‘UPM4’ range of circulator pumps with either a composite (plastic) or stainless-steel body, plastic impellor and EPDM ‘O’-rings. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C ((CIL3) plastic body models), 99°C (S/Steel body models).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211908

Note:

R008 does not apply to the stainless steel body models. R415 does not apply if used on a closed circuit.

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and date of production (PC code = PC: YYWWxxx) on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2027

Model:

UPM4/UPM4L A BBB CC-DD E EEE F GGG Where: UPM4 - pump series type - standard, UPM4L - pump series type - large (motor) version with extended P1. UPM4XL (Added October 2024) - Extra-large version with extended performance. UPM4XXL (Added June 2025) - Extra-large version with extended performance. A = K - for condensing environments. BBB = Control variant - PWM or LIN bus. CC = Nominal diameter - 15 = G1”, 25 = G1½”, 32 = G2”. DD = Maximum head, value divided by 10 = head in m, e.g. 20 = 2.0m. Can be 20, 30, 40, 45, 50, 55, 60, 65, 70, 75, 90 or 100. (90 variant added October 2024. 100 variant added June 2025). E EEE = Pump housing and port length. N 130 and N 180 = Stainless steel and 130 or 180mm port length. CIL3PP = Composite (plastic), which is only available as 130mm port length, so no value Is mentioned. F = Control box orientation. Can be 3, 6, 9, or 12. GGG = Customer code. Can be any combination or letters and numbers.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘Homebooster’ pump with stainless steel body, plastic impeller and EPDM rubber ‘O’-rings. The product is supplied with two loose brass ¾” captive nut x ½” BSP (M) connectors and fibre gaskets for installation on the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301901

Size:

¾” BSP (M) inlet x outlet (to pump). ½” BSP (M) inlet x outlet (to optional brass connectors).

Marking:

Grundfos and Grundfos logo, type, Product no. and technical info on adhesive label on motor housing. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

31/01/2028

Model:

UPA 15-90 N 160 Homebooster.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of circulation pumps with a stainless steel body, plastic impeller and a silicone ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2310317

Size:

½” BSP (F).

Marking:

GREENPRO (registered trademark of Zhejiang Wigo Intelligence Pump Co., Ltd.), type, pressure, WRAS and other technical information on adhesive label on pump face. Flow arrow on body

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

RS12/1.2EM. RS12/1.2EMB.

Approval Holder:

Zhejiang Wigo Intelligence Pump Co., Ltd.

Company Name

Zhejiang Wigo Intelligence Pump Co., Ltd.

Address

No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Wigo Intelligence Pump Co., Ltd.

Company Name

Zhejiang Wigo Intelligence Pump Co., Ltd.

Address

No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang

Country

China

View All Listings by this Company

Horizontal 5 stage pump with stainless steel body, stainless steel impellers, EPDM and silicone ‘O’-rings. Maximum working pressure 6.2 Bar. BS6920 40°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2311316

Size:

1¼” BSP (F).

Marking:

Swiss Pump Company AG logo (‘SPCO®’), model and technical information on adhesive label on pump body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2028

Model:

Z(HMIA).

Approval Holder:

Swiss Pump Company AG

Company Name

Swiss Pump Company AG

Address

Moosweg 36,3645 Thun - Gwatt

Country

Switzerland

View All Listings by this Company

`UPM3` range of single stage circulator pumps, with stainless steel or plastic bodies, plastic impellers, ceramic shafts and bearings, EPDM 'O'-rings and seals. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240507701

Size:

Stainless steel body models (N): 1" BSP (M) (retrospectively added June 2024), 1½” BSP (M) & 2” BSP (M). Composite (plastic) body models (CIL3): 1” BSP (M).

Marking:

Grundfos logo, Grundfos and model on top of pump housing. Production number, serial number, and technical information on side of pump housing. Stainless steel models also have a flow arrow on the body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

UPM3 **1-**2 N ***3 (GFNxx-). UPM3 **1-**2 - CIL3 ***3 (GFNxx-). Model added November 2024: ALPHA SOLAR 25-**2 N 180. Where: UPM3 & ALPHA SOLAR = pump type. For UPM3 these can also be: UPM3 HYBRID, UMP3 DHW, UPM3 K, UPM3 AUTO L UPM3 FLEX AS. **1 = size of inlet/outlet connection: N models – 25 = 1 ½”, 32 = 2”. CIL3 models – 15 = 1”. **2 = maximum head (dm): 20, 40, 50, 60, 70, 75 (all models). 105, 145 (stainless steel body models only). N = stainless steel body. CIL3 = composite (plastic) body. ***3 = port to port length in mm: 130 (all models) or 180 (ALPHA SOLAR 1½” model and 2” N models only).

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240206701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).

Marking:

Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Company Name

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Address

View All Listings by this Company

Circulation pump with a stainless steel body. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241104706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M)

Marking:

Archergas, model and technical information on case. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

DHW15 Circulation Pump.

Approval Holder:

Archergas Limited

Company Name

Archergas Limited

Address

85 Bayham Street, Camden Town

View All Listings by this Company

‘UPM10’ and ‘UPM20’ range of circulator pumps with a stainless-steel body, plastic impellor and EPDM ‘O’-rings. The product is supplied with EPDM gaskets for the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241207701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M) inlet/outlet.

Marking:

Grundfos and Grundfos logo, type and model on nameplate on motor housing. P/N no., P/C no., Serial (S/N) no., technical info, manufacturing country and data matrix on end of motor housing. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

UPM 10M 25-95 N 180, UPM 10L 25-105 N 180, UPM 10XL 25-125 N 180, UPM 20S 25-145 N 180. Where: Pump type: UPM 10M, UPM 10L, UPM 10XL, UPM 20S. Control variant: []: PWM, LIN: LIN bus input signal, 0-10V, AUTO, HYBRID, SOLAR, DHW. Nominal diameter: 25: G 1½”. Max. Head: 95: 9.5m, 105: 10.5m, 125: 12.5m, 145: 14.5m. Designation/Pump housing: N 180: Stainless steel body, 180mm port to port length. Control box orientation: 3: 3 o’clock (right), 6: 6 o’clock (below), 9: 9 o’clock (left). Customer code: XXX (no impact on water contact parts).

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Self-priming single stage pump, with stainless steel body, plastic impellers, stainless steel shaft, NBR 'O'-rings and seals. Maximum working pressure 6.0 bar. Maximum operating temperature 45°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241107701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F).

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model number, product/version number, technical information, serial number and manufacturing location on adhesive label on motor housing.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2029

Model:

99458789: JP 4-54 1X230V 50Hz 1,5M UK HU IE2.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of stainless steel or cast iron (with electrolytic coating) bodied, multistage centrifugal pumps with stainless steel impellers. Maximum working pressure: Ranges from 16.0 bar to 30.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251108701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Hydroo, model and product information on data plate fixed on pump bracket. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2030

Model:

VX1 Stainless steel Body – DIN Flange (2 to 40 stages) DN25 (PN25), VX3 Stainless steel Body – DIN Flange (2 to 31 stages) DN25 (PN25), VX5 Stainless steel Body – DIN Flange (2 to 33 stages) DN32 (PN25), VX10 Stainless steel Body – DIN Flange (1 to 22 stages) DN40 (PN25), VX15 Stainless steel Body – DIN Flange (1 to 18 stages) DN50 (PN25), VX20 Stainless steel Body – DIN Flange (1 to 17 stages) DN50 (PN25), VX32 Stainless steel Body – DIN Flange (1 to 16 stages) DN65 (PN30), VX45 Stainless steel Body – DIN Flange (1 to 13 stages) DN80 (PN30), VX65 Stainless steel Body – DIN Flange (1 to 8 stages) DN100 (PN25), VX1 Stainless steel Body – Oval Flange (2 to 26 stages) G1 (F) (PN16), VX3 Stainless steel Body – Oval Flange (2 to 20 stages) G1 (F) (PN16), VX5 Stainless steel Body – Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16), VX10 Stainless steel Body – Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16), VF1 Cast Iron Body – DIN Flange (2 to 40 stages) DN25 (PN25), VF3 Cast Iron Body – DIN Flange (2 to 31 stages) DN25 (PN25), VF5 Cast Iron Body – DIN Flange (2 to 33 stages) DN32 (PN25), VF10 Cast Iron Body – DIN Flange (1 to 22 stages) DN40 (PN25), VF15 Cast Iron Body – DIN Flange (1 to 18 stages) DN50 (PN25), VF20 Cast Iron Body – DIN Flange (1 to 17 stages) DN50 (PN25), VF32 Cast Iron Body – DIN Flange (1 to 16 stages) DN65 (PN30), VF45 Cast Iron Body – DIN Flange (1 to 13 stages) DN80 (PN30), VF65 Cast Iron Body – DIN Flange (1 to 8 stages) DN100 (PN25), VF1 Cast Iron Body – Oval Flange (2 to 26 stages) G1 (F) (PN16), VF3 Cast Iron Body – Oval Flange (2 to 20 stages) G1 (F) (PN16), VF5 Cast Iron Body – Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16), VF10 Cast Iron Body – Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16).

Approval Holder:

HYDROO PUMP INDUSTRIES S.L.

Company Name

HYDROO PUMP INDUSTRIES S.L.

Postcode

17843

Country

Spain

General Email

jordi.armengol@hydroo.com

View All Listings by this Company

FVC & FVS Ranges of stainless steel or cast iron (with electrolytic coating) bodied, multistage centrifugal pumps with stainless steel impellers. Maximum working pressure: Ranges from 16.0 bar to 30.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251108705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Zirantec logo, model and product information on data plate fixed on pump bracket. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2030

Model:

FVS 01 Stainless steel Body – DIN Flange (2 to 40 stages) DN25 (PN25) & Oval Flange (2 to 26 stages) G1 (F) (PN16). FVS 03 Stainless steel Body – DIN Flange (2 to 31 stages) DN25 (PN25) & Oval Flange (2 to 20 stages) G1 (F) (PN16). FVS 05 Stainless steel Body – DIN Flange (2 to 33 stages) DN32 (PN25) & Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16). FVS 10 Stainless steel Body – DIN Flange (1 to 22 stages) DN40 (PN25) & Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16). FVS 15 Stainless steel Body – DIN Flange (1 to 18 stages) DN50 (PN25), FVS 20 Stainless steel Body – DIN Flange (1 to 17 stages) DN50 (PN25), FVS 32 Stainless steel Body – DIN Flange (1 to 16 stages) DN65 (PN30), FVS 44 Stainless steel Body – DIN Flange (1 to 13 stages) DN80 (PN30), FVS 66 Stainless steel Body – DIN Flange (1 to 8 stages) DN100 (PN25), FVC 01 Cast Iron Body – DIN Flange (2 to 40 stages) DN25 (PN25) & Oval Flange (2 to 26 stages) G1 (F) (PN16). FVC 03 Cast Iron Body – DIN Flange (2 to 31 stages) DN25 (PN25) & Oval Flange (2 to 20 stages) G1 (F) (PN16). FVC 05 Cast Iron Body – DIN Flange (2 to 33 stages) DN32 (PN25) & Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16). FVC 10 Cast Iron Body – DIN Flange (1 to 22 stages) DN40 (PN25) & Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16). FVC 15 Cast Iron Body – DIN Flange (1 to 18 stages) DN50 (PN25), FVC 20 Cast Iron Body – DIN Flange (1 to 17 stages) DN50 (PN25), FVC 32 Cast Iron Body – DIN Flange (1 to 16 stages) DN65 (PN30), FVC 44 Cast Iron Body – DIN Flange (1 to 13 stages) DN80 (PN30), FVC 66 Cast Iron Body – DIN Flange (1 to 8 stages) DN100 (PN25),

Product Images

Approval Holder:

F.I.P.S Fabbrica Italiana Pompe Sommergibili SrL

Company Name

F.I.P.S Fabbrica Italiana Pompe Sommergibili SrL

Address

Via dell'Artigianato 16 20072 Pieve Emanuele, Milan

Country

Italy

Phone

0039 0249 708488

General Email

santosh@fips-pumps.it

View All Listings by this Company

Circulation pumps with either bronze or stainless pump bodies and a plastic impeller. Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

260104703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Ebara logo, model no., serial no. and technical information on data plate. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

EHW-B 25-4-130: 1” BSP (F), EHW-B 25-4-180: 1” BSP (F), EHW-B 25-5-130: 1” BSP (F), EHW-B 25-5-180: 1” BSP (F), EHW-B 25-6-130: 1” BSP (F), EHW-B 25-6-180: 1” BSP (F), EHW-B 25-7-180: 1” BSP (F), EHW-B 25-8-180: 1” BSP (F), EHW-B 25-12-180: 1” BSP (F), EHW-S 20-6-130: ¾” BSP (M), EHW-S 25-6-180: 1” BSP (F), EHW-S 25-7-180: 1” BSP (F), EHW-S 25-8-180: 1” BSP (F), EHW-S 32-8-180: 1¼” BSP (F). Where: B = Bronze body. S = Stainless steel body. 20/25/32 = DN size (mm). 4/5/6/7/8/12 = head (m). 130/180 = Pump body size (length from body inlet to outlet) (mm).

Approval Holder:

Ebara Corporation

Company Name

Ebara Corporation

Address

11-1 Haneda Asahi-cho Ota-ku, Tokyo 144-8510

Country

Japan

View All Listings by this Company

Range of circulating pumps, with plastic or stainless steel (cast EN 1.4308) bodies and a plastic impeller. Maximum working pressures: Stainless steel bodied pumps 10.0 bar, Plastic bodied pumps 3.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

260307701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R008 does not apply to the stainless-steel body models.

Size:

Composite (plastic body) (15 models): 1” BSP (M). Stainless steel body (25 models): 1½” BSP (M).

Marking:

Grundfos and Grundfos logo, type, model, production no. and other technical info on adhesive label on end of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/03/2031

Model:

Composite (plastic body): UPM2 15-** CIL2. Stainless steel body: UPM2 25-** N130, UPM2 25-** N180, UPML 25-** N180, UPMM 25-** N180, UPMXL 25-** N180. 130 or 180 (where applicable) = port to port length in mm. ** stands for the lifting height of the pump in dm, that can be various 2 or 3 digit numbers

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of shower heads and a shower handset. The shower heads have a stainless steel body and ball joint, silicon ‘O’-rings and nozzles, and the inlet incorporates a combined NBR washer and stainless steel filter. The shower handset has a stainless steel body, NBR ‘O’-rings and silicon nozzles. All products incorporate a plastic flow regulator on the inlet. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2106306

Note:

Open outlet use only.

Size:

QS5320xxx: ½” BSP (M). QS5100 & QS5110xxx: ½” BSP (F).

Marking:

QTOO (brand of D Line) on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2026

Model:

QS5100xxx - 200mm (overhead shower) QS5110xxx - 300mm (overhead shower) QS5320xxx (hand shower) Where xxx denotes the finish and can be replaced by 1 to 3 digits: M = brushed stainless steel finish. PP1 = polished PVD gunmetal finish.

Approval Holder:

D Line

Company Name

D Line

Address

Jylingevej 59, kld Copenhagen

Postcode

2720

Country

Denmark

Phone

+4572170138

General Email

rik@dline.com

View All Listings by this Company

Shower arm incorporating a stainless steel body. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2106329

Note:

Open outlet use only

Size:

½” BSP (M)

Marking:

Modular Products logo (MP) on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2026

Model:

MP1705

Approval Holder:

Modular Products Ltd

Company Name

Modular Products Ltd

Address

Unit 1 Modular Business Park Norton Road Stevenage

Postcode

SG1 2FZ

Country

United Kingdom

Phone

07852550494

General Email

steven.lai@modular-products.co.uk

View All Listings by this Company

Range of shower handsets and hoses with either a brass or stainless-steel body (various finishes). Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2112701

Note:

Open outlet use only.

Size:

½” BSP conical nut

Marking:

Vola on shower handset

Installation Requirements:

R001 R040

Expiry date:

31/12/2026

Model:

VOLA T60 XX - Stainless Steel. Where XX denotes surface finish and can be replaced with: 40 = Stainless Steel 61 = Brushed Black 64 = Brushed Copper 70 = Brushed Gold. VOLA T60 XX- Brass model Where XX denotes surface finish and can be replaced with: 02 = Grey 04 = Blue 05 = Orange 06 = Light Green 08 = Yellow 09 = Dark Grey 12 = Mocca 14 = Bright Red 15 = Dark Blue 16 = Chrome 17 = Gloss Black 18 = White 19 = Natural Brass 20 = Brushed Chrome 21 = Carmine Red 25 = Pink 27 = Matt Black 28 = Matt White 60 = Black B61 = Brushed Black 62 = Deep Black 63 = Copper B64 = Brushed Copper 65 = Gold 66 = Dark Gold 68 = Nickel B70 = Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of overhead shower outlets incorporating a stainless steel body (various finishes), strainer and flow regulator on the inlets. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2109374

Size:

½” BSP (M)

Marking:

Methven on body. DTC15 on inlet

Installation Requirements:

R001 R040

Expiry date:

30/09/2026

Model:

HEAH08XX HEAH09XX HEAH10XX HEAH11XX The ‘XX’ denotes the surface finish and is replaced by: CP = Chrome plated BK = Matte Black Plated GM = Gun Metal Plated BB = Brushed Brass Plated BK = Brushed Nickel Plated

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Wall outlet with a stainless steel body incorporating a shower handset holder. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240604024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only. This approval does not include a shower hose and handset.

Size:

½” BSP (M).

Marking:

Dolphin Solutions Limited on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

DB3073.x.xx - DOLPHIN BLUE FLEXI HOSE WALL OUTLET & HOLDER. The suffix .x in the above codes will be a number 1 - 5 to denote the finish: .1 to denote brushed/satin polished, .2 to denote mirror polished, .3 to denote brushed/satin polished with PVD coating, .4 to denote mirror polished with PVD coating .5 to denote powder coated. .6 - .9 to denote other material and finish options. For example, DB3073.1 is brushed/satin polished finish. The suffix .xx in above codes is only applicable where the previous suffix is 3 to 5. In this instance xx will be replaced by numbers 00-99 to denote the colour of PVD or powder coat. For example, DB3073.3.50 is brushed/satin polished with Gold PVD coating.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Wall mounted shower outlet comprising of a shower arm (brass body – various finishes) and an overhead shower (stainless steel body – various finishes) incorporating a stainless steel filter washer at the inlet. Maximum operating temperature: 85°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240688011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Bathroom Brands logo on body

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

HOX300x Where x denotes the finish and is replaced with: C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite, G- Gold & T- Slate

Approval Holder:

Bathroom Brands Group Ltd.

Company Name

Bathroom Brands Group Ltd.

Postcode

DA1 5FU

Country

United Kingdom

Phone

01322 475 739

General Email

David.Cheshire@bathroombrands.com

View All Listings by this Company

Overhead shower outlet with a stainless-steel body and EPDM seals. Maximum operating temperature: 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240804005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Wallgate on adhesive label on shower plate

Installation Requirements:

R001 R040

Expiry date:

31/08/2029

Model:

SNC-02

Approval Holder:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane, Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company