Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The Movitec VME models and VE/VSE models added May 2025 can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: Comeo C models 10.0 bar, Movitec VM models with an oval flange or VME models with integral check valve 16.0 bar, All other Movitec VM models 25.0 bar. Models added May 2025: Movitec V/VS models with an oval flange or VE models with integral check valve 16.0 bar, All other Movitec V/VS models and Movitec HI/HSI models 25.0 bar. Maximum operating temperatures: Existing models: Comeo C and Movitec VME models with integral check valve 60°C, all other model variants 100°C. Models added May 2025: Movitec VE models with integral check valve 60°C, all other model variants 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250302718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Movitec VM (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Comeo C 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. Sizes added May 2025: Movitec V/VS (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Movitec V/VS (-/F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. Movitec V/VS F 25/40/60/90/125 B: Round flange: DN65, DN80, DN100, DN125. Movitec HI/HSI 2/4/6 B: 1¼” BSP or NPT (F). Movitec HI/HSI 10/15 B: 2” BSP or NPT (F).

Marking:

KSB logo, model name, PN, WRAS and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Movitec VM (-/F/E/V/T) x yy B, Comeo C x yy B. Where: VM = Vertically oriented (AISI 304) with close coupled motor/ pump (pump/ motor shaft combined). No indication (VM only) = oval flange. F (VMF) = round flange. E (VME) = external tread. V (VMV) = Victaulic. T (VMT) = Triclamp. x = flow rate m³/h (2, 4 or 6). yy = no. of stages Movitec VM and Comeo C ranges 1-6 stages. Models added May 2025: Movitec V/VS (-/F/E/V/T) x yy B, Movitec V/VS (-/F/E/V/T) 15 yy C. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages Movitec V/VS……2 B 1-30 stages. Movitec V/VS……4/6 B 1-26 stages. Movitec V/VS……10 B 1-21 stages. Movitec V/VS……15 B/C 1-17 stages. -------------------------------------- Movitec V/VS F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90 or 125). yy = no. of stages Movitec V/VS……25 B 1-12 stages. Movitec V/VS……40/60 B 1-10 stages. Movitec V/VS……90 B 1-6 stages. Movitec V/VS……125 B 1-4 stages. -------------------------------------- Movitec HI/HSI x yy B, Movitec HI/HSI 15 yy C. Where: H = Vertically oriented (AISI 304). HS = Vertically oriented (AISI 316). I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages Movitec HI/HSI 2/4/6 B 1-14 stages. Movitec HI/HSI 10 B/15 B/15 C 1-8 stages.

Approval Holder:

KSB Manufacturing B.V.

Company Name

KSB Manufacturing B.V.

Address

Kalkovenweg 13 2401LI Alphen Aan Den Rijn

Country

Netherlands

View All Listings by this Company

Shower handset with a stainless-steel body (various finishes - see model) and silicone nozzles. The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250308010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Dolphin Solutions Limited logo (D with a dolphin) on body.

Installation Requirements:

R001 R040

Expiry date:

31/03/2030

Model:

DB3025.A.BBB Where: The suffix .a in the above codes will be a number 1 - 5 to denote the finish: .1 to denote brushed/satin polished. .2 to denote mirror polished. .3 to denote brushed/satin polished with PVD coating. .4 to denote mirror polished with PVD coating. .5 to denote powder coated. .6 - .9 to denote other material and finish options. The suffix .bbb in the above code indicates the colour of the PVS or powder coat. It can be either two or three digits from 01-999.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Range of overhead shower and shower handsets with (brass or plastic bodies – various finishes), incorporating a stainless-steel strainer on the inlets. Open outlet use only Maximum operating temperature – 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241188019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Shower handsets - ½” BSP (M) Overhead showers – ½” BSP (F)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

30/11/2029

Model:

704418 110MM 3 FUNCTION HANDSET AL089 - DARK GREY PLATE 704307 110MM 3 FUNCTION HANDSET AL059 706901 110MM 3 FUNCTION HANDSET MATT BLACK AL242 707540 99MM SHOWER HANDSET CHROME AL255 ROUND ACY1004 100MM FIXED HEAD ROUND CHROME ACY1007 300MM FIXED HEAD ROUND CHROME 704336 200MM FIXED HEAD (CP) AL065 SQUARE 704323 200MM FIXED HEAD (CP) AL070 ROUND 704426 192MM FIXED HEAD (CP) AL088 DARK GREY PLATE 704477 200MM FIXED HEAD (CP) AL087 SQUARE 707543 200MM FIXED HEAD CHROME AL259 ROUND 706906 200MM ROUND FIXED HEAD MATT BLACK AL243 Added Jan 2026: 707344 200MM FIXED HEAD AL191 - SQUARE MB 707335 192MM FIXED HEAD MATT BLACK AL180

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of shower outlets, (plastic bodies - chrome plated) incorporating a plastic flow regulator. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set. Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250404023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0, 24 523 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set.

Marking:

Hansgrohe on face plate

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

24 520 XX0 24 521 XX0 24 530 XX0 24 531 XX0 24 540 XX0 24 541 XX0 24 550 XX0 24 551 XX0 24 573 180 300190XX 300191XX 300193XX 300194XX 310190XX 310193XX 310194XX 340190XX 340191XX Model added May 2025: 24 523 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Wall mounted bib tap with a nickel-plated brass body, chrome plated brass ball, NBR ‘O’-rings and gasket, and PTFE seats. The product incorporates a hose union outlet with an integral plastic flow straightener. Maximum working pressure 20.0 bar. Maximum operating pressure 85°C.

Section:

1750 Taps

Section Subtitle:

Draw off bib tap(s)

WRAS Approval Number:

241015016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) inlet x hose union outlet (Ø15mm).

Marking:

GALA on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

4304

Approval Holder:

GALA RS INC

Company Name

GALA RS INC

Address

8605 SANTA MONICA BLVD 30327 WEST HOLLYWOOD，CA 90069

Country

United States

View All Listings by this Company