Range of central heating pumps incorporating polyether sulphone impellers, copper-tin alloy body, carbon graphite axial bearings and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
CM(E)(C) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. (CMEC models were added October 2023). The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Cast iron models: Maximum working pressure 10.0 bar. Cold water use only. Stainless steel models: Maximum working pressure 16.0 bar. Maximum operating temperature 60°C for self-priming models, 99°C for all other models.
Range of inline circulating pumps with bronze bodies, plastic impeller and EPDM rubber seals. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.
Wall mounted shower outlet (chromium plated brass) with EPDM and NBR rubber ‘O’-rings. Open Outlet use only. Maximum operating temperature 85 °C
Range of ceiling mounted shower arms with brass bodies (various finishes) having a threaded connection at the outlet and incorporating EPDM ‘O’-rings. Maximum operating temperature 60°C.
Shower kit consisting of a shower handset (matt black or chrome plated plastic), riser rail and PVC lined multi-layered shower hose with brass connections, EPDM 'O'-rings and strainer. Maximum operating temperature 60°C
Wall mounted shower set comprising of an inlet connection, shower handset, shower holder and EPDM lined shower hose. Maximum working pressure 5.0 bar. Maximum operating temperature 70⁰C
Range of shower arms having brass bodies (various finishes) incorporating a threaded connection at the outlet and EPDM ‘O’-rings. Maximum operating temperature 70°C.
Range of overhead shower outlets with stainless steel bodies (various finishes - see model). The inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 80°C.
Range of brass shower arms and plastic shower heads (various finishes) incorporating EPDM seals and ‘O’-rings, silicone seals and spray insert. The 26 469 xxx model is ceiling mounted & 26 470 xxx model is wall mounted. Both models incorporate a swivel joint housing a plastic flow regulator. Maximum operating temperature 60°C.
Range of interlocked EPDM lined shower hoses assemblies with EPDM gaskets. Maximum operating temperature is 85°C. bar.
Shower kit consisting of a shower handset (chrome plated plastic), riser rail and PVC lined multi-layered shower hose with brass connections, EPDM 'O'-rings and washers. Maximum operating temperature 60°C.
Range of shower handsets incorporating ABS bodies (chrome plated), EPDM seals and ‘O’-rings. Maximum operating temperature 65°C.
Range of overhead shower outlets with ABS bodies (chrome finish) and EPDM washers. Maximum operating temperature 70°C.
Ceiling mounted shower outlet consisting of a (chrome plated) brass shower arm and a (chrome plated) stainless steel shower rose with an integral ball joint and silicone nozzles . The connection between the shower arm and the ball joint incorporates a combined EPDM washer and stainless steel strainer. The connection between the ball joint and the overhead shower incorporates a plastic flow regulator. Maximum operating temperature 60°C.
Range of overhead shower outlets with brass bodies (various finishes), with a ball joint, EPDM ‘O’-rings and a NBR seal. The inlet incorporates a plastic flow regulator. Maximum operating temperature 60°C.
521 Range of pressure switches with stainless steel bodies (1.4305 / AISI 303 or 1.4404 / AISI 316L see model) and EPDM ‘O’-rings. Maximum working pressure range 0-60.0 bar (see model). Maximum operating temperature 99°C
Flow through valve (chromium plated brass) incorporating EPDM ‘O’-rings, PTFE seals, a drain valve, isolation valve and water mixing feature for connection to expansion vessels. Maximum working pressure 10.0 bar. Cold water use only.
Test Point incorporating a brass body and EPDM ‘O’-ring and seals. Maximum working pressure 20.0 bar. Maximum operating temperature 99°C.
Range of drain off taps incorporating DZR brass bodies, non-rising spindle operating mechanism and EPDM ‘O’-rings and seat washer. D340 range incorporates a lockshield mechanism and the D341 range incorporates a key operated mechanism. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Page 4 of 111
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
