Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2310157

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

Section:: 1000 Expansion Vessels
WRAS Approval Number:: 2310157
Note:: Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:: 2” or 2 ½” BSP (F)
Marking:: CORE, model, pressure, capacity and other technical information on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 31/10/2028
Model:: Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: CORE 1000 Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: CORE 750L

Approval Holder:: Smith Brothers Stores Limited

Company Name
Smith Brothers Stores Limited
Address
Unit V2 Winchester Avenue, Blaby, Leicester
Postcode
LE8 4GZ
Phone
0116 222 7330
General Email
kel.phillips@sbs.co.uk

View All Listings by this Company

WRAS Approval Number: #240904721

Filling loop assembly, incorporating a stainless-steel braided EPDM lined flexible hose assembly, an isolation valve (DZR brass body) and a combined isolation valve and non-verifiable double check valve assembly (DZR brass body) which incorporates 2 check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1015 Filling Loop
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm compression
Marking:: Justlink, WRAS and year of manufacture (YYYY) on crimp connection of flexible hose. Flow arrow, CR and size on body of combined isolation valve and double check valve. Flow arrow on isolation valve
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: JL-LTF-1

Approval Holder:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

WRAS Approval Number: #2205101

Range of medical sterilised water filter cartridges with plastic bodies and EPDM ‘O’-Rings. Models SMTFW-SLSS / SMTFD-SLSS incorporate a check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum Working Temperature: 50°C.

Section:: 1050 Filters and Housings
WRAS Approval Number:: 2205101
Note:: Open Outlet Use Only. Claims made by the manufacturer have not been tested and are not considered part of the approval listing.
Marking:: Spectrum on adhesive label on body.
Installation Requirements:: R001 R120 R150 R170
Expiry date:: 31/05/2027
Model:: SMSF-SLSS: Medical Shower Filter Sterilised Starter Set (Connection 1/2" BSP/NPT M) SMTFW-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) SMTFD-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT)

Approval Holder:: Spectrum

Company Name
Spectrum
Address
20/20 Business Park, Maidstone, Kent
Postcode
ME16 0LS
Country
United Kingdom
Phone
01622621940
General Email
jasmine@fileder.co.uk

View All Listings by this Company

WRAS Approval Number: #2107341

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2107341
Size:: See model
Marking:: Flowflex logo, WRAS & size on body.
Installation Requirements:: R001
Expiry date:: 31/07/2026
Model:: CU Press Equal Elbow 90 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Street Elbow 90 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Equal Elbow 45 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Street Elbow 45 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Crossover 15mm, 22mm, 28mm CU Press Street Crossover 15mm, 22mm, 28mm CU Press Street Coupling 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Equal Tee 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU PRESS REDUCED BRANCH TEE CU PRESS REDUCED END AND BRANCH TEE CU PRESS REDUCED END TEE 15x15x22mm;22x15x15mm;22x15x22mm 22x22x15mm;22x22x28mm;28x15x15mm 28x15x22mm;28x22x15mm;28x22x22mm 28x22x28mm;28x28x15mm;28x28x22mm 28x28x35mm;35x22x22mm;35x22x35mm 35x28x22mm;35x28x28mm;35x28x35mm 35x35x15mm;35x35x22mm;35x35x28mm 40x28x28mm;42x35x35mm;42x28x42mm 42x35x42mm;42x42x15mm;42x42x22mm 42X42X28mm;42X42X35mm;54X54X15mm 54X54X28mm;54X54X35mm;54X42X42mm 54X54X42mm CU PRESS FITTING REDUCER 22x15mm;28x15mm;28x22mm;35x15mm 35x22mm;35x28mm;42x15mm;42x22mm 42x28mm;42x35mm;54x15mm;54x22mm 54x28mm;54x35mm;54x42mm CU PRESS FITTING REDUCER 22x15mm;28x15mm;28x22mm;35x15mm 35x22mm;35x28mm;42x15mm;42x22mm 42x28mm;42x35mm;54x15mm;54x22mm 54x28mm;54x35mm;54x42mm CU PRESS STOP END 15mm, 22mm, 28mm, 35mm, 42mm, 54mm

Approval Holder:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #240404060

Range of PFD press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404060
Size:: see models
Marking:: PFD & size etched on body.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: 60111515 15mm Pressfit Coupler 60112222 22mm Pressfit Coupler 60112828 28mm Pressfit Coupler 60113535 35mm Pressfit Coupler 60114242 42mm Pressfit Coupler 60115454 54mm Pressfit Coupler 60171515 15mm Pressfit Slip Coupler 60172222 22mm Pressfit Slip Coupler 60172828 28mm Pressfit Slip Coupler 60173535 35mm Pressfit Slip Coupler 60174242 42mm Pressfit Slip Coupler 60175454 54mm Pressfit Slip Coupler 60411515 15mm Pressfit Elbow 60412222 22mm Pressfit Elbow 60412828 28mm Pressfit Elbow 60413535 35mm Pressfit Elbow 60414242 42mm Pressfit Elbow 60415454 54mm Pressfit Elbow 60431515 15mm Pressfit Street Elbow 60432222 22mm Pressfit Street Elbow 60432828 28mm Pressfit Street Elbow 60433535 35mm Pressfit Street Elbow 60434242 42mm Pressfit Street Elbow 60435454 54mm Pressfit Street Elbow 60451515 15mm Pressfit Obtuse Elbow 60452222 22mm Pressfit Obtuse Elbow 60452828 28mm Pressfit Obtuse Elbow 60453535 35mm Pressfit Obtuse Elbow 60454242 42mm Pressfit Obtuse Elbow 60455454 54mm Pressfit Obtuse Elbow 60481515 15mm Pressfit Obtuse Street Elbow 60482222 22mm Pressfit Obtuse Street Elbow 60482828 28mm Pressfit Obtuse Street Elbow 60483535 35mm Pressfit Obtuse Street Elbow 60484242 42mm Pressfit Obtuse Street Elbow 60485454 54mm Pressfit Obtuse Street Elbow 60132215 22 x 15mm Pressfit Fitting Reducing 60132815 28 x 15mm Pressfit Fitting Reducing 60132822 28 x 22mm Pressfit Fitting Reducing 60133515 35mm x 15mm Pressfit Fitting Reducing 60133522 35 x 22mm Pressfit Fitting Reducing 60133528 35 x 28mm Pressfit Fitting Reducing 60134215 42 x 15mm Pressfit Fitting Reducing 60134222 42 x 22mm Pressfit Fitting Reducing 60134228 42 x 28mm Pressfit Fitting Reducing 60134235 42 x 35mm Pressfit Fitting Reducing 60135415 54 x 15mm Pressfit Fitting Reducing 60135422 54 x 22mm Pressfit Fitting Reducing 60135428 54 x 28mm Pressfit Fitting Reducing 60135435 54 x 35mm Pressfit Fitting Reducing 60135442 54 x 42mm Pressfit Fitting Reducing 60151515 15x15x15 mm Pressfit Equal Tee 60222222 22x22x22 mm Pressfit Equal Tee 60282828 28x28x28 mm Pressfit Equal Tee 60353535 35x35x35 mm Pressfit Equal Tee 60424242 42x42x42 mm Pressfit Equal Tee 60545454 54x54x54 mm Pressfit Equal Tee 60222215 22x22x15 mm Pressfit Reducing Tee 60282815 28x28x15 mm Pressfit Reducing Tee 60282822 28x28x22 mm Pressfit Reducing Tee 60353515 35x35x15 mm Pressfit Reducing Tee 60353522 35x35x22 mm Pressfit Reducing Tee 60353528 35x35x28 mm Pressfit Reducing Tee 60424215 42x42x15 mm Pressfit Reducing Tee 60424222 42x42x22 mm Pressfit Reducing Tee 60424228 42x42x28 mm Pressfit Reducing Tee 60424235 42x42x35 mm Pressfit Reducing Tee 60545415 54x54x15 mm Pressfit Reducing Tee 60545422 54x54x22 mm Pressfit Reducing Tee 60545428 54x54x28 mm Pressfit Reducing Tee 60545435 54x54x35 mm Pressfit Reducing Tee 60545442 54x54x42 mm Pressfit Reducing Tee 60221522 22x15x22 mm Pressfit Reducing Tee 60221515 22x15x15 mm Pressfit Reducing Tee 60282222 28x22x22 mm Pressfit Reducing Tee 60282228 28x22x28 mm Pressfit Reducing Tee 60151522 15x15x22 mm Pressfit Reducing Tee 60811515 15mm Pressfit End Cap 60812222 22mm Pressfit End Cap 60812828 28mm Pressfit End Cap 60813535 35mm Pressfit End Cap 60814242 42mm Pressfit End Cap 60815454 54mm Pressfit End Cap 60112215 22 x 15mm Pressfit Reducing Coupler 60112815 28 x 15mm Pressfit Reducing Coupler 60112822 28 x 22mm Pressfit Reducing Coupler 60113515 35 x 15mm Pressfit Reducing Coupler 60113522 35 x 22mm Pressfit Reducing Coupler 60113528 35 x 28mm Pressfit Reducing Coupler 60114215 42 x 15mm Pressfit Reducing Coupler 60114222 42 x 22mm Pressfit Reducing Coupler 60114228 42 x 28mm Pressfit Reducing Coupler 60114235 42 x 35mm Pressfit Reducing Coupler 60115415 54 x 15mm Pressfit Reducing Coupler 60115422 55 x 22mm Pressfit Reducing Coupler 60115428 56 x 28mm Pressfit Reducing Coupler 60115435 54 x 35mm Pressfit Reducing Coupler 60115442 54 x 42mm Pressfit Reducing Coupler 60291515 15MM Pressfit Full Crossover 60292222 22MM Pressfit Full Crossover 60271515 15MM Pressfit Part Crossover 60272222 22MM Pressfit Part Crossover 60422215 22mm x 15mm Pressfit Reducing Elbow 60422815 28 x 15mm Pressfit Reducing Elbow 60422822 28mm x 22mm Pressfit Reducing Elbow

Approval Holder:: PressFit Direct Ltd.

Company Name
PressFit Direct Ltd.
Address
10 Aylesbury Court Lapworth
Postcode
B94 6BE

View All Listings by this Company