Range of spout outlets incorporating stainless steel bodies (various finishes) and a plastic aerator. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2110305

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

QTOO (brand of D Line) on rosette.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

QA3080xxx Spout 115mm, rose 80mm, 45 degree. QA3090xxx Spout 115mm, rose 90mm, 45 degree. QA3180xxx Spout 190mm, rose 80mm. QA3190xxx Spout 190mm, rose 90mm. QA3280xxx Spout 250mm, rose 80mm. QA3290xxx Spout 250mm, rose 90mm. QA3380xxx Spout 191mm, rose 80mm, 45 degree. QA3390xxx Spout 191mm, rose 90mm, 45 degree. Where xxx denotes the surface finish (which is a non-water contact part). It can be 1 to 3 digits, which can be any combination of numbers and/or letters, as examples: M = brushed stainless steel finish, PP1 = polished PVD gunmetal finish.

Product Images

Approval Holder:

D Line

Company Name

D Line

Address

Jylingevej 59, kld Copenhagen

Postcode

2720

Country

Denmark

Phone

+4572170138

General Email

rik@dline.com

View All Listings by this Company

‘Quattroselect’ range of chemical dosing units incorporating a lockable self-closing trigger assembly and a self-closing bottle filler assembly which control the flow. The products are supplied with an approved double check valve assembly at the inlet (suitable for backflow prevention against fluid category 3). Maximum working pressure 5.8 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2110700

Size:

¾” BSP (M)

Marking:

Quattroselect on hose trigger. Diversey on label on door panel. Quattroselect on front panel. Other product info inside door panel.

Installation Requirements:

R001 R160 R040

Expiry date:

31/10/2026

Proviso:

Not suitable for use with chemicals greater than a fluid category 3 risk.

Model:

1219424 – QuattroSelect Pouch air gap CW 1219425 – QuattroSelect Pouch safe gap CW 1211418 – QuattroSelect Pouch air gap

Approval Holder:

Diversey Europe Operations BV.

Company Name

Diversey Europe Operations BV.

Address

De Boelelaan 32, 1083 HJ Amsterdam, Netherlands

View All Listings by this Company

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings. For use with stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011045

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139, 168mm. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F). DN50 to DN150 Flanged.

Marking:

Numepress, logo & size on body

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

F1 Coupling from 15 to 168.3 F2 Slip Coupling from 15 to 168.3 F3 90Q Female-Female Elbow from 15 to 168.3 F4 90Q Male - Female Elbow from 15 to 168.3 F5 45Q Female-Female Elbow from 15 to 168.3 F6 45Q Female - Male Elbow from 15 to 168.3 F7 Female Angle Adapter from 15 1/2" to 54 2" F8 Male Angle Adapter from 15 1/2" to 54 2" F9 Female Elbow with Wallnut from 15 1/2" to 22 3/4" Fl0 90Q Elbow with Plane Ends from 15 to 54 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" F12 Female tee threaded adaptor from 15 1/2" to 108 2" F14 Reducer from 18-15 to 168.3-139.7 F15 Reducing tee from 18-15 to 168.3-139.7 F16 Equal Tee from 15 to 168.3 F17 Female adaptor from 15 3/ 8" to 88.9 3" F18 M ale adaptor from 15 3/8" to 108 4" F19 Flanges adaptor from 15 DN15 to 108 DNlO0 F20 Pre-formed pipe bridge from 15 to 28 F21 Plug from 15 to 108 F22 Air tuve Pipe Bridge from 15 to 28 F23 Pipe Bridge from 15 to 28 F24 3 Pieces adaptor from 15 to 60.3 F25 Female -Female pipe bridge from 15 to 28 F26 Female connector from 15 1/2" to 54 2" F27 Male connector from 15 1/2" to 54 2" F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" F37 Male threaded cross from 15 1/2" to 108-4" F38 Female threaded cross from 15 1/ 2" to 108 4" F39 90Q Male angle adaptor from 15 3/8" to 54 2" F41 Male union connector gas from 15 1/ 2" to 54 2" F42 Female Union connector gas from 15 1/2" to 54 2" F43 Grooved Transition from 3/4" to 2" F44 Van Stone flange from 1/2" to 2" F45 Union Gas Female threaded from 15 3/4" to 54 2" F46 Straight union with press fitting on both ends from 15 to 54 F47 Half coupling from 15 to 168.3 F48 30Q Female-Female elbow from 15 to 108 F49 30Q Elbow with plain ends from 15 to 54 F50 15Q Female-female elbow from 15 to 108 F51 60Q Female-female elbow from 15 to 108 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 F53 Pipe penetration from 15 to 108 F54 Male plug from 16 to 168.3 F55 Weld Adaptor from 15 to 60.3 F56 75Q Female -Female elbow from 15 to 108 F57 l0Q Female-Female elbow from 15 to 108 F58 60Q Elbow with plain ends from 15 to 54 F59 lSQ Elbow with plain ends from 15 to 54 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 F63 7SQ Elbow with plain ends from 15 to 54 F64 15Q Male -female elbow from 15 to 108 F65 Male-Female pipe penetration from 15 to 108 F66 30Q Male-female elbow from 15 to 108 F72 45Q Elbow with plain ends from 15 to 54 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm rv,Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

Uponor S-Press (black and grey) composite fittings, Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples, Uponor RS fittings & Uponor S Press Metal Press fittings for use with for use with Uponor MLC pipe. Maximum working pressure and operating temperature: 10.0 bar@70°C Maximum working pressure and operating temperature: 16.0 bar @ Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101908

Size:

Uponor MLC Pipe (40 – 110mm) Uponor S-Press composite PPSU fittings (40 – 75mm) Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples 20, 25, 32mm Uponor RS Fittings (63 – 110mm) Uponor S-Press Metal Press fittings (40 -75mm)

Marking:

Uponor or U on fitting. Uponor MLCP and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

S-Press composite fittings PPSU 1046401 Uponor S-Press composite coupling PPSU 40-40 1046402 Uponor S-Press composite coupling PPSU 50-50 1032881 Uponor S-Press composite coupling PPSU 63-63 1032882 Uponor S-Press composite coupling PPSU 75-75 1046406 Uponor S-Press composite reducer PPSU 50-40 1032883 Uponor S-Press composite reducer PPSU 63-40 1032884 Uponor S-Press composite reducer PPSU 63-50 1032885 Uponor S-Press composite reducer PPSU 75-50 1032886 Uponor S-Press composite reducer PPSU 75-63 1046386 Uponor S-Press composite elbow PPSU 40-40 1046387 Uponor S-Press composite elbow PPSU 50-50 1032877 Uponor S-Press composite elbow PPSU 63-63 1032878 Uponor S-Press composite elbow PPSU 75-75 1046388 Uponor S-Press composite elbow 45° PPSU 40-40 1046389 Uponor S-Press composite elbow 45° PPSU 50-50 1032879 Uponor S-Press composite elbow 45° PPSU 63-63 1032880 Uponor S-Press composite elbow 45° PPSU 75-75 1046390 Uponor S-Press composite tee PPSU 40-40-40 1046391 Uponor S-Press composite tee PPSU 50-50-50 1032887 Uponor S-Press composite tee PPSU 63-63-63 1032888 Uponor S-Press composite tee PPSU 75-75-75 1046400 Uponor S-Press composite tee reducer PPSU 50-40-50 1032891 Uponor S-Press composite tee reducer PPSU 63-40-63 1032893 Uponor S-Press composite tee reducer PPSU 75-40-75 1032894 Uponor S-Press composite tee reducer PPSU 75-50-75 S-Press composite fittings PPSU (40, 50, 63 and 75 mm) with reducers design (nipples) of S-Press PLUS PPSU composite fittings 20, 25 and 32 mm 1039941 Uponor S-Press reducer PPSU 40-25 1039942 Uponor S-Press reducer PPSU 40-32 1039943 Uponor S-Press reducer PPSU 50-32 1039962 Uponor S-Press tee red. PPSU 40-20-40 1039963 Uponor S-Press tee red. PPSU 40-25-32 1039964 Uponor S-Press tee red. PPSU 40-25-40 1039965 Uponor S-Press tee red. PPSU 40-32-32 1039966 Uponor S-Press tee red. PPSU 40-32-40 1039967 Uponor S-Press tee red. PPSU 50-25-40 1039968 Uponor S-Press tee red. PPSU 50-25-50 1039969 Uponor S-Press tee red. PPSU 50-32-50 1032889 Uponor S-Press composite tee reducer PPSU 63-25-63 1032890 Uponor S-Press composite tee reducer PPSU 63-32-63 1032892 Uponor S-Press composite tee reducer PPSU 75-32-75 Uponor RS adapters (40-110 mm) and Uponor RS adapters (16, 20, 25, 32) 1029138 Uponor RS elbow RS2-RS2 1029139 Uponor RS elbow RS3-RS3 1029140 Uponor RS elbow 45° RS2-RS2 1029141 Uponor RS elbow 45° RS3-RS3 1029142 Uponor RS tee RS2-RS2-RS2 1029143 Uponor RS tee RS3-RS3-RS3 1059397 Uponor RS adapter S-Press 16-RS2 1095818 Uponor RS adapter S-Press PLUS 20-RS2 1095819 Uponor RS adapter S-Press PLUS 25-RS2 1095820 Uponor RS adapter S-Press PLUS 32-RS2 1046940 Uponor RS adapter S-Press 40-RS2 1046941 Uponor RS adapter S-Press 50-RS2 1029125 Uponor RS adapter S-Press 63-RS2 1029126 Uponor RS adapter S-Press 75-RS2 1029127 Uponor RS adapter S-Press 90-RS3 1029128 Uponor RS adapter S-Press 110-RS3 1059403 Uponor RS adapter female thread Rp1/2"FT-RS2 1059404 Uponor RS adapter female thread Rp1/2"FT-RS3 1029134 Uponor RS adapter female thread Rp1"FT-RS2 1029136 Uponor RS adapter female thread Rp2 1/2"FT-RS2 1029135 Uponor RS adapter female thread Rp2"FT-RS2 1029137 Uponor RS adapter female thread Rp3"FT-RS3 1059402 Uponor RS adapter male thread R1 1/2"MT-RS2 1029132 Uponor RS adapter male thread R2 1/2"MT-RS2 1029131 Uponor RS adapter male thread R2"MT-RS2 1029133 Uponor RS adapter male thread R3"MT-RS3 1029144 Uponor RS coupling RS2-RS2 1029145 Uponor RS coupling RS3-RS3 1029146 Uponor RS reducer RS3-RS2 1059399 Uponor RS flange adapter RS2-DN65 (PN16) 1029130 Uponor RS flange adapter RS3-DN100 (PN16) 1029129 Uponor RS flange adapter RS3-DN80 (PN16) 1046477 Uponor RS spacer RS2-RS2 l=130mm 1046750 Uponor RS spacer RS2-RS2 l=5mm 1046478 Uponor RS spacer RS3-RS3 l=210mm 1046751 Uponor RS spacer RS3-RS3 l=5mm Uponor S-Press fitting 40, 50, 63, 75 mm 1046932 Uponor S-Press coupling 40-40 1046935 Uponor S-Press coupling 50-50 1046934 Uponor S-Press reducer 50-40 1046908 Uponor S-Press elbow 40-40 1046911 Uponor S-Press elbow 50-50 1046913 Uponor S-Press elbow 45° 40-40 1046914 Uponor S-Press elbow 45° 50-50 1046921 Uponor S-Press tee 40-40-40 1046928 Uponor S-Press tee 50-50-50 1046904 Uponor S-Press adapter female thread 40-Rp1 1/2"FT 1046903 Uponor S-Press adapter female thread 40-Rp1 1/4"FT 1046907 Uponor S-Press adapter female thread 50-Rp1 1/2"FT 1046901 Uponor S-Press adapter male thread 40-R1 1/4"MT 1046902 Uponor S-Press adapter male thread 40-R1 1/2"MT 1046905 Uponor S-Press adapter male thread 50-R1 1/2"MT 1046906 Uponor S-Press adapter male thread 50-R2"MT 1032895 Uponor S-Press adapter male thread 63-R2"MT 1032896 Uponor S-Press adapter male thread 75-R2 1/2"MT 1046937 Uponor S-Press adapter swivel nut 40-G1 1/2"SN 1060094 Uponor S-Press adapter swivel nut 40-G1 1/4"SN 1060095 Uponor S-Press adapter swivel nut 50-G1 1/2"SN 1046938 Uponor S-Press adapter swivel nut 50-G1 3/4"SN 1046939 Uponor S-Press adapter swivel nut 50-G2"SN 1046910 Uponor S-Press elbow adap. female thread 40-Rp1 1/2"FT 1046912 Uponor S-Press elbow adap. female thread 50-Rp1 1/2"FT 1046909 Uponor S-Press elbow adapter male thread 40-R1 1/4"MT 1046922 Uponor S-Press tee adapter female thread 40-Rp1/2"FT-40 1046923 Uponor S-Press tee adapter female thread 40-Rp3/4"FT-40 1046929 Uponor S-Press tee adapter female thread 50-Rp1"FT-50

Product Images

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of Eco Duo copper press fittings with EPDM ‘O’-rings for use with Eco-Duo copper tube. The joints are achieved by means of a crimping tool. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010342

Size:

See model

Marking:

Water-Kinetic logo and QR on pipework and fitting sleeve.

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Eco-Duo Copper Pipe Outer: W1501CP 15mm - 3m length W1502CP 22mm - 3m length W1503CP 28mm - 3m length W1504CP 35mm - 3m length W1505CP 42mm – 3m length W1506CP 54mm – 3m length W1507CP 66.7mm – 3m length W1508CP 76.1mm – 3m length Eco-Duo 90 Degree Elbow: W1509CP for 15mm W1510CP for 22mm W1511CP for 28mm W1512CP for 35mm W1513CP for 42mm W1514CP for 54mm W1515CP for 66.7mm W1516CP for 76.1mm Eco-Duo 90 Degree Street Elbow: W1517CP for 15mm W1518CP for 22mm W1519CP for 28mm W1520CP for 35mm W1521CP for 42mm W1522CP for 54mm Eco-Duo Equal Tee: W1541CP for 15mm W1542CP for 22mm W1543CP for 28mm W1544CP for 35mm W1545CP for 42mm W1546CP for 54mm W1547CP for 66.7mm W1548CP for 76.1mm Eco-Duo Coupling Reducer: W1549CP for 22mm x 15mm W1550CP for 28mm x 22mm W1649CP for 28mm x 15mm W1650CP for 35mm x 28mm W1651CP for 42mm x 35mm W1652CP for 54mm x 42mm Eco-Duo Coupler Street Reducer: W1551CP for 28mm x 15mm W1552CP for 35mm x 22mm W1553CP for 35mm x 28mm W1554CP for 42mm x 22mm W1555CP for 42mm x 28mm W1556CP for 42mm x 35mm W1557CP for 54mm x 35mm W1558CP for 54mm x 42mm W1559CP for 66.7mm x 28mm W1560CP for 66.7mm x 35mm W1561CP for 66.7mm x 42mm W1562CP for 66.7mm x 54mm W1563CP for 76.1mm x 35mm W1564CP for 76.1mm x 42mm W1565CP for 76.1mm x 54mm W1566CP for 76.1mm x 66.7mm Eco-Duo Straight Coupling: W1567CP for 15mm W1568CP for 22mm W1569CP for 28mm W1570CP for 35mm W1571CP for 42mm W1572CP for 54mm W1573CP for 66.7mm W1574CP for 76.1mm Eco-Duo Copper Press Slip Coupler: W1584CP For 15mm W1585CP for 22mm W1586CP for 28mm W1587CP for 35mm W1588CP for 42mm W1589CP for 54mm W1590CP for 66.7mm W1591CP for 76.1mm Eco-Duo Tee Reduced Branch: W1594CP for 108x108x54 W1595CP for 108x108x66.7mm W1596CP for 108x108x76.1mm W1635CP for 22x22x15mm W1636CP for 28x28x15mm W1637CP 28x28x22mm W1638CP 35x35x15mm W1639CP 35x35x22mm W1640CP 35x35x28mm W1641CP for 42x42x15mm W1642CP for 42x42x22mm W1643CP for 42x42x28mm W1645CP for 54x54x22mm W1646CP for 54x54x28mm W1647CP for 54x54x35mm W1648CP for 54x54x42mm Eco-Duo Confluence Tee: W1575CP for 22mm W1576CP for 28mm W1577CP for 35mm W1578CP for 42mm W1579CP for 54mm W1580CP for 66.7mm W1581CP for 76.1mm

Product Images

Approval Holder:

Water-Kinetics

Company Name

Water-Kinetics

Address

Lomond House 7 Greenbank Road Darvel

Postcode

KA17 0NN

View All Listings by this Company

Manufacturer:

Water-Kinetics

Company Name

Water-Kinetics

Address

Lomond House 7 Greenbank Road Darvel

Postcode

KA17 0NN

View All Listings by this Company

Range of press fittings incorporating brass or PVDF bodies and EPDM ‘O’-rings. For use with Henco standard PE-Xc/AL/PE-Xc pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2105324

Size:

See model

Marking:

Henco & size on body. Henco, pressure, PE-XC/AL, and other technical information on pipe

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

1P-1414 ELBOW 90° 14X14 1P-1616 ELBOW 90° 16X16 1P-1818 ELBOW 90° 18X18 1P-2020 ELBOW 90° 20X20 1P-2626 ELBOW 90° 26X26 1P-3232 ELBOW 90° 32X32 2P-1604 BACKPLATE ELBOW FEMALE 16X1/2" 2P-1804 BACKPLATE ELBOW FEMALE 18X1/2 2P-2004 BACKPLATE ELBOW FEMALE 20X1/2 2P-2005 BACKPLATE ELBOW FEMALE 20X3/4 2P-2605 BACKPLATE ELBOW FEMALE 26X3/4 2P-1404K BACKPLATE ELBOW FEMALE SHORT MODEL 14X1/2 2P-1604K BACKPLATE ELBOW FEMALE SHORT MODEL16X1/2 3P-160416 DOUBLE BACKPLATE ELBOW FEMALE 16X1/2X16 3P-200420 DOUBLE BACKPLATE ELBOW FEMALE 20X1/2 X20' 3P-160416VK DOUBLE BACKPLATE ELBOW FEMALE 16X1/2X16 SHORT MODEL 3P-200420VK DOUBLE BACKPLATE ELBOW FEMALE 20X1/2X20 SHORT MODEL 5P-1404 BEND 90° MALE IRON ADAPTER 14X1/2 5P-1603 BEND 90° MALE IRON ADAPTER 16X3/8 5P-1604 BEND 90° MALE IRON ADAPTER 16X1/2 5P-1804 BEND 90° MALE IRON ADAPTER 18X1/2 5P-2004 BEND 90° MALE IRON ADAPTER 20X1/2 5P-2005 BEND 90° MALE IRON ADAPTER 20X3/4 5P-2605 BEND 90° MALE IRON ADAPTER 26X3/4 5P-3206 BEND 90° MALE IRON ADAPTER 32X1 6P-1404 BEND 90° FEMALE IRON ADAPTER 14X1/2 6P-1604 BEND 90° FEMALE IRON ADAPTER 16X1/2 6P-1804 BEND 90° FEMALE IRON ADAPTER 18X1/2 6P-2004 BEND 90° FEMALE IRON ADAPTER 20X1/2 6P-2005 BEND 90° FEMALE IRON ADAPTER 20X3/4 6P-2605 BEND 90° FEMALE IRON ADAPTER 26X3/4 8P-1604 WASHING MACHINE ADAPTER 16X1/2 9P-141414 T-PIECE 14X14X14 9P-161616 T-PIECE 16X16X16 9P-181818 T-PIECE 18X18X18 9P-202020 T-PIECE 20X20X20 9P-262626 T-PIECE 26X26X26 9P-323232 T-PIECE 32X32X32 10P-161416 T-REDUCED IRON CENTRE 16X14X16 10P-181618 T-REDUCED IRON CENTRE 18X16X18 10P-201620 T-REDUCED IRON CENTRE 20X16X20 10P-201820 T-REDUCED IRON CENTRE 20X18X20 10P-261626 T-REDUCED IRON CENTRE 26X16X26 10P-262026 T-REDUCED IRON CENTRE 26X20X26 10P-321632 T-REDUCED IRON CENTRE 32X16X32 10P-321832 T-REDUCED IRON CENTRE 32X18X32 10P-322032 T-REDUCED IRON CENTRE 32X20X32 10P-322632 T-REDUCED IRON CENTRE 32X26X32 11P-181616 T-BRANCH AND LINE REDUCED 18X16X16 11P-201616 T-BRANCH AND LINE REDUCED 20X16X16 11P-201818 T-BRANCH AND LINE REDUCED 20X18X18 11P-202016 T-BRANCH AND LINE REDUCED 20X20X16 11P-261620 T-BRANCH AND LINE REDUCED 26X16X20 11P-262020 T-BRANCH AND LINE REDUCED 26X20X20 11P-262616 T-BRANCH AND LINE REDUCED 26X26X16 11P-262620 T-BRANCH AND LINE REDUCED 26X26X20 11P-322026 T-BRANCH AND LINE REDUCED 32X20X26 11P-322626 T-BRANCH AND LINE REDUCED 32X26X26 12P-162016 T-ENLARGED BRANCH 16X20X16 12P-202620 T-ENLARGED BRANCH 20X26X20 12P-263226 T-ENLARGED BRANCH 26X32X26 13P-160416 T-WITH FEMALE IRON BRANCH 16X1/2 X16 13P-200420 T-WITH FEMALE IRON BRANCH 20X1/2 X20 13P-200520 T-WITH FEMALE IRON BRANCH 20X3/4 X20 13P-260426 T-WITH FEMALE IRON BRANCH 26X1/2 X26 13P-260526 T-WITH FEMALE IRON BRANCH 26X3/4 X26 13P-320532 T-WITH FEMALE IRON BRANCH 32X3/4 X32 13P-320632 T-WITH FEMALE IRON BRANCH 32X1 X32 13P-320732 T-WITH FEMALE IRON BRANCH 32X5/4 X32 14P-160416 T-WITH MALE IRON BRANCHE 16X1/2 X16 14P-200420 T-WITH MALE IRON BRANCHE 20X1/2 X20 14P-200520 T-WITH MALE IRON BRANCHE 20X3/4 X20 14P-260426 T-WITH MALE IRON BRANCHE 26X1/2 X26 14P-260526 T-WITH MALE IRON BRANCHE 26X3/4 X26 14P-260626 T-WITH MALE IRON BRANCHE 26X1 X26 14P-320532 T-WITH MALE IRON BRANCHE 32X3/4 X32 14P-320632 T-WITH MALE IRON BRANCHE 32X1 X32 15P-1414 STRAIGHT COUPLING 14X14 15P-1616 STRAIGHT COUPLING 16X16 15P-1717 STRAIGHT COUPLING 17X17 15P-1818 STRAIGHT COUPLING 18X18 15P-2020 STRAIGHT COUPLING 20X20 15P-2626 STRAIGHT COUPLING 26X26 15P-3232 STRAIGHT COUPLING 32X32 16P-1614 REDUCING COUPLING 16X14 16P-1816 REDUCING COUPLING 18X16 16P-2016 REDUCING COUPLING 20X16 16P-2018 REDUCING COUPLING 20X18 16P-2616 REDUCING COUPLING 26X16 16P-2620 REDUCING COUPLING 26X20 16P-3216 REDUCING COUPLING 32X16 16P-3220 REDUCING COUPLING 32X20 16P-3226 REDUCING COUPLING 32X26 17P-1403 STRAIGHT MALE IRON ADAPTER 14X3/8 17P-1404 STRAIGHT MALE IRON ADAPTER 14X1/2 17P-1603 STRAIGHT MALE IRON ADAPTER 16X3/8 17P-1604 STRAIGHT MALE IRON ADAPTER 16X1/2 17P-1604-CS STRAIGHT MALE IRON ADAPTER 16X1/2 17P-1605 STRAIGHT MALE IRON ADAPTER 16X3/4 17P-1804 STRAIGHT MALE IRON ADAPTER 18X1/2 17P-1805 STRAIGHT MALE IRON ADAPTER 18X3/4 17P-2004 STRAIGHT MALE IRON ADAPTER 20X1/2 17P-2004-CS STRAIGHT MALE IRON ADAPTER 20X1/2 17P-2005 STRAIGHT MALE IRON ADAPTER 20X3/4 17P-2005-CS STRAIGHT MALE IRON ADAPTER 20X3/4 17P-2605 STRAIGHT MALE IRON ADAPTER 26X3/4 17P-2605-CS STRAIGHT MALE IRON ADAPTER 26X3/4 17P-2606 STRAIGHT MALE IRON ADAPTER 26X1 17P-2606-CS STRAIGHT MALE IRON ADAPTER 26X1 17P-3206 STRAIGHT MALE IRON ADAPTER 32X1 17P-3207 STRAIGHT MALE IRON ADAPTER 32X5/4 18P-1404 STRAIGHT NIPPLE FEMALE 14X1/2 18P-1604 STRAIGHT NIPPLE FEMALE 16X1/2 18P-1804 STRAIGHT NIPPLE FEMALE 18X1/2 18P-1805 STRAIGHT NIPPLE FEMALE 18X3/4 18P-2004 STRAIGHT NIPPLE FEMALE 20X1/2 18P-2005 STRAIGHT NIPPLE FEMALE 20X3/4 18P-2605 STRAIGHT NIPPLE FEMALE 26X3/4 18P-2606 STRAIGHT NIPPLE FEMALE 26X1 18P-3206 STRAIGHT NIPPLE FEMALE 32X1 18P-3207 STRAIGHT NIPPLE FEMALE 32X5/4 19P-1405 PRESS-FIT ADAPTER TO EUROCONE 14X3/4 19P-1605 PRESS-FIT ADAPTER TO EUROCONE 16X3/4 19P-1805 PRESS-FIT ADAPTER TO EUROCONE 18X3/4 19P-2005 PRESS-FIT ADAPTER TO EUROCONE 20X3/4 27P-2626 45° BEND 26X26 27P-3232 45° BEND 32X32 28P-14041604-1 DOUBLE BACKPLATE ELBOW FEMALE,BUILD-UP 14X1/2 X16X1/2 28P-16041604-1 DOUBLE BACKPLATE ELBOW FEMALE,BUILD-UP 16X1/2 X16X1/2 33P-1605 NICKEL PLATED PR,-FIT ADAPT, TO EUROC. BENT 90° 16X3/4 36P-1612P PRESS-FIT ADAPTER TO COPPER PRESS 16X12 36P-1614P PRESS-FIT ADAPTER TO COPPER PRESS 16X14 36P-1615P PRESS-FIT ADAPTER TO COPPER PRESS 16X15 36P-1616P PRESS-FIT ADAPTER TO COPPER PRESS 16X16 36P-2015P PRESS-FIT ADAPTER TO COPPER PRESS 20X15 36P-2018P PRESS-FIT ADAPTER TO COPPER PRESS 20X18 36P-2022P PRESS-FIT ADAPTER TO COPPER PRESS 20X22 36P-2622P PRESS-FIT ADAPTER TO COPPER PRESS 26X22 36P-2628P PRESS-FIT ADAPTER TO COPPER PRESS 26X28 36P-3228P PRESS-FIT ADAPTER TO COPPER PRESS 32X28 1PK-1414 ELBOW 90° 14X14 1PK-1616 ELBOW 90° 16X16 1PK-1818 ELBOW 90° 18X18 1PK-2020 ELBOW 90° 20X20 1PK-2626 ELBOW 90° 26X26 1PK-3232 ELBOW 90° 32X32 1PK-4040 ELBOW 90° 40X40 1PK-5050 ELBOW 90° 50X50 1PK-6363 ELBOW 90° 63X63 2PK-1404BP BACKPLATE ELBOW FEMALE 14X1/2 2PK-1603 BACKPLATE ELBOW FEMALE 16X3/8 2PK-1604BP BACKPLATE ELBOW FEMALE 16X1/2 2PK-1604KBP BACKPLATE ELBOW FEMALE,SHORT MODEL 16X1/2 2PK-1804BP BACKPLATE ELBOW FEMALE 18X1/2 2PK-2004BP BACKPLATE ELBOW FEMALE 20X1/2 2PK-2005 BACKPLATE ELBOW FEMALE 20X3/4 2PK-2605 BACKPLATE ELBOW FEMALE 26X3/4 3PK-160416BP DOUBLE BACKPLATE ELBOW FEMALE,SHORT MODEL 16X1/2 X16 3PK-200420BP DOUBLE BACKPLATE ELBOW FEMALE,SHORT MODEL 20X1/2 X20 5PK-1404 BEND 90° MALE IRON ADAPTER 14X1/2 5PK-1604 BEND 90° MALE IRON ADAPTER 16X1/2 5PK-1804 BEND 90° MALE IRON ADAPTER 18X1/2 5PK-2004 BEND 90° MALE IRON ADAPTER 20X1/2 5PK-2005 BEND 90° MALE IRON ADAPTER 20X3/4 5PK-2605 BEND 90° MALE IRON ADAPTER 26X3/4 5PK-3206 BEND 90° MALE IRON ADAPTER 32X1 5PK-4007 BEND 90° MALE IRON ADAPTER 40X5/4 5PK-5007 BEND 90° MALE IRON ADAPTER 50X5/4 5PK-5008 BEND 90° MALE IRON ADAPTER 50X6/4 5PK-6310 BEND 90° MALE IRON ADAPTER 63X2 6PK-1404BP BEND 90° FEMALE IRON ADAPTER 14X1/2 6PK-1603 BEND 90° FEMALE IRON ADAPTER 16X3/8 6PK-1604BP BEND 90° FEMALE IRON ADAPTER 16X1/2 6PK-1804BP BEND 90° FEMALE IRON ADAPTER 18X1/2 6PK-2004BP BEND 90° FEMALE IRON ADAPTER 20X1/2 6PK-2005 BEND 90° FEMALE IRON ADAPTER 20X3/4 6PK-2605 BEND 90° FEMALE IRON ADAPTER 26X3/4 6PK-3206 BEND 90° FEMALE IRON ADAPTER 32X1 6PK-4007 BEND 90° FEMALE IRON ADAPTER 40X5/4 6PK-5007 BEND 90° FEMALE IRON ADAPTER 50X5/4 6PK-5008 BEND 90° FEMALE IRON ADAPTER 50X6/4 6PK-6310 BEND 90° FEMALE IRON ADAPTER 63 X 2 9PK-141414 T-PIECE 14X14X14 9PK-161616 T-PIECE 16X16X16 9PK-181818 T-PIECE 18X18X18 9PK-202020 T-PIECE 20X20X20 9PK-262626 T-PIECE 26X26X26 9PK-323232 T-PIECE 32X32X32 9PK-404040 T-PIECE 40X40X40 9PK-505050 T-PIECE 50X50X50 9PK-636363 T-PIECE 63X63X63 10PK-161416 T-REDUCED IRON CENTRE 16X14X16 10PK-181418 T-REDUCED IRON CENTRE 18X14X18 10PK-181618 T-REDUCED IRON CENTRE 18X16X18 10PK-201420 T-REDUCED IRON CENTRE 20X14X20 10PK-201620 T-REDUCED IRON CENTRE 20X16X20 10PK-201820 T-REDUCED IRON CENTRE 20X18X20 10PK-261626 T-REDUCED IRON CENTRE 26X16X26 10PK-261826 T-REDUCED IRON CENTRE 26X18X26 10PK-262026 T-REDUCED IRON CENTRE 26X20X26 10PK-321632 T-REDUCED IRON CENTRE 32X16X32 10PK-321832 T-REDUCED IRON CENTRE 26X18X26 10PK-322032 T-REDUCED CENTRE 32X20X32 10PK-322632 T-REDUCED CENTRE 32X26X32 10PK-401640 T-REDUCED IRON CENTRE 40X16X40 10PK-402040 T-REDUCED IRON CENTRE 40X20X40 10PK-402640 T-REDUCED IRON CENTRE 40X26X40 10PK-403240 T-REDUCED IRON CENTRE 40X32X40 10PK-502050 T-REDUCED IRON CENTRE 50X20X50 10PK-502650 T-REDUCED IRON CENTRE 50X26X50 10PK-503250 T-REDUCED IRON CENTRE 50X32X50 10PK-504050 T-REDUCED IRON CENTRE 50X40X50 10PK-632663 T-REDUCED IRON CENTRE 63X26X63 10PK-633263 T-REDUCED IRON CENTRE 63X32X63 10PK-634063 T-REDUCED IRON CENTRE 63X40X63 10PK-635063 T-REDUCED IRON CENTRE 63X50X63 11PK-161414 T-CENTRE AND LINE REDUCED 16X14X14 11PK-181616 T-CENTRE AND LINE REDUCED 18X16X16 11PK-201616 T-CENTRE AND LINE REDUCED 20X16X16 11PK-201818 T-CENTRE AND LINE REDUCED 20X18X18 11PK-202016 T-CENTRE AND LINE REDUCED 20X20X16 11PK-261616 T-CENTRE AND LINE REDUCED 26X16X16 11PK-261620 T-CENTRE AND LINE REDUCED 26X16X20 11PK-262016 T-CENTRE AND LINE REDUCED 26X20X16 11PK-262020 T-CENTRE AND LINE REDUCED 26X20X20 11PK-262616 T-CENTRE AND LINE REDUCED 26X26X16 11PK-262620 T-CENTRE AND LINE REDUCED 26X26X20 11PK-322026 T-CENTRE AND LINE REDUCED 32X20X26 11PK-322626 T-CENTRE AND LINE REDUCED 32X26X26 11PK-402032 T-CENTRE AND LINE REDUCED 40X20X32 11PK-402632 T-CENTRE AND LINE REDUCED 40X26X32 11PK-403232 T-CENTRE AND LINE REDUCED 40X32X32 11PK-404026 T-CENTRE AND LINE REDUCED 40X40X26 11PK-404032 T-CENTRE AND LINE REDUCED 40X40X32 11PK-502040 T-CENTRE AND LINE REDUCED 50X20X40 11PK-502640 T-CENTRE AND LINE REDUCED 50X26X40 11PK-503240 T-CENTRE AND LINE REDUCED 50X32X40 11PK-504040 T-CENTRE AND LINE REDUCED 50X40X40 12PK-161816 T-ENLARGED CENTRE 16X18X16 12PK-162016 T-ENLARGED CENTRE 16X20X16 12PK-202620 T-ENLARGED CENTRE 20X26X20 12PK-263226 T-ENLARGED CENTRE 26X32X26 12PK-324032 T-ENLARGED CENTRE 32X40X32 12PK-405040 T-ENLARGED CENTRE 40X50X40 13PK-160416BP T-FEMALE IRON CENTRE 16X1/2 X16 13PK-180418BP T-FEMALE IRON CENTRE 18X1/2 X18 13PK-200420BP T-FEMALE IRON CENTRE 20X1/2 20 13PK-200520 T-FEMALE CENTRE 20X3/4 X20 13PK-260420BP T-FEMALE IRON CENTRE 26X1/2 X20 13PK-260426BP T-FEMALE IRON CENTRE 26X1/2 X26 13PK-260526 T-FEMALE IRON CENTRE 26X3/4 X26 13PK-320532 T-FEMALE IRON CENTRE 32X3/4 X32 13PK-320632 T-FEMALE IRON CENTRE 32X4/4 X32 13PK-320732 T-FEMALE IRON CENTRE 32X5/4 X32 13PK-400540 T-FEMALE IRON CENTRE 40X3/4 X40 13PK-400640 T-FEMALE IRON CENTRE 40X4/4 X40 13PK-400740 T-FEMALE IRON CENTRE 40X5/4 X40 13PK-500550 T-FEMALE IRON CENTRE 50X3/4 X50 13PK-500850 T-FEMALE IRON CENTRE 50X6/4 X50 13PK-631063 T-FEMALE IRON CENTRE 63X2 X63 14PK-160416 T-MALE IRON CENTRE 16X1/2 X16 14PK-180418 T-MALE IRON CENTRE 18X1/2 X18 14PK-200420 T-MALE IRON CENTRE 20X1/2 X20 14PK-200520 T-MALE IRON CENTRE 20X3/4 X20 14PK-260426 T-MALE IRON CENTRE 26X1/2 X26 14PK-260526 T-MALE IRON CENTRE 26X3/4 X26 14PK-260626 T-MALE IRON CENTRE 26X1 X26 14PK-320532 T-MALE IRON CENTRE 32X3/4 X32 14PK-400640 T-MALE IRON CENTRE 40X1 X40 14PK-400740 T-MALE IRON CENTRE 40X5/4 X40 14PK-500850 T-MALE IRON CENTRE 50X6/4 X50 14PK-631063 T-MALE IRON CENTRE 63X2 X63 15PK-1414 STRAIGHT COUPLING 14X14 15PK-1616 STRAIGHT COUPLING 16X16 15PK-1818 STRAIGHT COUPLING 18X18 15PK-2020 STRAIGHT COUPLING 20X20 15PK-2626 STRAIGHT COUPLING 26X26 15PK-3232 STRAIGHT COUPLING 32X32 15PK-4040 STRAIGHT COUPLING 40X40 15PK-5050 STRAIGHT COUPLING 50X50 15PK-6363 STRAIGHT COUPLING 63X63 16PK-1614 REDUCING COUPLING 16X14 16PK-1814 REDUCING COUPLING 18X14 16PK-1816 REDUCING COUPLING 18X16 16PK-2014 REDUCING COUPLING 20X14 16PK-2016 REDUCING COUPLING 20X16 16PK-2018 REDUCING COUPLING 20X18 16PK-2616 REDUCING COUPLING 26X16 16PK-2618 REDUCING COUPLING 26X18 16PK-2620 REDUCING COUPLING 26X20 16PK-3216 REDUCING COUPLING 32X16 16PK-3220 REDUCING COUPLING 32X20 16PK-3226 REDUCING COUPLING 32X26 16PK-4026 REDUCING COUPLING 40X26 16PK-4032 REDUCING COUPLING 40X32 16PK-5032 REDUCING COUPLING 50X32 16PK-5040 REDUCING COUPLING 50X40 16PK-6340 REDUCING COUPLING 63X40 16PK-6350 REDUCING COUPLING 63X50 17PK-1404 STRAIGHT MALE IRON ADAPTER 14X1/2 17PK-1604 STRAIGHT MALE IRON ADAPTER 16X1/2 17PK-1804 STRAIGHT MALE IRON ADAPTER 18X1/2 17PK-1805 STRAIGHT MALE IRON ADAPTER 18X3/4 17PK-2004 STRAIGHT MALE IRON ADAPTER 20X1/2 17PK-2005 STRAIGHT MALE IRON ADAPTER 20X3/4 17PK-2605 STRAIGHT MALE IRON ADAPTER 26X3/4 17PK-2606 STRAIGHT MALE IRON ADAPTER 26X1 17PK-3206 STRAIGHT MALE IRON ADAPTER 32X1 17PK-3207 STRAIGHT MALE IRON ADAPTER 32X5/4 17PK-4006 STRAIGHT MALE IRON ADAPTER 40X1 17PK-4007 STRAIGHT MALE IRON ADAPTER 40X5/4 17PK-5008 STRAIGHT MALE IRON ADAPTER 50X6/4 17PK-6310 STRAIGHT MALE IRON ADAPTER 63X2 18PK-1404 STRAIGHT FEMALE IRON ADAPTER 14X1/2 18PK-1604 STRAIGHT FEMALE IRON ADAPTER 16X1/2 18PK-1804 STRAIGHT FEMALE IRON ADAPTER 18X1/2 18PK-1805 STRAIGHT FEMALE IRON ADAPTER 18X3/4 18PK-2004 STRAIGHT FEMALE IRON ADAPTER 20X1/2 18PK-2005 STRAIGHT FEMALE IRON ADAPTER 20X3/4 18PK-2605 STRAIGHT FEMALE IRON ADAPTER 26X3/4 18PK-2606 STRAIGHT FEMALE IRON ADAPTER 26X1 18PK-3206 STRAIGHT FEMALE IRON ADAPTER 32X1 18PK-3207 STRAIGHT FEMALE IRON ADAPTER 32X5/4 18PK-4006 STRAIGHT FEMALE IRON ADAPTER 40X1 18PK-4007 STRAIGHT FEMALE IRON ADAPTER 40X5/4 18PK-5008 STRAIGHT FEMALE IRON ADAPTER 50X6/4 18PK-6310 STRAIGHT FEMALE IRON ADAPTER 63X2 19PK-1605 PRESS FIT TO EUROCONE 16X3/4 19PK-2005 PRESS FIT TO EUROCONE 20X3/4 27PK-2626 45° BEND 26X26 27PK-3232 45° BEND 32X32 27PK-4040 45° BEND 40X40 27PK-5050 45° BEND 50X50 27PK-6363 45° BEND 63X63 28PK-2PK1604BP DOUBLE BACKPLATE 153MM CENTRS FOR ART. 2PK-1604 28PK-6PK1604BP DOUBLE BACKPLATE 153MM CENTRES FOR ART. 6PK-1604BP 8HNA-PK75 PRESSFITTING PK75-HN75

Approval Holder:

Henco Industries NV

Company Name

Henco Industries NV

Address

Toekomstlaan 27 HERENTALS

Postcode

2200

Country

Belgium

Phone

+3214285665

General Email

dirk.vroman@henco.be

View All Listings by this Company

Manufacturer:

Henco Industries NV

Company Name

Henco Industries NV

Address

Toekomstlaan 27 HERENTALS

Postcode

2200

Country

Belgium

Phone

+3214285665

General Email

dirk.vroman@henco.be

View All Listings by this Company

Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011331

Size:

See model.

Marking:

DOZ and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

EPH_WSP19_1646 15mm x G1/2” Elbow. EPH_WSP19_2610 15mm x G1/2” Elbow. EPH_WSP19_2611 15mm x G1/2” Elbow. EPH_WSP19_1642 15mm x R1/2” Straight. EPH_WSP19_1645 15mm x G1/2” Straight. EPH_WSP19_1643 22mm x G3/4” Straight.

Product Images

Approval Holder:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Manufacturer:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011363

Size:

See model.

Marking:

Flomasta and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

EPH_WSP19_1646 15mm x G1/2” Elbow. EPH_WSP19_2610 15mm x G1/2” Elbow. EPH_WSP19_2611 15mm x G1/2” Elbow. EPH_WSP19_1642 15mm x R1/2” Straight. EPH_WSP19_1645 15mm x G1/2” Straight. EPH_WSP19_1643 22mm x G3/4” Straight.

Approval Holder:

Kingfisher PLC

Company Name

Kingfisher PLC

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of brass compression fittings for use with copper pipe to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011314

Size:

½”, ¾” or 1” compression

Marking:

HM Pro on body. Heatmerchants Pro, size and technical information on nut.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

U47171, U47172, U47174, U47173, U47175, U47176, U47177, U47179, U47178, U47180, U47181, U47182, U47185, U47183, U47184, U47186, U47187, U47188, U47189, U47190, U47191, U47192, U47193, U47194, U47195, U47197, U47196, U47198, U47199, U47200, U47205, U47204, U47201, U47202, U47203, U47211, U47206, U47208, U47209, U47207, U47210, U47212, U47214, U47218, U47219, U47220, U47221, U47222, U47223

Product Images

Approval Holder:

Heat Merchants Group.

Company Name

Heat Merchants Group.

Postcode

CO WESTMEATH

View All Listings by this Company

Range of brass compression fittings for use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2103320

Size:

½”, ¾”, 1” compression. 8mm, 10mm, 12mm and 15mm compression.

Marking:

Irish insantantor, size and S (Sanbra Fyffe logo) on compression nut.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

‘Irish Instantor’ range. 306998 No 310 1/2" x 12mm Straight Coupler 306999 No 310 1/2" x 10mm Straight Coupler 307000 No 310 1/2" x 8mm Straight Coupler 307005 No 310 1/2" x 15mm Straight Coupler 310001 No 310 1/2" Straight Coupler C x C 310002 No 310 3/4" Straight Coupler C x C 310003 No 310 1" Straight Coupler C x C 310021 No 310 3/4" x 1/2" Straight Coupler C x C 310031 No 310 1" x 1/2" Straight Coupler C x C 310032 No 310 1" x 3/4" Straight Coupler C x C 311001 No 311 1/2" Straight Coupler MI x C 311002 No 311 3/4" Straight Coupler MI x C 311003 No 311 1" Straight Coupler MI x C 311012 No P311 1/2" x 3/4" Straight Coupler MI x C 311021 No 311 3/4" x 1/2" Straight Coupler MI x C 311023 No P311 3/4" x 1" Straight Coupler MI x C 311032 No 311 1" x 3/4" Straight Coupler MI x C 312001 No 312 1/2" Straight Coupler FI x C 312002 No 312 3/4" Straight Coupler FI x C 312003 No 312 1" Straight Coupler FI x C 312012 No P312 1/2" x 3/4" Straight Coupler FI x C 312021 No 312 3/4" x 1/2" Straight Coupler FI x C 312023 No P312 3/4" x 1" Straight Coupler FI x C 312032 No 312 1" x 3/4" Straight Coupler FI x C 315001 No 315 1/2" Elbow C x C 315002 No 315 3/4" Elbow C x C 315003 No 315 1" Elbow C x C 315021 No 315 3/4" x 1/2" Elbow C x C 315032 No 315 1" x 3/4" Elbow C x C 316001 No 316 1/2" Elbow MI x C 316002 No 316 3/4" Elbow MI x C 316003 No 316 1" Elbow MI x C 316012 No P316 1/2" x 3/4" Elbow MI x C 316021 No 316 3/4" x 1/2" Elbow MI x C 316023 No P316 3/4" x 1" Elbow MI x C 316032 No 316 1" x 3/4" Elbow MI x C 317001 No 317 1/2" Elbow FI x C 317002 No 317 3/4" Elbow FI x C 317003 No 317 1" Elbow FI x C 317012 No P317 1/2" x 3/4" Elbow FI x C 317021 No 317 3/4" x 1/2" Elbow FI x C 317023 No P317 3/4" x 1" Elbow FI x C 317032 No 317 1" x 3/4" Elbow FI x C 318001 No 318 1/2" Equal Tee 318002 No 318 3/4" Equal Tee 318112 No 318 1/2" x 1/2" x 3/4" Red Tee 318211 No 318 3/4" x 1/2" x 1/2" Red Tee 318212 No 318 3/4" x 1/2" x 3/4" Red Tee 318221 No 318 3/4" x 3/4" x 1/2" Red Tee 318223 No 318 3/4" x 3/4" x 1 Red Tee 318311 No 318 1" x 1/2" x 1/2" Red Tee 318312 No 318 1" x 1/2" x 3/4" Red Tee 318313 No 318 1" x 1/2" x 1 Red Tee 318321 No 318 1" x 3/4" x 1/2" Red Tee 318322 No 318 1" x 3/4" x 3/4" Red Tee 318323 No 318 1" x 3/4" x 1 Red Tee 318331 No 318 1" x 1" x 1/2" Red Tee 318332 No 318 1" x 1" x 3/4" Red Tee 319001 No 317W 1/2" Wallplate Elbow 320002 No 320 3/4" Boiler Tee MI x C X C 320003 No 320 1" Boiler Tee MI x C x C 320322 No 320 1" x 3/4" x 3/4" Boiler Tee MIxCxC 321001 No 321 1/2" Wallplate Elbow 321002 No 321 3/4" Wallplate Elbow 321012 No P321 1/2" x 3/4" Wallplate Elbow 321023 No P321 3/4" x 1" Wallplate Elbow 323001 No 323 1/2" Cross 323002 No 323 3/4" Cross 330001 No 330 1/2" Tee C x C x FI 330002 No 330 3/4" Tee C x C x FI 330003 No 330 1" Tee C x C x FI 330221 No 330 3/4" x 3/4" x 1/2" C x C x FI 330331 No 330 1" x 1" x 1/2" Tee C x C x FI 330332 No 330 1" x 1" x 3/4" Tee C x C x FI 351001 No 351 1/2" Stop End 351002 No 351 3/4" Stop End 351003 No 351 1" Stop End 378001 No 378A 1/2" Coupling Nut 378002 No 378A 3/4" Coupling Nut 378003 No 378A 1" Coupling Nut

Product Images

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company