Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2310047

Floor mounted single hole, single outlet (fixed), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator or flow straightener. The product is supplied with a shower hose and handset. Maximum working pressure - 10 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 0675 Combination Tap Assemblies
Section Subtitle:: Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:: 2310047
Size:: Stainless steel braided, EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections
Marking:: PPI on rear of body.
Installation Requirements:: R001 R010 R040
Expiry date:: 31/10/2028
Model:: 140525

Product Images

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

WRAS Approval Number: #2311337

Range of break tanks and pump sets incorporating a Type AB airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10 bar. Cold water use only.

Section:: 0009 Backflow Prevention Devices
Section Subtitle:: SCHEDULE 2 - Section 6.2 - Type AB - Air gap with weir overflow.
WRAS Approval Number:: 2311337
Note:: To supply non-wholesome water systems only.
Size:: ½” BSP (F) 1” BSP (F) 1 ¼” BSP (F)
Marking:: Dutypoint, address, Model, Serial No and pressure rating on adhesive label on panel.
Installation Requirements:: R001 R415 R574
Expiry date:: 1/12/2028
Model:: VQ1 VQ2 FQ1** FC1 Example of Model Number: VQ1-05-015M Range: VQ (other options are FQ, FC & VC) Number of Pumps: 1 Nominal Flow: 05 (m3hr) Motor kw (without decimal): 015 (1.5kw) Voltage: M (T=400/3/50 M=230/1/50) *Where 16Bar outlet pressure is required, the only component changed is the pressure vessel. ** the only difference between VQ1 and FQ1 and the FC1 and the VC1 is the electrical control type.

Approval Holder:: Dutypoint Ltd.

Company Name
Dutypoint Ltd.
Address
Unit A, Quedgeley West Business Park, Hardwicke, Gloucester
Postcode
GL2 4PA
Country
United Kingdom
Phone
01452313334
General Email
austin.hill@dutypoint.com

View All Listings by this Company
Manufacturer:: Dutypoint Ltd.

Company Name
Dutypoint Ltd.
Address
Unit A, Quedgeley West Business Park, Hardwicke, Gloucester
Postcode
GL2 4PA
Country
United Kingdom
Phone
01452313334
General Email
austin.hill@dutypoint.com

View All Listings by this Company

WRAS Approval Number: #2311313

Spring loaded resilient trim check valve cartridge with stainless steel spring and EPDM `O`-ring. For insertion into specifically dimensioned bores. Maximum working pressure 16 Bar. BS6920 at 85°C

Section:: 0026 Backflow Prevention Devices
Section Subtitle:: SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:: 2311313
Size:: DN6
Marking:: Neoperl, WRAS, size, OF10, flow arrow, KK laser etched on body
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: 31.4394.0 OF10/DN6-HT

Product Images

Approval Holder:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

WRAS Approval Number: #2311336

Range of tundishes incorporating a black or grey plastic body or mild steel painted black body (128-2001 CST, 128-2003 CST, 128-2004 CST & 128-2005 CST models only). Maximum operating temperature 85°C.

Section:: 0046 Backflow Prevention Devices
Section Subtitle:: Miscellaneous.
WRAS Approval Number:: 2311336
Size:: See model
Marking:: Altecnic and product info on body. Some models are also marked with the date of manufacture. The code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019.
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: 128-2001 CST 1F x 1 ¼”F Straight Tundish (black), 128-2003 CST 1 ½”F x 2”F Straight Tundish (black), 128-2004 CST 2”F x 2 ½”F Straight Tundish (black), 128-2005 CST 2 ½”F x 3”F Straight Tundish (black), 128-4001 CST 15mm x 22mm Straight Tundish (black), 128-4002 CST 15mm x 22mm Straight Tundish (black), 128-4003 CST 15mm x 22mm Straight Tundish (black bottom and clear top), 128-4004 CST 22mm x 28mm Straight Tundish (grey), AL-400010 15mm x 22mm Straight Tundish (black), AP-400010 15mm x 22mm Straight Tundish (black), AP-400012 15mm x 22mm Straight Tundish (black), G-128-2201 CST ½” M x ¾” M Angled Tundish (black), G-128-2010 CST 15mm x 22mm Straight Dry Trap Tundish (black), Model added May 2024: AP-400011 22mm x 28mm Straight Tundish (black). Model added September 2024: 128-2002CST 1 ¼” BSP(F) x 1 ½”BSP(F)

Product Images

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #2309305

Range of ceramic cartridge headworks with plastic bodies, incorporating silicon and NBR‘O’-rings, for insertion into specifically dimensioned bores. Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Section:: 0440 Headworks
Section Subtitle:: Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:: 2309305
Size:: See model.
Marking:: Model number etched on body, company logo Gear moulded on shoulder of body.
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: N25D: 24.92mm OD N25H: 24.97mm OD N35D: 37.77mm OD N35H: 34.89mm OD N40D: 39.91mm OD N40H: 39.94mm OD F28D: 28.06mm OD

Product Images

Approval Holder:: Shanghai Gear Plastic Co., Ltd.

Company Name
Shanghai Gear Plastic Co., Ltd.
Address
Block 1, No. 33, Jucheng Road, Jiading District, Shanghai
Country
China
Phone
+86 21 59902528
General Email
www.gearcartridge.com

View All Listings by this Company
Manufacturer:: Shanghai Gear Plastic Co., Ltd.

Company Name
Shanghai Gear Plastic Co., Ltd.
Address
Block 1, No. 33, Jucheng Road, Jiading District, Shanghai
Country
China
Phone
+86 21 59902528
General Email
www.gearcartridge.com

View All Listings by this Company

WRAS Approval Number: #2403701

Range of ceramic cartridge headworks with plastic bodies and NBR seals and O-rings. For insertion into specifically dimensioned bores. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 0440 Headworks
Section Subtitle:: Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:: 2403701
Size:: 25mm OD 35mm OD 40mm OD
Marking:: Sedal, model and date of manufacture (dd/mm/yy) on body.
Installation Requirements:: R001
Expiry date:: 31/03/2029
Model:: M.M. 40 C/D M.M. 40 S/D M.M. 35 C/D M.M. 35 S/D M.M. 25 C/D M.M. 25 S/D

Approval Holder:: Kaiping Sedal Tap Components Co., Ltd.

Company Name
Kaiping Sedal Tap Components Co., Ltd.
Address
Floor 1, 3 and Part of Floor 2, No. 2 Neihuan Dong Road, Shuikou Town, Kaiping City, Guangdong Province
Country
China
Phone
+86-750-2728599
General Email
tony@ksedal.com

View All Listings by this Company

WRAS Approval Number: #2311308

Range of ceramic cartridge headworks with plastic bodies & silicone rubber seals. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:: 0440 Headworks
Section Subtitle:: Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:: 2311308
Size:: See models
Marking:: Manufacturer’s logo and model number moulded on body
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: N26HEB -25.98mm OD N26HEB-HY -25.98mm OD M35HJ -35.10mm OD M35HK – 34.77mmOD M35HY – 34.78mm OD M35HZK – 35.19mm OD N35DAW – 34.72mm OD N35HAW – 34.71mm OD N35HG – 34.74mm OD N40DAW - 39.72mm OD N40HAW – 39.69mm OD

Product Images

Approval Holder:: Kaiping Yizhan Valve Core Co. Ltd.

Company Name
Kaiping Yizhan Valve Core Co. Ltd.
Address
Building 1, No. 9, 2nd Cuihu Road, Cuishanhu New District, Kaiping City, Guangdong Province
Country
China
General Email
yizhan@twmj.com

View All Listings by this Company
Manufacturer:: Kaiping Yizhan Valve Core Co. Ltd.

Company Name
Kaiping Yizhan Valve Core Co. Ltd.
Address
Building 1, No. 9, 2nd Cuihu Road, Cuishanhu New District, Kaiping City, Guangdong Province
Country
China
General Email
yizhan@twmj.com

View All Listings by this Company

WRAS Approval Number: #2311320

Thermostatic cartridges with plastic or brass bodies, and EPDM ‘O’ rings and stainless steel strainers. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. BS6920 85°C.

Section:: 0442 Thermostatic cartridges
Section Subtitle:: Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:: 2311320
Size:: see model
Marking:: Qilo printed on body.
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: Plastic bodies: 814116: 32.64mm OD, 814125: 26.84mm OD. Brass bodies: 814126: 25.71mm OD, 814122: 32.29mm OD.

Product Images

Approval Holder:: Zhejiang Qilong Sanitary Ware Co., Ltd

Company Name
Zhejiang Qilong Sanitary Ware Co., Ltd
Address
The Intersection of Yufu Road and Weiwu Road, Fengjiang Street, Luqiao District, Taizhou City, Zhejiang Province
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Qilong Sanitary Ware Co., Ltd

Company Name
Zhejiang Qilong Sanitary Ware Co., Ltd
Address
The Intersection of Yufu Road and Weiwu Road, Fengjiang Street, Luqiao District, Taizhou City, Zhejiang Province
Country
China

View All Listings by this Company

WRAS Approval Number: #2311331

‘VT30’ range of thermostatic cartridges with a plastic body and EPDM ‘O’-rings and stainless steel strainers. For insertion into specifically dimensioned bores. Maximum working pressure 16.0 bar. BS6920 70°C.

Section:: 0442 Thermostatic cartridges
Section Subtitle:: Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:: 2311331
Size:: 32.60mm OD
Marking:: Vernet France and batch no. on body
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: VT30-001, VT30-004, VT30-005, VT30-006, VT30-007, VT30-012, VT30-013, VT30-014, VT30-016, VT30-017, VT30-021, VT30-023, VT30-036, VT30-037, VT30-043, VT30-002, VT30-011, VT30-024, VT30-026, VT30-008, VT30-010, VT30-035.

Approval Holder:: VERNET GROUP

Company Name
VERNET GROUP
Address
21-27 route d’Arpajon Ollainville – BP31 ARPAJON
Postcode
91291
Country
France
General Email
roze@vernet.fr

View All Listings by this Company
Manufacturer:: VERNET GROUP

Company Name
VERNET GROUP
Address
21-27 route d’Arpajon Ollainville – BP31 ARPAJON
Postcode
91291
Country
France
General Email
roze@vernet.fr

View All Listings by this Company

WRAS Approval Number: #2311343

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:: 0445 Combination Tap Assemblies
Section Subtitle:: Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:: 2311343
Size:: Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.
Marking:: PPI on Body
Installation Requirements:: R001 R090
Expiry date:: 30/11/2028
Model:: 177014

Product Images

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company