451003 28mm Compression Nut 478008 10mm 478A 478009 12mm 478A 478001 15mm 478A 478002 22mm 478A 478003 28mm 478A Compression Ring 479007 8mm 478B 479008 10mm 478B 479001 15mm 478B 479002 22mm 478B 479003 28mm 478B

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company

Range of blue epoxy coated ductile iron flanged dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2312082

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1100, DN1200, DN1400, DN1500, DN1600 & DN1800 Flanged

Marking:

Davinci on dataplate on body. SIZE, DN & EN545 casted on the body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

330

Approval Holder:

DAVINCI VALVES

Company Name

DAVINCI VALVES

Address

Room 3109 Unit 1 Building 2 No. 68 Zhiquan Section Dongda Street Jinjiang District CHENGDU

Postcode

610065

Country

China

Phone

+34616553797

General Email

alex@davincivalves.com

View All Listings by this Company

WC dual flush drop valve with plastic body silicone and rubber seal. The valve is operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold Water Use Only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2104081

Size:

2" BSP (M)

Marking:

UK Bathrooms on top of valve body.

Installation Requirements:

R001 R571

Expiry date:

30/04/2026

Model:

UKB210

Approval Holder:

UK Bathrooms Ltd

Company Name

UK Bathrooms Ltd

Address

Aston House Redburn Road Newcastle Upon Tyne

Postcode

NE5 1NB

View All Listings by this Company

Range of packaged plate heat exchangers comprising of stainless steel plates with EPDM gaskets. The products are supplied with twin primary circulation pumps, a secondary circulation pump, 3 port control valve and a control panel with full Mod BUS BMS connectivity. Maximum working pressure - Primary and Secondary circuits 10.0 bar. Maximum operating temperature 85°C.

Section:

1350 Heat Exchangers

Size:

25, 30, 35 and 38 Series: Primary circuit: 1¼” BSP (F) inlet x 1¼” BSP (M) outlet. Secondary circuit: 1¼” BSP (M) inlet x 1¼” BSP (F) outlet. 40 Series: Primary circuit: 1½” BSP (F) inlet x 1½” BSP (M) outlet. Secondary circuit: 1½” BSP (F) inlet x 1½” BSP (F) outlet. 50 Series: Primary circuit: 2” BSP (M) inlet/outlet. Secondary circuit: 2” BSP (F) inlet/outlet.

Marking:

CHWS logo on front of control unit. CHWS logo serial number and model number on label on back plate.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Propak Thermal range: 25 Series: 2507, 2509, 2511, 2513, 2515. 30 Series: 3013, 3017, 3019, 3021, 3023, 3025, 3029, 3033, 3039, 3045. 35 Series: 3531, 3535, 3539, 3543. 38 Series: 3811, 3821, 3829, 3835, 3843, 3851, 3859, 3867, 3875. 40 Series: 4015, 4017, 4019, 4021, 4029, 4035, 4041. 50 Series: 5021, 5025, 5031, 5035, 5039, 5043, 5049.

Approval Holder:

Commercial Hot Water Solutions Ltd.

Company Name

Commercial Hot Water Solutions Ltd.

Address

THe Hive, Beaufighter Road, Weston-Super-Mare

Postcode

BS24 8EE

View All Listings by this Company

Range of water meter manifolds with plastic bodies which incorporates a (spherical) stop valve. The MB40408256BM, MB40408254NM, MB40408326BM, MB40408324BM, MB40425256BM MB40425254BM, MB40432326BM and MB40432324BM models incorporate a non-return valve. The MB40408255DCVBM and MB40408254DCVBM models incorporate two non-return valves. The product is supplied with pipe liners for use with the pushfit connections. The pushfit connections are for use with PE80 pipes (manufactured to BS EN 12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

MB40425254BM & MB40425256BM: 25mm pushfit. MB40432324BM & MB40432326BM: 32mm pushfit. All other models: 2” BSP (F).

Marking:

Atlantic Plastics logo on body. Talbot and size marked on pushfit connections.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

MB40408256BM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (25mm Willow type 2 Bend), MB40408254NM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (25mm Willow type 2 Bend), MB40408326BM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (32mm Solid type 1 Bend), MB40408324BM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (32mm Solid type 1 Bend), MB40408255DCVBM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (25mm Willow type 2 Bend), MB40408254DCVBM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (25mm Willow type 2 Bend), MB40425256BM: Multi Manifold 6 Port - 6 Inlet x 6 Outlet (25mm Willow type 2 Bend), MB40425254BM: Multi Manifold 4 Port - 4 Inlet x 4 Outlet (25mm Willow type 2 Bend), MB40432326BM: Multi Manifold 6 Port - 6 Inlet x 6 Outlet (32mm Solid type 1 Bend), MB40432324BM: Multi Manifold 4 Port - 4 Inlet x 4 Outlet (32mm Solid type 1 Bend).

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of water meter manifolds with plastic (MBB1100 prefix models) or gunmetal (MBB2010 prefix models) manifolds. The inlet to the manifold incorporates a quarter turn spherical valve. The products also incorporate a non-return valve. Maximum working pressure 12.5 bar. Cold water use only

Section:

1510 Water Meter Manifolds

WRAS Approval Number:

2312366

Note:

Because there are no accepted tests, WRAS approval does not include an assessment of its ability to prevent migration of contaminants through the wall from the surrounding soil.

Size:

¾” BSP (F)

Marking:

EBCO (brand of Atlantic Plastic Ltd) and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

MBB1100FCV, MBB1100FCB, MBB1100FCBK, MBB1100FCDI, MBB1100FCSTW, MBB2010B, MBB2010C, MBB2010DI.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

‘Tanktronic‘ range of water level monitoring kits comprising of a main control unit, vent box and single or double stainless steel sensors. Open outlet use only. Maximum operating temperature 23°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2312351

Note:

IRN R008 only applies to the sensors.

Size:

24.50MM OD (sensor outer diameter – product has no water connections).

Marking:

Tanktronic, Keraflow, model, serial no & production info on sensor box & vent box assembly.

Installation Requirements:

R001 R008

Expiry date:

31/12/2028

Model:

TT/41 - Tanktronic Main Control Unit with Single 3m Sensor and Vent box assembly, TT/42 - Tanktronic Main Control Unit with Single 5m Sensor and Vent box assembly, TT/43- Tanktronic Main Control Unit with Twin 3m Sensor and Vent box assembly, TT/44 - Tanktronic Main Control Unit with Twin 5m Sensor and Vent box assembly.

Approval Holder:

Cistermiser Ltd

Company Name

Cistermiser Ltd

Address

Unit 1 Woodley Park Estate, 59/69 Reading Road Woodley

Postcode

RG5 3AN

Country

United Kingdom

General Email

jake.felstead@cistermiser.co.uk

View All Listings by this Company

Manufacturer:

Cistermiser Ltd

Company Name

Cistermiser Ltd

Address

Unit 1 Woodley Park Estate, 59/69 Reading Road Woodley

Postcode

RG5 3AN

Country

United Kingdom

General Email

jake.felstead@cistermiser.co.uk

View All Listings by this Company

Range of concealed, wall mounted rough sets with DZR brass bodies. Maximum working pressure 10.0 Bar. Maximum operating temperature 75.0°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2401711

Size:

1/2" BSP (F).

Marking:

Hansgrohe (13 622 180) or AXOR (13 623 180) on body.

Installation Requirements:

R001 R010

Expiry date:

31/01/2029

Model:

13 622 180, 13 623 180.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower handsets, (plastic bodies - various finishes). Maximum operating temperature 70 °C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2312314

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Prime on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2028

Model:

DS1010WT 1 function handshower - white DS1010XX 1 function handshower HS1740XX 1 function handshower MHS1060XX 1 function handshower MHS1070XX 1 function handshower KH10601XX 1 function handshower KH10600XX 1 function handshower HS3500XX 3 function handshower HS3772XX 3 function handshower KH50600XX 5 function handshower HS4710XX 4 function handshower DS1310XX 1 function handshower MHS1500XX 1 function handshower XX=CP, BNP, MG and BG CP : Chrome BNP: Physical Vapor Deposition MG: Golden BG: Brush gun

Approval Holder:

Xiamen Prime Shower Co., Ltd.

Company Name

Xiamen Prime Shower Co., Ltd.

Address

No 105, Xiaguang Road Haicang District Xiamen

Country

China

View All Listings by this Company

Manufacturer:

Xiamen Prime Shower Co., Ltd.

Company Name

Xiamen Prime Shower Co., Ltd.

Address

No 105, Xiaguang Road Haicang District Xiamen

Country

China

View All Listings by this Company

Range of plastic shower handsets available in various finishes. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2312323

Note:

Open Outlet use only.

Size:

½” BSP (M).

Marking:

Laser marking, Almar, MADE IN ITALLY.

Installation Requirements:

R001 R040

Expiry date:

31/12/2028

Model:

E082019.XXXYYZZ, E082050.XXXYYZZ, E082070.XXXYYZZ, E082094.XXXYYZZ. Where: XXX denotes finish and can be replaced by: 002 - Chrome. 136 - White painted. 141 - Black plainted. 245 - PVD Gold. 246 - PVD Stainless steel. 277 - Nickel nrushed. 284 - PVD Copper brushed. 285 - PVD High brass brushed. 286 - PVD Gun metal brushed. YY is replaced by an alphanumeric code to denote customer. ZZ is replaced by an alphanumeric code to denote packaging information.

Approval Holder:

ALMAR s.r.l

Company Name

ALMAR s.r.l

Address

Viale dello Sport, 17 bis Gavirate (VA)

Postcode

21026

Country

Italy

General Email

info@almarmadeinitaly.it

View All Listings by this Company

Manufacturer:

ALMAR s.r.l

Company Name

ALMAR s.r.l

Address

Viale dello Sport, 17 bis Gavirate (VA)

Postcode

21026

Country

Italy

General Email

info@almarmadeinitaly.it

View All Listings by this Company

Range of colour coded disposable shower kits incorporating a white PVC shower hose with EPDM washer and shower handset incorporating a plastic body (white), NBR ‘O’-rings, and a coloured locking ring around the shower face. Maximum working pressure: 5.0 bar Maximum working temperature: 60°

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2312912

Size:

½” captive or conical nut.

Marking:

Tandrup A/S logo on shower handset & T-safe name/logo On the nut of the hose.

Installation Requirements:

R001 R040

Expiry date:

31/12/2028

Model:

10-031xxx xxx = Colour & length of shower hose.

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of plastic shower handsets available in various finishes. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2312380

Note:

Open Outlet use only.

Size:

½” BSP (M).

Marking:

Fima on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2028

Model:

F2067XX & F2067OTXX Where: xx indicate finish CR CHROME CN BLACK CHROME CS BRUSHED BLACK CHROME SN BRUSHED NIKEL OS BRUSHED GOLD OR GOLD BS WHITE MATT NS BLACK MATT BR OLD BRONZE RA OLD COPPER IN STAINLESS STEEL MN BLACK MARBLE MB WHITE MATT AZ INDIGO BLUE VE AGAVE GREEN AG IVORY WHITE ZL AMBER BRONZE ZS BRUSHED AMBER BRONZE HL CHAMPAGNE HS BRUSHED CHAMPAGNE

Approval Holder:

Fima Carlo Frattini

Company Name

Fima Carlo Frattini

Postcode

28010

Country

Italy

Phone

0039 0322 9549

General Email

Daniela.sgarbossa@fimacf.com

View All Listings by this Company

Range of shower handsets and overhead showers with plastic bodies (various finishes, see model). Overhead shower incorporates a stainless-steel strainer at the inlet. Maximum operating temperature 75°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240102028

Note:

Open outlet use only.

Size:

Shower Handsets: ½” BSP (M). Overhead Showers: ½” BSP (F).

Marking:

Shower Handsets: Triton on body. Overhead showers: Triton on inlet connection nut.

Installation Requirements:

R001 R040

Expiry date:

31/01/2029

Model:

Shower Handsets: 86005920-1 (Chrome plated), 86006070-1 (Black finish), 86006240-1 (Brass plated). Overhead showers: 86005920-2 (Chrome plated), 86006070-2 (Black finish), 86006240-2 (Brass plated).

Product Images

Approval Holder:

Triton Showers

Company Name

Triton Showers

Address

Triton Road, Nuneaton, Warwickshire

Postcode

CV11 4NR

Country

United Kingdom

Phone

02476 324423

General Email

paulrowley@tritonshowers.co.uk

View All Listings by this Company

Range of ‘Y’- pattern strainers with cast iron bodies (blue epoxy coated) and brass plugs (EN12164), incorporating stainless steel filters (EN10088) and EPDM ‘O’-rings. Maximum operating pressure 16 bar. Maximum operating temperature 100°C

Section:

1715 Strainers

Size:

DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300.

Marking:

Socla SAS, PN, DN & flow arrow stamped on plate located on body

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Y333 Range.

Approval Holder:

Watts Industries UK Ltd

Company Name

Watts Industries UK Ltd

Address

Colmworth Business Park Eaton Socon St Neots

Postcode

PE19 8YX

Phone

+44 (0) 1480 407074

General Email

wattsuk@wattswater.com

View All Listings by this Company