Directory Search Results

Print List

#2209021

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2209021
Marking:
IDC logo (~E~ within a circle), size, PN, flow arrow and CR on body
Installation Requirements:
R001
Expiry date:
30/09/2027
Model:
ACV0030501 ½” BSP (F) inlet/outlet ACV0030402 ¾” BSP (F) inlet/outlet ACV0030701 1” BSP (F) inlet/outlet ACV0030601 1.1/4" BSP (F) inlet/outlet ACV0030801 1½” BSP (F) inlet/outlet ACV0030901 2” BSP (F) inlet/outlet
Product Images

Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Print This Approval


#2211812

‘Bubblestream’ range of tap outlet (stream shaper) adaptors incorporating a swivel mechanism and a stainless steel mesh aerator. All models, apart from 07.9870.0, are supplied with a M22 to M24 adaptor. All models, apart from 07.9870.0 & 07.9880.0, incorporate a plastic flow regulator. Maximum operating temperature 60°C.

Section:
0435 Taps and shower valves - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2211812
Note:
Open outlet use only Claims made by the manufacturer for flow rate have not been tested and are not considered part of the approval listing.
Size:
M22 or M24
Marking:
Bubble stream on swivel connector
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2027
Model:
07.9870.0 Bubblestream M22 (no flow reg) 07.9880.0 Bubblestream M22 or M24 (no flow reg) 07.9881.0 Bubblestream M22 or M24 8.0 lpm 07.9882.0 Bubblestream M22 or M24 7.0 lpm 07.9883.0 Bubblestream M22 or M24 6.0 lpm 07.9884.0 Bubblestream M22 or M24 5.0 lpm

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2212700

Range of deck mounted side valve with brass bodies and chrome trim sets. Models PDV030, PDV032, PDV067, PDV068 incorporate quarter turn ceramic disc headworks and models PDV029, PDV031 incorporate half turn ceramic disc headworks with various operating members (See models). Models PDV 031, PVD 032 and PVD 068 are supplied with metal back nuts. Models PDV 029, PDV 030 and PDV 067 are supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
2212700
Size:
See models
Marking:
PDV 029- Lefroy brooks on indice PDV 030- Lefroy brooks on indice PDV 031- Lefroy brooks on indice PDV 032- Lefroy brooks on indice PDV 067- Lefroy brooks lion logo on underside of operating member PDV 068- Lefroy brooks lion logo on underside of operating member
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
PDV 029- ½” BSP male inlet and outlet- With cross top operating members PDV 030- ½” BSP male inlet and outlet-With single lever operating members PDV 031- ¾” BSP male inlet and outlet-With cross top operating members PDV 032- ¾” BSP male inlet and outlet-With single lever operating members PDV 067- ½” BSP male inlet and outlet-With single lever operating members PDV 068- ¾” BSP male inlet and outlet-With single lever operating members

Approval Holder:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Unit 3 Marston Industrial Estate Marston Road Wolverhampton
Postcode
WV2 4LX
Country
United Kingdom
Phone
01902 390 891
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#2203376

Single-hole, single outlet (swivel) combination tap assembly with brass body (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2203376
Size:
Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Buster & Punch London on body
Installation Requirements:
R001 R010 R090
Expiry date:
31/03/2027
Model:
RKT-071664, RKT-351667, RKT-051665, RKT-591666, RKT-071660, RKT-361663, RKT-051661 & RKT-591662 COMBINATION TAP ASSEMBLIES
Product Images

Approval Holder:
Buster and Punch Ltd
Company Name
Buster and Punch Ltd
Address
29 St. Peters Street Stamford
Postcode
PE9 2PF

View All Listings by this Company

Print This Approval


#2207369

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates either a combined EPDM washer and stainless steel strainer with a plastic flow straightener, or an EPDM washer with a plastic aerator. The product is supplied with a click type waste, verified by test. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2207369
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
ebb + flo on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2027
Model:
62689 HEACHAM BASIN MIXER COMBINATION TAP ASSEMBLY

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 285 of 815

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.