Range of horizontal or vertical expansion vessels with an EPDM membrane. Maximum working pressure 10.0 or 16.0 bar (please refer to model). Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

Size:

1” BSP (M), 1½” BSP (M) & 2” BSP (M).

Marking:

Zilio Industries Spa, AQUASYSTEM, model, max temp, max pressure CE and other technical information on label on body

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Vertical models = maximum working pressure 10.0 bar: VA35 VAV50 VAV60 VAV80 VAV100 VAV150 VAV200 VAV300 VAV500 VAV750 VAV1000 AR35 Horizontal models = maximum working pressure 10.0 bar: VAO35 VAO50, VAO60, VAO80 VAO100, VAO150, VAO200 VAO300 Vertical models = maximum working pressure 16.0 bar: VB35 VBV50 VBV60 VBV80 VBV100 VBV150 VBV200 VBV300

Approval Holder:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Filling loop assemblies comprising of a stainless steel braided, EPDM lined hose, double check valve assembly with isolation valve verified by test (suitable for backflow protection against fluid category 3) and either a straight or tee isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:

1015 Filling Loop

Size:

15mm compression inlet/outlet

Marking:

WRAS, date of manufacture (YYYY) and Valtech on crimp connection of hose. CR and flow arrow on double check valve assembly.

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

FH-SS-06-01 (STRAIGHT ISOLATION VALVE) & FH-SS-06-02 (TEE ISOLATION VALVE) FILLING LOOP ASSEMBLIES

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of tap outlets with plastic bodies incorporating a filter within the body, incorporating a hollow fibre filter membrane. The inlet of the filter incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a pastic flow regulator. Maximum operating temperature 60°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2206333

Note:

Open outlet use only.

Size:

90-001861: M22 (M) 90-001862: M22 (F)

Marking:

T-Safe (brand of Johs. Tandrup A/S) on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2027

Model:

02-831401 Medical Tap Filter Fixed Position 31 Day. 02-831402 Medical Tap Filter Fixed Position 31 Day, Sterile. 02-831403 Medical Tap Filter Fixed Position 62 Day. 02-831404 Medical Tap Filter Fixed Position 62 Day, Sterile. 02-831405 Medical Tap Filter Fixed Position 92 Day. 02-831406 Medical Tap Filter Fixed Position 92 Day, Sterile. Filters are to be installed with 90-001861 Fixed Position Tap Adapter, Gasket seal & 90-001862 Fixed Position Tap Adapter, O-ring seal.

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Wavin range of Tigris K1 (plastic bodies) and M1 (brass bodies) press-fit fittings for use with Tigris PEX/AL/PE HD (50mm & 63mm) and Tigris PERT/AL/PERT WT (75mm) barrier pipes. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

2206029

Size:

Please refer to model.

Marking:

Pipes: Wavin, size, date of manufacture, EN ISO 21003 WRAS Tmax = 95°C/6Bar Fittings: Wavin & size on the crimp sleeve PPSU, W & size on the body

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Pipe: 3004372 Tigris PEX AL PE HD Pipe Barrier Pipe 3028271 Tigris PEX AL PE HD Barrier Pipe 3053971 Tigris PERT AL PE HD Barrier Pipe - from July 2022 this pipe will be known as 3053972 Tigris PERT AL PERT WT barrier pipe. Fittings Tigris K1 range: 3027832 Coupler 50mm x 50mm 3027847 Coupler 63mm x 63mm 3065639 Coupler 75mm x 75mm 3024667 Elbow 90° 50mm x 50mm 3027848 Elbow 90° 63mm x 63mm 3065643 Elbow 90° 75mm x 75mm 3027829 Tee- 50mm 3027853 Tee-63mm 3065644 Tee-75mm 3024668 Elbow 45° 50mm 3027849 Elbow 45° 63mm 3065642 Elbow 45° 75mm 3027830 Tee- Reduced 50mm x 25mm x 50mm 3027842 Tee-Reduced 50mm x 32mm x 50mm 3027831 Tee- Reduced 50mm x 40mm x 50mm 3027854 Tee-Reduced 63mm x 40mm x 63mm 3027855 Tee-Reduced 63mm x 32mm x 63mm 3027856 Tee-Reduced 63mm x 25mm x 50mm 3065645 Tee-Reduced 75mm x 50mm x 75mm 3065646 Tee-Reduced 75mm x 40mm x 75mm 3065647 Tee-Reduced 75mm x 32mm x 75mm 3027833 Coupler Reduced 50mm x 32mm 3027834 Coupler Reduced 50mm x 40mm 3027850 Coupler Reduced 63mm x 50mm 3027852 Coupler Reduced 63mm x 40mm 3065640 Coupler reduced 75mm x 63mm 3065641 Coupler reduced 75mm x 50mm 3027837 Connector (M) 50mm x 1 1/2" BSP Fittings Tigris M1 range: 4032698 Connector (F) 50mm x 1 1/2" BSP 4032699 Connector (F) 63mm x 2" BSP 4049179 Connector (F) 75mm x 2 1/2" BSP 4032567 Elbow 90° 50mm 4032568 Elbow 90° 63mm 4049172 Elbow 90° 75mm 4032658 Coupler 50mm 4032659 Coupler 63mm 4049168 Coupler 75mm 4032684 Connector (M) 50mm x 1 1/2" BSP 4032685 Connector (M) 63mm x 2" BSP 4049178 Connector (M) 75mm x 2 1/2" BSP

Approval Holder:

Wavin Ltd.

Company Name

Wavin Ltd.

Address

Edlington Lane, Edlington Doncaster

Postcode

DN12 1BY

Country

United Kingdom

Phone

01709 856300

View All Listings by this Company

Manufacturer:

Wavin Ltd.

Company Name

Wavin Ltd.

Address

Edlington Lane, Edlington Doncaster

Postcode

DN12 1BY

Country

United Kingdom

Phone

01709 856300

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to EN 1057. The HLSRDPMFWT and HLSRDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208803

Size:

Solder ring: 8mm-54mm and ½” - 1” (see model). Threaded connections: 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

HLSR11ECC-a Elbow 90 degree C X C: 8mm-54mm. HLSR11ECC-b Street Elbow 90 degree Ftg X C: 8mm-54mm. HLSR11ECC-c Street Elbow 45 degree Ftg X C: 8mm-54mm. HLSR11ECC-d Street Elbow 45 degree Long Turn Ftg X C: 8mm-54mm. HLSR11ECC-e Elbow 45 degree C X C: 8mm-54mm. HLSR11ECC-f Elbow 45 degree Long Turn C X C: 8mm-54mm. HLSR11ECC-g Street Elbow 90 degree Long Turn Ftg X C: 8mm-54mm. HLSR11ECC-h Elbow 90 degree Long Turn C X C: 8mm-54mm. HLSR20CC-a Slip Straight Coupling C X C: 8mm-54mm. HLSR20CC-b Straight Coupling with dot C X C: 8mm-54mm. HLSR20CC-c Straight Coupling with groove C X C: 8mm-54mm. HLSR21RCC-a Fitting Reducer Ftg X C: 8mm-54mm. HLSR21RCC-b Reducing Coupler C X C: 8mm-54mm and ½”-1”. HLSR30TCC Equal TEE CxCxC: 8mm-54mm. HLSR31TRC Reducing Tee CxCxC: 8mm-54mm. HLSR40CAP Cap: 8mm-54mm. HLSRBGQW Partial Crossover Ftg x C: 12mm-28mm. HLSRGQW Full Crossover C x C: 12mm-28mm. HLSRYJWT Reducing Elbow 90 degree C X C: 15mm-54mm. HLSRZDWT BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLSRZDZT STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLSRDPMFWT Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. HLSRDPMFZT Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company