Directory Search Results

Print List

#2201016

Range of PVC-u solvent weld and threaded union fittings incorporating an EPDM ‘O’-ring. For use with PVC-u pipe manufactured to ISO 1452 and DIN 8063. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2201016
Note:
This approval does not include solvent cement.
Size:
See model.
Marking:
ERA® (registered trademark of Yonggao Co. Ltd.), size and PN on nut.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
Union UU001: 20mm-110mm Male Union UU002: 20mm-63mm x ¼”-2” BSP (F)
Product Images

Approval Holder:
ERA Piping (Zhejiang) Co.,Ltd.
Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
ERA Piping (Zhejiang) Co.,Ltd.
Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2201304

‘Xpress’ range of press fit fittings with copper or brass bodies and EPDM ‘O’-rings. For use with copper tube manufactured to EN1057. For above ground ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2201304
Size:
see model
Marking:
Brass fittings: Xpress and size on body. Copper fittings: Xpress, size and Kitemark logo on body.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
Code Sl/7270 Sl/72705 SlR/7240 56/7243 S12/7002A S12S/7001A S2/6270G S3/6243G S7/6246G S8/6280G Description Straight coupling Straight coupling slip pattern Straight reducing coupling Reducer Elbow Street elbow Straight female connector Straight male connector Female adaptor Male Adaptor Sizes 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -64mm 15mm -108mm 15mm -54mm 15mm-42mm Copper/ Copper Copper Copper Copper Copper Copper Gunmetal Gunmetal Gunmetal Gunmetal S11/6330 S13/6092G S14/6090G Union coupling Male elbow Female elbow 15mm -54mm 15mm -54mm 15mm -54mm Gunmetal Gunmetal Gunmetal S15/6472G Backplate elbow 15mm - 22mm Gunmetal SlFMF/7510 Composite female metric flange 67mm -108mm Copper SlFMM/7520 Composite female metric flange 67mm -108mm Copper S12R/7002A S15L/6472L Reducing Elbow Elbow 22mm x 15mm ½” and 3/4" Copper Gunmetal 519/7005 Bend 15mm-28mm Copper 521/7041 Obtuse Elbow 12mm-108mm Copper 5215/7040 Obtuse Street Elbow 12mm-108mm Copper 522/7086 Partial Crossover 15, 18 and 22mm Copper 5225/7087 Crossover 15, 18 and 22mm Copper 523/7085 Full Crossover 15, 18 and 22mm Copper 524/7130 Equal Tee 12mm-108mm Copper 525/7130 Tee Reducer Branch 15mm-108mm Copper 526/7130 Tee One End Reducer 15mm-35mm Copper 526/7130 Tee One End And Branch Reducer 15mm-54mm Copper 528/7130 S30/130G 560/7301 Tee Both Ends Reducer Female Branch Tee Stop End 12mm-28mm 12mm-108mm 35mm-54mm Copper Gunmetal Copper 561/7301 Stop End 12mm-108mm Copper S65F/6096G Elbow 12mm-54mm Gunmetal S68FF/6359 S69/6331G S69F/6330G Union Straight Male Union Connector Straight Female Union Connector 15mm-54mm 12mm-54mm 12mm-54mm Gunmetal Gunmetal Gunmetal
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2202701

‘Endex’ range of copper alloy and copper end feed fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2202701
Marking:
Endex (brand of Pegler Yorkshire Ltd.) and size on body
Installation Requirements:
R001
Expiry date:
28/02/2027
Model:
Endex range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 15mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 8mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm N12S STREET ELBOW: 10mm to 54mm N13 MALE ELBOW: 15mm x 1/2” to 28mm x 1” N14 FEMALE ELBOW: 15mm x ½” to 35mm x 1.1/4” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N18 SLOW BEND: 10mm to 54mm N18S SLOW STREET BEND: 10mm to 54mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 15mm to 54mm N22 PARTIAL CROSSOVER: 15mm to 22mm N23 FULL CROSSOVER: 15mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 15mm x 15mm x 10mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 18mm x 15mm x 18mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 15mm x 12mm x 12mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 10mm x 10mm x 12mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 22mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 28mm x 1” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2”

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2111030

Low profile mechanical seal intended for the internal repair of pipe joints. The system incorporates two stainless steel compression rings and an EPDM seal. For above and below ground use. Maximum working pressure 22.5 bar. Cold water use only.

Section:
1220 Fittings for use with Tube and Pipe
Section Subtitle:
Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.
WRAS Approval Number:
2111030
Size:
DN600
Marking:
Amex-10 printed on inside of seal and clamp.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
AMEX-10 SEAL
Product Images

Approval Holder:
Planned Maintenance (Pennine) Ltd
Company Name
Planned Maintenance (Pennine) Ltd
Address
Bentley Wood Way Burnley
Postcode
BB11 5ST

View All Listings by this Company

Print This Approval


#2111024

OMEG range of wall mounted, near-boiling water dispensers (cased and insulated). The products incorporate a solenoid valve which controls the flow, a stainless-steel tank, 3 or 5L (see model), and a plastic strainer at the inlet. Maximum supply pressure 10.0 bar. Cold water supply only. Maximum operating temperature 95˚C

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2111024
Size:
¾” BSP (M) inlet.
Marking:
HYCO on front of unit. HYCO & OMEG on technical label.
Installation Requirements:
R001 R040
Expiry date:
30/11/2026
Model:
OMEG3 and OMEG5
Product Images

Approval Holder:
Hyco Manufacturing Ltd
Company Name
Hyco Manufacturing Ltd
Address
California Drive, Castleford, West Yorkshire
Postcode
WF10 5QH

View All Listings by this Company

Print This Approval


#2112354

Range of gas fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The cold inlet incorporates an angled spherical valve with a brass body, chromium plated brass ball and a lever operating member. The primary circuit incorporates an expansion vessel, isolation valves on flow and return, drain valve and a pressure relief valve set at 3.0 bar. Maximum working pressure of the primary circuit is 2.5 bar. Maximum working pressure of the secondary circuit is 10.0 bar. Maximum operating temperature for the secondary circuit is 55˚C. Cold supply only.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2112354
Size:
Secondary: 15mm copper tail. Primary: 22mm copper tail.
Marking:
Biasi and Biasi logo on front panel. Biasi, Biasi logo, pressure, model and other technical information on label on inside cover.
Installation Requirements:
R001 R140 R360
Expiry date:
31/12/2026
Model:
Advance Plus 25C ERP, Advance Plus 30C ERP, Advance Plus 35C ERP, M300V.2025 SM, M300V.2530 SM, M300V.3035 SM, M275V.2024 SM, M275V.2428 SM, M275V.2832 SM.
Product Images

Approval Holder:
BSG Caldaie a gas S.p.A.
Company Name
BSG Caldaie a gas S.p.A.
Address
Via Pravolton 1/b Pordenone
Postcode
33170
Country
Italy
Phone
+39 0434 238311
General Email
luca_norio@bsgspa.it

View All Listings by this Company

Print This Approval


#2110331

Range of air cooled ice making machines . Inlet is controlled via solenoid valve. Maximum working pressure 5.5 bar. Cold water use only.

Section:
1500 Ice Making Machines
Size:
See model.
Marking:
Manitowoc logo on door. Manitowoc, model, serial number & technical information on body.
Installation Requirements:
R001 R009 R160 R171 R511
Expiry date:
31/10/2026
Model:
I(*)T0300A I(*)T0300W I(*)P0320A I(*)T0420A I(*)T0450A I(*)T0450W I(*)T0500A I(*)P0500A I(*)T0620A I(*)T0620W I(*)T0750A I(*)T0750W I(*)T0900A I(*)T0900W I(*)T1200A I(*)T1200W I(*)T1200N IBT1020C I(*)T1500A I(*)T1500W I(*)T1500N I(*)T1900A I(*)T1900N I indicates Indigo family of Ice Machines (*) Indicates D, Y or R. Dependent on ice cube size (T or P) Indicates refrigerant type (T=R410A, P=R290) 4 numerical characters indicate to icemaking capacity per 24hrs Final character indicates cooling option (A=Air, W=Water, N=Remote Condenser, C=Remote Condensing Unit)
Models added July 2024: I(*)P0300A I(*)P0420A I(*)P0620A I(*)P0620W I(*)P0600A I(*)P0600W I(*)P0900A I(*)P0900W I(*)P1200A I(*)P1200W I(*)P1200N I(*)P1500A I(*)P1500W I(*)P1500N I(*)P1900A I(*)P1900N
Product Images

Approval Holder:
Pentair Commercial Ice LLC
Company Name
Pentair Commercial Ice LLC
Address
5500 Wayzata Blvd. Suite 900 Golden Valley, MN
Postcode
55416
Country
United States
General Email
jeng.yang@pentair.com

View All Listings by this Company
Manufacturer:
Pentair Commercial Ice LLC
Company Name
Pentair Commercial Ice LLC
Address
5500 Wayzata Blvd. Suite 900 Golden Valley, MN
Postcode
55416
Country
United States
General Email
jeng.yang@pentair.com

View All Listings by this Company

Print This Approval


#2201024

Range of in-line water meters with brass bodies and plastic inlet filters. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C (SJ & ELECTO-SJ models) Maximum operating temperature 30°C (AP VARIO and AP RADIO models)

Section:
1505 Water Meters
Size:
DN15 - ¾” BSP (M) inlet and outlet. DN20 - 1” BSP (M) inlet and outlet.
Marking:
Maddalena logo on meter face or sealing ring. CE, year of manufacture (YYYY) and other technical information on meter face. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
SJ, SJ PLUS, SJ EVO, ELECTO SJ models (DN15, length of body 110, 115, 120, 130mm / DN20, length of body 115, 130mm). AP VARIO, AP RADIO models (DN15, length of body 80, 110, 130mm / DN20, length of body 130mm).
Product Images

Approval Holder:
Maddalena SpA
Company Name
Maddalena SpA
Address
via G.B. Maddalena 2/4 Povoletto (Udine)
Postcode
33040
Country
Italy
Phone
+39 0432 634811
General Email
emanuele.ferrari@maddalena.it

View All Listings by this Company
Manufacturer:
Maddalena SpA
Company Name
Maddalena SpA
Address
via G.B. Maddalena 2/4 Povoletto (Udine)
Postcode
33040
Country
Italy
Phone
+39 0432 634811
General Email
emanuele.ferrari@maddalena.it

View All Listings by this Company

Print This Approval


#2201344

Range of water meter manifolds (plastic body). Model WB31520CG incorporates a single check valve cartridge and model WB31520CGDCV two single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
¾” BSP (F)
Marking:
Talis on base. Flow arrow on manifold box.
Installation Requirements:
R001 R008
Expiry date:
31/01/2027
Model:
Talbot Matrix: WB31520CG WB31520CGDCV
Product Images

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#2111003

Thermally activated water saving valve with a plastic body and non-return valves on the hot and cold outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
1530 Miscellaneous Fittings
Size:
½” BSP (F)
Marking:
Advanced Water Save Ltd and WRAS on adhesive label on body.
Installation Requirements:
R001 R008 R150
Expiry date:
30/11/2026
Proviso:
Discharge to a storage vessel must be via a Type AA, AB or AD air gap or in accordance with EN 1717.
Model:
QA5 - Aquasaver

Approval Holder:
Advanced WaterSave Ltd.
Company Name
Advanced WaterSave Ltd.
Address
13 Glenburn Road, Wallasey, Merseyside
Postcode
CH44 6PY

View All Listings by this Company
Manufacturer:
Bibby Precision Engineering
Company Name
Bibby Precision Engineering
Address
Unit 4, Wirral International Business Park, Bromborough
Postcode
CH62 3RQ

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 292 of 1132

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.