Directory Search Results

Print List

#2110032

Range of wall mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. The products are supplied with plastic backnuts and a stainless steel braided PEX lined flexible hose assembly for installation between the tap and the solenoid valve. The HK-Cha models added September are also supplied with a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2110032
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½ captive nut end connection.
Marking:
Fastdry (trademark of Hokwang Industries Co., Ltd.) on spout
Installation Requirements:
R001 R007 R009 R040
Expiry date:
31/10/2026
Model:
ECOTAP-W FA01, ECOTAP-W FA02, InnoWash FA. Models added Sept 2022: HK-Cha, HK-Cha Shorter Ver..

Approval Holder:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425
General Email
hokwang@hokwang.com

View All Listings by this Company
Manufacturer:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425
General Email
hokwang@hokwang.com

View All Listings by this Company

Print This Approval


#2106050

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106050
Size:
1/2” BSP (M).
Marking:
NOKEN & SMARTLINE ON FRONT OF CISTERN NOKEN, MODEL & FLUSH VOLUME ON INSIDE OF CISTERN
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
100294223 3-4.5 Ltr. 100294207 3-4.5 Ltr. 100294230 3-6Ltr. 100294216 3-6Ltr.

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111381
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2107118

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headworks with either a single lever, cross top or dome type operating member (see model). The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2107118
Size:
M10
Marking:
QIXI and WRAS on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2026
Model:
Ceramic Disc, Single Lever: SH-T8032AW, SH-T8063LW, SH-T8752AW. Ceramic Disc, Cross Top: SH-T8032W, SH-T8044W, SH-T8044AW, SH-T8063AW, SH-T8662W. Ceramic Disc, Dome Type: SH-T8063W.

Approval Holder:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company

Print This Approval


#2107119

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a waterfall type with or without a stainless-steel mesh (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2107119
Size:
M10
Marking:
QIXI and WRAS on rear of body
Installation Requirements:
R001 R006 R160
Expiry date:
31/07/2026
Model:
Waterfall with Mesh: SH-T8112W, SH-T8112L, SH-T8412AW, SH-T8612CW, SH-T8612AMW, SH-T8612AL, SH-T8612W, SH-T8612L, SH-T8642AW, SH-T8852W, SH-T8852MW, SH-T8942W. Waterfall without Mesh: SH-T8772W, SH-T8772NW, SH-T8772L, SH-T8772AW, SH-T8772AMW, SH-T8772AL.

Approval Holder:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 303 of 640

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.