WC direct flush valve consisting of a solenoid valve that controls the flow. The solenoid can be operated via a infrared sensor or a control button. The product incorporates a flow restrictor and supplied with 90,100 and 125 Ltr/min flow regulators. Maximum working pressure – 2.0 Bar Maximum operating temperature - 23 °C

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2210041

Note:

Solenoid is to be fitted where light is excluded. The flow rates for the flow regulators have not been verified by test.

Size:

Direct flush valve – 1” BSP (M) inlet and outlet.

Marking:

Wallgate on control box body Wallgate, size, flow arrow, on body.

Installation Requirements:

R001 R008 R120 R090 R410

Expiry date:

31/10/2027

Model:

DFKIT03-2 Direct Flush valve assembly.

Product Images

Approval Holder:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company

Manufacturer:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company

Dual flush WC outlet valve incorporating an ABS body, operated via a push button assembly or a battery powered infra red sensor for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2210301

Size:

2” BSP (M).

Marking:

NAT® on body.

Installation Requirements:

R001 R581

Expiry date:

31/10/2027

Model:

NB109-2 Touchless Sensor Flush Valve 3L/6L.

Approval Holder:

Xiamen Nat Plumbing Inc.

Company Name

Xiamen Nat Plumbing Inc.

Address

No.1, West Houxiang Road, Haicang District, Xiamen

Country

China

Phone

86-592-6538317

View All Listings by this Company

Manufacturer:

Xiamen Nat Plumbing Inc.

Company Name

Xiamen Nat Plumbing Inc.

Address

No.1, West Houxiang Road, Haicang District, Xiamen

Country

China

Phone

86-592-6538317

View All Listings by this Company

Range of plate heat exchangers with stainless steel plates, for primary and secondary circulation. Models E040-2M-GB6 and R040-H2M-G6B are secondary use only. Maximum working pressure - R040-HNM-G6B range = 30.0 Bar and E040-NM-GB6 range = 20.0 Bar Maximum operating temperature - 99 °C

Section:

1350 Heat Exchangers

Size:

3/4" BSP Male

Marking:

Kaori Logo, Model, Max Pressure & Max Temp on Adhesive Label on Body. Model on Top Plate.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

R040-HNM-G6B - “N” = Number of plates 2-40 plates E040-NM-GB6 - “N” = Number of plates 2-60 plates

Approval Holder:

Kaori Heat Treatment Co., Ltd

Company Name

Kaori Heat Treatment Co., Ltd

Address

No 5-2 Chi Lin North Road Chung Li District 320030

View All Listings by this Company

Manufacturer:

Kaori Heat Treatment Co., Ltd

Company Name

Kaori Heat Treatment Co., Ltd

Address

No 5-2 Chi Lin North Road Chung Li District 320030

View All Listings by this Company

Alfa Laval range of copper brazed and stainless-steel fusion bonded, stainless steel heat exchangers in various sizes ranging from 4 plates to 300 plates. Maximum working pressures and temperatures: CB10, CB11, CB15, CB16, CB16AQ, CB18, CB18AQ & CB18DW: S1/S2 circuit: 5 Bar. S3/S4 circuit 10 Bar. Max working temperature 150°C. CB20 & CB20AQ: S1/S2 circuit: 16 Bar. S3/S4 circuit 16 Bar. Max working temperature 225°C. CB65, CB65AQ & CBH65: S1/S2 circuit: 18 Bar. S3/S4 circuit 37 Bar. Max working temperature 225°C. CBH16 & CBH18: S1/S2 circuit: 32 Bar. S3/S4 circuit 32 Bar. Max working temperature 150°C. Maximum operating temperatures detailed above are for primary circuits only, secondary circuits approved to 99oC. Models added March 2023: CBH30: 50 Bar (S1/S2/S3/S4) & 225.0°C, CBH112: 45 Bar (S1/S2) 51 Bar (S3/S4) & 225.0°C, CB30: 41 Bar (S1/S2/S3/S4) & 225.0°C, CB60: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB60AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CBH60: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB62: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB62AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CBH62: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB30AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB110: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB110AQ: 37 Bar (S1/S2/S3/S4) & 225.0°C, CBH110: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB112: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB112AQ: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB24: 29 Bar (S1/S2) 37 Bar (S3/S4) & 225.0°C, CB24AQ: 29 Bar (S1/S2) 37 Bar (S3/S4) & 225.0°C, ANTW66: 29.0 Bar (S1/S2/S3/S4), ANTW18: 23 Bar (S1/S2) 28 Bar (S3/S4) 225.0°C and RM11: 15 Bar (S3/S4) & 225.0°C. Maximum operating temperatures detailed above are for primary circuits only, secondary circuits approved to 99oC.

Section:

1350 Heat Exchangers

Size:

See Models

Marking:

CB10, CB15, CB16, CB18 models: Manufacturers logo, model number and technical information on label on from of heat exchanger. CB20 and CB65 models: Manufacturers logo, model number, serial number, manufacturing date (yyyy.mm.dd), minimum and maximum working temperature, minimum and maximum working pressure and technical information on label on front of heat exchanger. Models added March 2023: Alfa Laval logo, Model, serial number on adhesive label.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

CB10: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB11: Minimum number of plates 8, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB15: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB16/CBH16: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB16AQ: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections. CB18/CBH18: Minimum number of plates 4, Maximum number of plates 52. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB18AQ: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections. CB18DW: Minimum number of plates 4, Maximum number of plates 52. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB20: Minimum number of plates 10, Maximum number of plates 110. Connection types: External thread or soldered. Connection Size/types: ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB20AQ: Minimum number of plates 10, Maximum number of plates 110. Connection Size/types: ¾” or 1” Male BSP connections. CB65/CBH65: Minimum number of plates 10, Maximum number of plates 150. Connection types: External thread or soldered. Connection Size/types: ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB65AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” or 1” Male BSP connections Models added March 2023: CB30: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB30AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH30: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB60: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB60AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH60: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB62: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB62AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH62: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB110: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB110AQ: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CBH110: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB112: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB112AQ: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CBH112: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. RM11: Minimum number of plates 28, Maximum number of plates 28. Connection Size/types: 22mm ID - soldered connection for use with copper tube conforming to EN 1057. CB24: Minimum number of plates 10, Maximum number of plates 56. Connection Size/types: ¾” - 2” BSP M. ANTW18: Minimum number of plates 10, Maximum number of plates 50. Connection Size/types: ¾” - 2” BSP M. ANTW66: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M.

Approval Holder:

Alfa Laval Ltd

Company Name

Alfa Laval Ltd

Address

Doman Road Camberley Surrey

Postcode

GU15 3DN

View All Listings by this Company

Range of static ultrasonic bulk water meters with stainless steel bodies and EPDM 'O'-rings. The products are supplied with two sets of optional (green) gaskets. Maximum operating temperature: Products marked T50: 65°C. Products marked T30: cold water use only.

Section:

1505 Water Meters

Size:

DN50 - DN100 flanged inlet and outlet.

Marking:

DIEHL METERING, CE, DN, maximum pressure, model name, T30 or T90, and other technical info on meter housing. Diehl Metering GmbH logo and flow arrow on body.

Installation Requirements:

R001 R008 R120

Expiry date:

31/03/2027

Model:

HYDRUS 2.0 Type 174 stainless steel (DN50-80: 200mm length, DN100: 250mm length).

Approval Holder:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestraße 13 91522 Ansbach

Country

Germany

View All Listings by this Company

Manufacturer:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestraße 13 91522 Ansbach

Country

Germany

View All Listings by this Company