Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250102006

“<A> Press Copper M Profile” series press fittings with a copper body and EPDM ‘O’-rings, for use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250102006
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm - 54mm.
Marking:: A (manufacturers logo) and size on body.
Installation Requirements:: R001
Expiry date:: 31/01/2030
Model:: <A> Press Copper M Profile series: 90° Street Bend: APWG5001 150000, APWG5001 180000, APWG5001 220000, APWG5001 280000, APWG5001 350000, APWG5001 420000, APWG5001 540000. 90° Bend: APWG5002 150000, APWG5002 180000, APWG5002 220000, APWG5002 280000, APWG5002 350000, APWG5002 420000, APWG5002 540000. 45° Obtuse Street Elbow: APWG5041 150000, APWG5041 180000, APWG5041 220000, APWG5041 280000, APWG5041 350000, APWG5041 420000, APWG5041 540000. 45° Obtuse Elbow: APWG5040 150000, APWG5040 180000, APWG5040 220000, APWG5040 280000, APWG5040 350000, APWG5040 420000, APWG5040 540000. Crossover Short: APWG5086 150000, APWG5086 180000, APWG5086 220000. 60 deg Copper bend with plain ends: APWG5360 280000, APWG5360 350000, APWG5360 420000, APWG5360 540000. 30 deg Copper bend with plain ends: APWG5330 280000, APWG5330 350000, APWG5330 420000, APWG5330 540000. 15 deg Copper bend with plain ends: APWG5315 280000, APWG5315 350000, APWG5315 420000, APWG5315 540000. 45 deg Copper bend with plain ends: APWG5345 280000, APWG5345 350000, APWG5345 420000, APWG5345 540000. Equal Tee: APWG5130 151515, APWG5130 181818, APWG5130 222222, APWG5130 282828, APWG5130 353535, APWG5130 424242, APWG5130 545454. Reduced Tee: APWG5130 152215, APWG5130 181515, APWG5130 181518, APWG5130 181815, APWG5130 281528, APWG5130 221222, APWG5130 181218, APWG5130 221515, APWG5130 221522, APWG5130 221822, APWG5130 222215, APWG5130 281828, APWG5130 282228, APWG5130 351535, APWG5130 352235, APWG5130 352835, APWG5130 421542, APWG5130 422242, APWG5130 422842, APWG5130 423542, APWG5130 542254, APWG5130 542854, APWG5130 543554, APWG5130 544254. Pipe Cross: APWG5901 181500, APWG5901 221500, APWG5901 281500. Fitting Reducer: APWG5243 181500, APWG5243 221500, APWG5243 221800, APWG5243 281500, APWG5243 281800, APWG5243 282200, APWG5243 352200, APWG5243 352800, APWG5243 422200, APWG5243 422800, APWG5243 423500, APWG5243 542800, APWG5243 543500, APWG5243 544200. Straight Coupler: APWG5270 150000, APWG5270 180000, APWG5270 220000, APWG5270 280000, APWG5270 350000, APWG5270 420000, APWG5270 540000. Reduced Coupler: APWG5240 221500. Cap: APWG5301 150000, APWG5301 180000, APWG5301 220000, APWG5301 280000, APWG5301 350000, APWG5301 420000, APWG5301 540000. Slip Coupler: APWG5270S150000, APWG5270S180000, APWG5270S220000, APWG5270S280000, APWG5270S350000, APWG5270S420000, APWG5270S540000.

Approval Holder:: Conex Universal Limited

Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

WRAS Approval Number: #241002051

Range of system 2000 of flange adaptors and connectors with ductile iron bodies (Blue Epoxy Coated) incorporating EPDM seals. For use with PE pipe manufactured to En 12201 & PVC Pipe manufactured to DIN 8062. Maximum working pressure: 16.0Bar Cold water use only.

Section:: 1220 Fittings for use with Tube and Pipe
Section Subtitle:: Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.
WRAS Approval Number:: 241002051
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below
Marking:: Hawle logo and size on body.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: System 2000 Range: 0400 DN50 – DN600 0430 DN63 – DN355 5045 DN80 & DN100 8075 DN63 – DN315 8515 DN63 – DN225 8525 DN63 – DN225 8535 DN63 – DN315 8545 DN63 – DN315 8555 DN63 – DN315 8557 DN63 – DN315

Approval Holder:: E-Hawle Armaturenwerke GmbH

Company Name
E-Hawle Armaturenwerke GmbH
Address
Wagrainer Stabe 13 AT 4840 Vocklabruck

View All Listings by this Company

WRAS Approval Number: #2112373

Jet range of water meters with brass blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure16.0 bar. Maximum operating temperature 85°C.

Section:: 1505 Water Meters
Size:: see model
Marking:: JET, WRAS and other technical info on dial.
Installation Requirements:: R001 R120
Expiry date:: 31/12/2026
Model:: ¾” BSP (M) 172033 JET NON PULSED COLD WATER METER 15 FTG 172035 JET PULSED COLD WATER METER 15 FTG 172041 JET PULSED HOT WATER METER 15 FTG 1” BSP (M) 172034 JET NON PULSED COLD WATER METER 20 FTG 172036 JET PULSED COLD WATER METER 20 FTG 172042 JET PULSED HOT WATER METER 20 FTG 1 ¼” BSP (M) 172037 JET PULSED COLD WATER METER 25 FTG 172043 JET PULSED HOT WATER METER 20 FTG 1 ½” BSP (M) 171038 JET PULSED COLD WATER METER 32 FTG 172044 JET PULSED COLD WATER METER 20 FTG 2” BSP (M) 172039 JET PULSED COLD WATER METER 32 FTG 172045 JET PULSED COLD WATER METER 20 FTG 2 ½” BSP (M) 172040 JET PULSED COLD WATER METER 32 FTG 172046 JET PULSED COLD WATER METER 20 FTG

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

WRAS Approval Number: #2309381

Range of water meters with brass bodies and EPDM ‘O’-rings and plastic strainer on inlet. Maximum working pressure 16 bar. Cold water use only.

Section:: 1505 Water Meters
Size:: 1 1/4” BSP (M) 1 ½” BSP (M) 2” BSP (M)
Marking:: Resideo & technical information on dial face. Flow arrow cast on body.
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: EW1100CC2800 EW1100CC3900 EW1100CC4600 EW1100CM2800 EW1100CM3900 EW1100CM4600 - DN25, DN32 and DN40

Approval Holder:: Pittway Sarl

Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company

WRAS Approval Number: #2310406

Hydraulic circuit used to control the water path within the heating and sanitary boiler, with plastic body incorporating filter, flow regulator, plate heat exchanger and EPDM O-rings. Maximum working pressure 7.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Size:: ¾”BSP(M) x ½”BSP(M).
Marking:: Company logo on body (CHUNHUi)
Installation Requirements:: R001 R008
Expiry date:: 31/10/2028
Model:: FUSION ASTRO- Engineering Plastics Hydraulic Circuit.

Approval Holder:: THE ELECTRIC HEATING COMPANY LTD

Company Name
THE ELECTRIC HEATING COMPANY LTD
Address
Block 5, Unit 40 Third Road Blantyre Ind Est GLASGOW
Postcode
G72 0UP
Country
United Kingdom
Phone
07986970466
General Email
chris@electric-heatingcompany.co.uk

View All Listings by this Company
Manufacturer:: Zhejiang Chunhui Intelligent Control Co Ltd

Company Name
Zhejiang Chunhui Intelligent Control Co Ltd
Address
No. 288 Chunhui Industrial Rd. Shangyu, Zhejiang
Country
China
General Email

View All Listings by this Company
Manufacturer:: Zhejiang Chunhui Intelligent Control Co Ltd

Company Name
Zhejiang Chunhui Intelligent Control Co Ltd
Address
No. 288 Chunhui Industrial Rd. Shangyu, Zhejiang
Country
China
General Email

View All Listings by this Company