Range of M profile brass press fittings with EPDM ‘O’-rings or gaskets to be used with copper pipe manufactured to EN1057 for above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240604008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Hailiang & size on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

EKYA00103 MALE CONNECTOR CXM - 15mmxR 1/2 EKYA00157 MALE CONNECTOR CXM - 15mmxR 3/4 EKYA00115 MALE CONNECTOR CXM - 22mmxR 1/2 EKYA00104 MALE CONNECTOR CXM - 22mmxR 3/4 EKYA00116 MALE CONNECTOR CXM - 22mmxR 1 EKYA00117 MALE CONNECTOR CXM - 28mmxR 3/4 EKYA00105 MALE CONNECTOR CXM - 28mmxR 1 EKYA00118 MALE CONNECTOR CXM - 35mmxR 1 EKYA00106 MALE CONNECTOR CXM - 35mmxR 1 1/4 EKYA00107 MALE CONNECTOR CXM - 42mmxR 1 1/2 EKYA00108 MALE CONNECTOR CXM - 54mmxR 2 EKYA00109 MALE CONNECTOR CXM - 66.7mmxR 2 1/2 EKYA00110 MALE CONNECTOR CXM - 76.1mmxR 2 1/2 EKYA00111 MALE CONNECTOR CXM - 76.1mmxR 3 EKYA00303 FEMALE CONNECTOR CXF - 15mmxRp 1/2 EKYA00357 FEMALE CONNECTOR CXF - 15mmxRp 3/4 EKYA00315 FEMALE CONNECTOR CXF - 22mmxRp 1/2 EKYA00304 FEMALE CONNECTOR CXF - 22mmxRp 3/4 EKYA00316 FEMALE CONNECTOR CXF - 22mmxRp 1 EKYA00317 FEMALE CONNECTOR CXF - 28mmxRp 3/4 EKYA00305 FEMALE CONNECTOR CXF - 28mmxRp 1 EKYA00318 FEMALE CONNECTOR CXF - 35mmxRp 1 EKYA00306 FEMALE CONNECTOR CXF - 35mmxRp 1 1/4 EKYA00307 FEMALE CONNECTOR CXF - 42mmxRp 1 1/2 EKYA00308 FEMALE CONNECTOR CXF - 54mmxRp 2 EKYA00309 FEMALE CONNECTOR CXF - 66.7mmxRp 2 1/2 EKYA00310 FEMALE CONNECTOR CXF - 76.1mmxRp 2 1/2 EKYA00311 FEMALE CONNECTOR CXF - 76.1mmxRp 3 EKYA10103 MALE ELBOW CXM - 15mmxR 1/2 EKYA10104 MALE ELBOW CXM - 22mmxR 3/4 EKYA10105 MALE ELBOW CXM - 28mmxR 1 EKYA10106 MALE ELBOW CXM - 35mmxR 1 1/4 EKYA10107 MALE ELBOW CXM - 42mmxR 1 1/2 EKYA10108 MALE ELBOW CXM - 54mmxR 2 EKYA10303 FEMALE ELBOW CXF - 15mmxRp 1/2 EKYA10304 FEMALE ELBOW CXF - 22mmxRp 3/4 EKYA10305 FEMALE ELBOW CXF - 28mmxRp 1 EKYA10306 FEMALE ELBOW CXF - 35mmxRp 1 1/4 EKYA10307 FEMALE ELBOW CXF - 42mmxRp 1 1/2 EKYA10308 FEMALE ELBOW CXF - 54mmxRp 2 EKYA10803 WALLPLATE ELBOW - 15mmxRp 1/2 EKYA10804 WALLPLATE ELBOW - 22mmxRp ¾ EKYA01003 UNION COUPLING CXC - 15mm EKYA01004 UNION COUPLING CXC - 22mm EKYA01005 UNION COUPLING CXC - 28mm EKYA01006 UNION COUPLING CXC - 35mm EKYA01007 UNION COUPLING CXC - 42mm EKYA01008 UNION COUPLING CXC - 54mm EKYA20303 FEMALE TEE CXCXF - 15mmx15mmxRp 1/2 EKYA20315 FEMALE TEE CXCXF - 22mmx22mmxRp 1/2 EKYA20304 FEMALE TEE CXCXF - 22mmx22mmxRp 3/4 EKYA20316 FEMALE TEE CXCXF - 28mmx28mmxRp 1/2 EKYA20317 FEMALE TEE CXCXF - 28mmx28mmxRp 3/4 EKYA20305 FEMALE TEE CXCXF - 28mmx28mmxRp 1 EKYA20318 FEMALE TEE CXCXF - 35mmx35mmxRp 1/2 EKYA20319 FEMALE TEE CXCXF - 35mmx35mmxRp 3/4 EKYA20320 FEMALE TEE CXCXF - 35mmx35mmxRp 1 EKYA20306 FEMALE TEE CXCXF - 35mmx35mmxRp 1 1/4 EKYA20321 FEMALE TEE CXCXF - 42mmx42mmxRp 1/2 EKYA20322 FEMALE TEE CXCXF - 42mmx42mmxRp 3/4 EKYA20323 FEMALE TEE CXCXF - 42mmx42mmxRp 1 EKYA20307 FEMALE TEE CXCXF - 42mmx42mmxRp 1 1/2 EKYA20324 FEMALE TEE CXCXF - 54mmx54mmxRp 1/2 EKYA20325 FEMALE TEE CXCXF - 54mmx54mmxRp 1 EKYA20308 FEMALE TEE CXCXF - 54mmx54mmxRp 2 EKYA01303 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 1/2 EKYA01357 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 3/4 EKYA01304 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 3/4 EKYA01315 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 1 EKYA01316 STRAIGHT SWIVEL CONNECTOR CXF - 28mmxG 1 1/4 EKYA01317 STRAIGHT SWIVEL CONNECTOR CXF - 35mmxG 1 1/2 EKYA01318 STRAIGHT SWIVEL CONNECTOR CXF - 42mmxG 2 EKYA01203 STRAIGHT MALE UNION CXM - 15mmxR 1/2 EKYA01257 STRAIGHT MALE UNION CXM - 15mmxR 3/4 EKYA01215 STRAIGHT MALE UNION CXM - 22mmxR 1/2 EKYA01204 STRAIGHT MALE UNION CXM - 22mmxR 3/4 EKYA01216 STRAIGHT MALE UNION CXM - 22mmxR 1 EKYA01217 STRAIGHT MALE UNION CXM - 28mmxR 3/4 EKYA01205 STRAIGHT MALE UNION CXM - 28mmxR 1 EKYA01206 STRAIGHT MALE UNION CXM - 35mmxR 1 1/4 EKYA01207 STRAIGHT MALE UNION CXM - 42mmxR 1 1/2 EKYA01208 STRAIGHT MALE UNION CXM - 54mmxR 2 EKYA01103 STRAIGHT FEMALE UNION CXF - 15mmxRp 1/2 EKYA01157 STRAIGHT FEMALE UNION CXF - 15mmxRp 3/4 EKYA01115 STRAIGHT FEMALE UNION CXF - 22mmxRp 1/2 EKYA01104 STRAIGHT FEMALE UNION CXF - 22mmxRp 3/4 EKYA01116 STRAIGHT FEMALE UNION CXF - 22mmxRp 1 EKYA01117 STRAIGHT FEMALE UNION CXF - 28mmxRp 3/4 EKYA01105 STRAIGHT FEMALE UNION CXF - 28mmxRp 1 EKYA01106 STRAIGHT FEMALE UNION CXF - 35mmxRp 1 1/4 EKYA01107 STRAIGHT FEMALE UNION CXF - 42mmxRp 1 1/2 EKYA01108 STRAIGHT FEMALE UNION CXF - 54mmxRp 2

Product Images

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of ‘Isiflo Sprint’ push fit fittings for use with PE100 pipe (manufactured in accordance with EN 12201), for above and below ground use. Isiflo Sprint Family fittings can be installed with seal liners, support liners and without any liner. Maximum working pressure 16 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240604032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Isiflo, size, flow arrow and date of manufacture (clock wheel)

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

8210052 Repkit IS 20mm (repair kit) 8210053 Repkit IS 25mm (repair kit) 8210054 Repkit IS 32mm (repair kit) 8210055 Repkit IS 40mm (repair kit) 8210056 Repkit IS 50mm (repair kit) 8210057 Repkit IS 63mm (repair kit) 8211002 100 20x20 IS Straight coupl 8211003 100 25x25 IS Straight coupl 8211004 100 32x32 IS Straight coupl 8211005 100 40x40 IS Straight coupl 8211006 100 50x50 IS Straight coupl 8211007 100 63x63 IS Straight coupl 8211020 102 63x32 IS Straight coupl 8211021 102 25x20 IS Straight coupl 8211022 102 32x25 IS Straight coupl 8211023 102 40x32 IS Straight coupl 8211024 102 50x40 IS Straight coupl 8211025 102 63x50 IS Straight coupl 8211026 102 32x20 IS Straight coupl 8211028 102 50x32 IS Straight coupl 8211053 105 25x1" IS Male coupl 8211054 105 32x1 1/4" IS Male coupl 8211055 105 40x1 1/2" IS Male coupl 8211056 105 50x2" IS Male coupl 8211058 105 32x1 1/2" IS Male coupl 8211059 105 32x2" IS Male coupl 8211102 110 20x1/2" IS Male coupl 8211103 110 25x3/4" IS Male coupl 8211104 110 32x1" IS Male coupl 8211105 110 40x1 1/4" IS Male coupl 8211106 110 50x1 1/2" IS Male coupl 8211107 110 63x2" IS Male coupl 8211124 112 32x3/4" IS Male coupl 8211125 112 40x1" IS Male coupl 8211126 112 50x1 1/4" IS Male coupl 8211128 112 32x1/2" IS Male coupl 8211153 115 25x1"IS Female coupl 8211154 115 32x1 1/4"IS Female coupl 8211160 116 50x1"IS Female coupl 8211161 116 40x1"IS Female coupl 8211162 116 20x1/2"IS Female coupl 8211163 116 25x3/4"IS Female coupl 8211164 116 32x1"IS Female coupl 8211165 116 40x1 1/4"IS Female coupl 8211166 116 50x1 1/2"IS Female coupl 8211167 116 63x2"IS Female coupl 8211169 116 32x3/4"IS Female coupl 8211202 120 20x20 IS Elbow 90° 8211203 120 25x25 IS Elbow 90° 8211204 120 32x32 IS Elbow 90° 8211205 120 40x40 IS Elbow 90° 8211206 120 50x50 IS Elbow 90° 8211207 120 63x63 IS Elbow 90° 8211212 121 20x1/2"IS Elbow male cou 8211213 121 25x3/4"IS Elbow male cou 8211214 121 32x1" IS Elbow Male coup 8211215 121 40x1 1/4"IS Elbow male 8211216 121 50x1 1/2"IS Elbow male 8211217 121 63x2"IS Elbow male coup 8211218 121 40x1 1/2"IS Elbow male 8211219 121 32x2" IS Elbow Male coup 8211220 122 25x1"IS Elbow FM 90° 8211221 122 32x1"IS Elbow FM 90° 8211223 122 25x3/4"IS Elbow FM 90° 8211224 122 32x1"IS Elbow FM 90° 8211225 122 40x1 1/4"IS Elbow FM 90° 8211226 122 50x1 1/2"IS Elbow FM 90° 8211227 122 63x2"IS Elbow FM 90° 8211228 122 50x1 1/2"IS Elbow FM 90° 8211229 122 25x3/4"IS Elbow FM 90° 8211234 123 32x32 IS Elbow45° 8211235 123 40x40 IS Elbow45° 8211236 123 50x50 IS Elbow45° 8211237 123 63x63 IS Elbow45° 8211245 124 40x1"IS Elbow Male90° 8211246 124 50x1 1/4"IS Elbow M 90° 8211252 125 20x20x20 IS Tee 8211253 125 25x25x25 IS Tee 8211254 125 32x32x32 IS Tee 8211255 125 40x40x40 IS Tee 8211256 125 50x50x50 IS Tee 8211257 125 63x63x63 IS Tee 8211323 132 25x3/4"x25 IS Tee 8211324 132 32x1"x32 IS Tee 8211325 132 40x1 1/4"x40 IS Tee 8211326 132 50x1 1/2"x50 IS Tee 8211328 132 63x2"x63 IS Tee 8211652 165 20 IS EndCap 8211653 165 25IS EndCap 8211654 165 32IS EndCap 8211655 165 40IS EndCap 8211656 165 50IS EndCap 8211657 165 63IS EndCap 8211802 180 20x2,0Støttehylse SDR11 8211803 180/181 25x2,3 Støttehylse S11 8211804 180 32x3,0Støttehylse SDR11 8211805 180 40x3,7Støttehylse SDR11 8211806 180 50x4,6Støttehylse SDR11 8211807 180 63x5,8Støttehylse SDR11 8211823 182 Seal Liner 25x2,3 8211824 182 Seal Liner 32x3,0 8211825 182 Seal Liner 40x3,7 8211826 182 Seal Liner 50x4,6 8211827 182 Seal Liner 63x5,8 8212293 229 25x25PE DoubleSwivel elbow 8212294 229 32x32PE DoubleSwivel elbow 8212295 229 40x40PE DoubleSwivel elbow 8212296 229 50x50PE DoubleSwivel elbow 8212297 229 63x63PE DoubleSwivel elbow 8216105 110 40x1 1/4"IS m/støttehylse 8216106 110 50x1 1/2"IS m/støttehylse 8216107 110 63x2"IS m/støttehylse 8011729 Muffe 1"R x 3/4"R kompositt 8011739 Muffe 11/2"G x 1"G kompositt 8011749 Muffe 2"Gx 1 1/2"G kompositt 8011516 Muffe 3/4"G kompositt 8011519 Muffe 1"G kompositt 8011523 Muffe 1 1/4"G kompositt 8011526 Muffe 1 1/2"G kompositt 8011533 Muffe 2"G kompositt 8211305 130 40x32x40 Tee

Product Images

Approval Holder:

Isiflo AS

Company Name

Isiflo AS

Address

Enggata 40 Postboks 143 2830 Raufoss Norway

View All Listings by this Company

Manufacturer:

Isiflo AS

Company Name

Isiflo AS

Address

Enggata 40 Postboks 143 2830 Raufoss Norway

View All Listings by this Company

Allpex range of end feed capillary fittings and brazing fittings for use with copper tube (manufactured to BS EN 1057). EG fittings have gunmetal bodies, ED fittings have DZR brass bodies & EB fittings have brass bodies. For above ground use only. Maximum working pressure: 6mm – 34mm 25Bar, 34mm -54mm 25Bar, 54mm – 108mm 16Bar, 108mm – 159mm 5 Bar. Maximum operating temperature 30°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240502052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model list

Marking:

1254, AL logo and size on body

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

EC10 – Straight Coupler CxC EC10 – 6mm EC10 – 8mm EC10 – 10mm EC10 –12mm EC10 –15mm EC10 –18mm EC10 –22mm EC10 –28mm EC10 –35mm EC10 –42mm EC10 –54mm EC10 –66.7mm EC10 –76.1mm EC10 –108mm EC10 –133mm EC10 –159mm EC10S – Slip Coupler without Stop EC10S –15mm EC10S –18mm EC10S –22mm EC10S –28mm EC10S –35mm EC10S –42mm EC10S –54mm EC10U -Straight Union CxC Copper Tail EC10U –15mm EC10U –22mm EC10U –28mm EC10U –35mm EC10U –42mm EC10U –54mm EC10X – Full Crossover CxC EC10X –10mm EC10X –12mm EC10X –15mm EC10X –18mm EC10X –22mm EC10XF – Part Crossover FTGxC EC10XF –10mm EC10XF –12mm EC10XF –15mm EC10XF –18mm EC10XF –22mm EC11 – Reducing Coupler CxC (Sizes EC11 - 108 = 10x8mm) EC11 –108 EC11 –128 EC11 –1210 EC11 –158 EC11 –1510 EC11 –1512 EC11 –1810 EC11 –1812 EC11 –1815 EC11 –2215 EC11 –2218 EC11 –2815 EC11 –2818 EC11 –2822 EC11 –3515 EC11 –3522 EC11 –3528 EC11 –4215 EC11 –4222 EC11 –4228 EC11 –4235 EC11 –5415 EC11 –5422 EC11 –5428 EC11 –5435 EC11 –5442 EC11 –5428 EC11 –5435 EC11 –5442 EC11 –6742 EC11 –6754 EC11 –7635 EC11 –7642 EC11 –7654 EC11 –7667 EC11 –10854 EC11 –10867 EC11 –10876 EC11F – Fitting Reducer FTG x C (Sizes EC11F – 86 = 8x6mm) EC11F –86 EC11F –106 EC11F –108 EC11F –128 EC11F –1210 EC11F –158 EC11F –1510 EC11F –1512 EC11F –1810 EC11F –812 EC11F –1815 EC11F –2212 EC11F –2215 EC11F –2218 EC11F –2815 EC11F –2818 EC11F –1822 EC11F –3515 EC11F –3518 EC11F –3522 EC11F –3528 EC11F –4215 EC11F –4218 EC11F –4222 EC11F –4228 EC11F –4235 EC11F –5415 EC11F –5418 EC11F –5422 EC11F –5428 EC11F –5435 EC11F –5442 EC11F –6728 EC11F –6735 EC11F –6742 EC11F –6754 EC11F –7635 EC11F –7642 EC11F –7654 EC11F –7667 EC11F –10842 EC11F –10854 EC11F –10867 EC11F –10876 EC11F –13367 EC11F – 13376 EC11F –133108 EC11F –15954 EC11F –15967 EC11F –15976 EC11F –159108 EC11F –159133 EC11FL – Long Fitting Reducer FTG x C (EC11FL – 158 = 15x8mm) EC11FL –158 EC11FL –1510 EC11FL –2215 EC11MI - Metric x Imperial Coupler C x C: EC11MI -15D – 15mmx1/2” EC11MI -22E – 22mmx3/4” EC11MI -28F – 28mmx1” EC11MI -35G – 35mmx11/4” EC12U – Straight male union C x MI (taper) cone joint, copper tail (boiler union): EC12U –15D - 15mmx1/2”BSP EC12U –22E – 22mmx ¾”BSP EC12U –22F – 22mmx1”BSP EC12U –28F – 28mmx1”BSP EC12U –35G – 35mmx11/4”BSP EC12U –42H – 42mmx11/2”BSP EC12U –54I – 54mmx2”BSP EC14U – Straight female union, C x FI cone joint, Copper tail: EC14U –15D – 15mmx1/2”BSP EC14U –22E – 22mmx ¾”BSP EC14U –28F – 28mmx1”BSP EC14U –35G – 35mmx11/4”BSP EC14U –42H – 42mmx11/2”BSP EC14U –54I – 54mmx2”BSP EC16 – Straight tep connector, C x FI (swivel) + Washer: EC16 –15D – 15mmx1/2”BSP EC16 –15E – 15mmx3/4”BSP EC16 –22E – 22mmx ¾”BSP EC16C – Cylinder Connector, C x FI (Swivel): EC16C –22F – 22mmx1”BSP EC16C –28F – 28mmx1”BSP EC16CF – Fitting Cylinder Connector, FTG x FI (Swivel): EC16CF –22F – 22mmx1”BSP EC16G – Gas meter union, C x FI (Swivel + Washer to BS746: EC16G –22E – 22mmx ¾”BSP EC16G –22F – 22mmx1”BSP EC16G –28F – 28mmx1”BSP EC17 – End Cap: EC17 – 6mm EC17 – 8mm EC17 – 10mm EC17 –12mm EC17 –15mm EC17 –18mm EC17 –22mm EC17 –28mm EC17 –35mm EC17 –42mm EC17 –54mm EC17 –66.7mm EC17 –76.1mm EC17 –108mm EC17 –133mm EC17 –159mm EC17A – Copper Airvent Cap, C x Cap Knurled cap air release: EC17A –15 - 15mm EC17A –22 – 22mm EC17AF - Copper Airvent Plug, Ftg x Cap Knurled cap air release: EC17AF –15 - 15mm EC20 – Elbow, C x C: EC20 – 6mm EC20 – 8mm EC20 – 10mm EC20 –12mm EC20 –15mm EC20 –18mm EC20 –22mm EC20 –28mm EC20 –35mm EC20 –42mm EC20 –54mm EC20 –66.7mm EC20 –76.1mm EC20 –108mm EC20 –133mm EC20 –159mm EC20F – Fitting (Street) Elbow, Ftg x C: EC20F – 10mm EC20F –12mm EC20F –15mm EC20F –18mm EC20F –22mm EC20F –28mm EC20F –35mm EC20F –42mm EC20F –54mm EC20F –66.7mm EC20F –76.1mm EC20F –108mm EC20FLS – Long Shank Fitting Elbow, Ftg (long) x C: EC20FLS –15mm EC20FLS –22mm EC20FLS –28mm EC20L – Long Radius Bend, C x C: EC20L – 10mm EC20L –12mm EC20L –15mm EC20L –18mm EC20L –22mm EC20L –28mm EC20L –35mm EC20L –42mm EC20L –54mm EC20L –66.7mm EC20L –76.1mm EC20L –108mm EC20L –133mm EC20L –159mm EC20LF- Long Radius Fitting Bend, Ftg x C: EC20LF – 10mm EC20LF –12mm EC20LF –15mm EC20LF –18mm EC20LF –22mm EC20LF –28mm EC20LF –35mm EC20LF –42mm EC20LF –54mm EC20LF –66.7mm EC20LF –76.1mm EC20LF –108mm EC25 – Obtuse Elbow (45/135 drg), C x C: EC25 – 10mm EC25–12mm EC25 –15mm EC25 –18mm EC25–22mm EC25 –28mm EC25 –35mm EC25 –42mm EC25 –54mm EC25 –66.7mm EC25 –76.1mm EC25 –108mm EC25 –133mm EC25 –159mm EC25F – Fitting Obtuse Elbow (45/135 drg), Ftg x C: EC25F – 10mm EC25F–12mm EC25F –15mm EC25F –18mm EC25F–22mm EC25F –28mm EC25F –35mm EC25F –42mm EC25F –54mm EC25F –66.7mm EC25F –76.1mm EC25F –108mm EC26 – Bent tap connector, C x Fi (swivel) + washer: EC26 –15D – 15mm x ½”BSP EC26 –15E – 15mm x ¾”BSP EC26 –22E – 22mm x ¾”BSP EC26C – Bent cylinder connector, C x Fi (swivel): EC26C –15E – 15mm x 3/4”BSP EC26C –22E – 22mm x ¾”BSP EC30 – Equal Tee, C x C x C: EC30 – 6mm EC30 – 8mm EC30 – 10mm EC30 –12mm EC30 –15mm EC30 –18mm EC30 –22mm EC30 –28mm EC30 –35mm EC30 –42mm EC30 –54mm EC30 –66.7mm EC30 –76.1mm EC30 –108mm EC30 –133mm EC30 –159mm EC31 – Reducing Tee, C x C x C (e.g. EC31 – 8810 – 8mm x 8mm x 10mm): EC31 –8810 EC31 –1088 EC31 –10810 EC31 –101012 EC31 –101015 EC31 –121010 EC31 –121012 EC31 –12128 EC31 –121210 EC31 –121215 EC31 –151010 EC31 –151015 EC31 –151212 EC31 –151215 EC31 –15158 EC31 –151510 EC31 –151512 EC31 –151518 EC31 –151522 EC31 –181515 EC31 –181518 EC31 –181812 EC31 –181815 EC31 –181822 EC31 –221515 EC31 –221522 EC31 –222210 EC31 –222215 EC31 –222218 EC31 –222228 EC31 –222235 EC31 –281515 EC31 –281522 EC31 –281528 EC31 –282215 EC31 –282222 EC31 –282228 EC31 –282815 EC31 –282822 EC31 –282835 EC31 –351535 EC31 –352222 EC31 –352235 EC31 –352822 EC31 –352828 EC31 –352835 EC31 –353515 EC31 –353522 EC31 –353528 EC31 –353542 EC31 –422242 EC31 –422828 EC31 –422842 EC31 –423535 EC31 –423542 EC31 –424215 EC31 –424222 EC31 –424228 EC31 –424235 EC31 –424254 EC31 –543535 EC31 –543554 EC31 –544242 EC31 –544254 EC31 –545415 EC31 –545422 EC31 –545428 EC31 –545435 EC31 –545442 EC31 –674267 EC31 –675467 EC31 –676728 EC31 –676735 EC31 –676742 EC31 –676754 EC31 –765476 EC31 –766776 EC31 –767642 EC31 –767654 EC31 –767667 EC31 –10810854 EC31 –10810867 EC31 –10810876 EC31 –13313367 EC31 –13313376 EC31 –133133108 EC31 –15915976 EC31 –159159108 EC31 –159159133 EB14 – Female Coupler, C x Fi: EB14 –8B – 8mm x ¼”BSP(F) EB14 –10B – 10mm x ¼”BSP(F) EB14 –10C – 10mm x 3/8”BSP(F) EB14 –12B – 12mm x ¼”BSP(F) EB14 –12C – 12mm x 3/8”BSP(F) EB14 –15B – 15mm x ¼”BSP(F) EB10M – Brass Manifold (e.g EB10m-22102 – 22mm x 10-2 mm): EB10M –22102 EB10M –22103 EB10M –22104 EB10M –2282 EB10M –2283 EB10M –2284 EB10P – Manifold Plug: EB10P – 108 – 10mm x 8mm EB11F2 – 2 in 1 Fitting reducer, Ftg x C: EB11F2 –15108 – 15mm x 10-8mm EG12 – Straight male coupler, C x Mi (taper): EG12 –15C – 15mm x 3/8”BSP (M) EG12 –15D – 15mm x 1/2”BSP (M) EG12 –15E – 15mm x 3/4”BSP (M) EG12 –22E – 22mm x ¾”BSP(M) EG12 –28F – 28mm x 1”BSP(M) EG12 –35G – 35mm x 11/4”BSP(M) EG12 –42H – 42mm x 11/2”BSP(M) EG12 –54I – 54mm x 2”BSP(M) EG12 –67J – 67mm x 21/2”BSP (M) EG12 –76K – 76.1mm x 3”BSP (M) EG12 –108L – 108 x 4”BSP(M) EG14 – Straight Female Coupler C x Fi: EG14 –15C – 15mm x 3/8”BSP (M) EG14 –15D – 15mm x 1/2”BSP (M) EG14 –15E – 15mm x 3/4”BSP (M) EG14 –22E – 22mm x ¾”BSP(M) EG14 –28F – 28mm x 1”BSP(M) EG14 –35G – 35mm x 11/4”BSP(M) EG14 –42H – 42mm x 11/2”BSP(M) EG14 –54I – 54mm x 2”BSP(M) EG14 –67J – 67mm x 21/2”BSP (M) EG14 –76K – 76.1mm x 3”BSP (M) EG14 –108L – 108 x 4”BSP(M) EB12 – Straight male coupler, C x MI (taper): EB12 –8B – 8mm x ¼”BSP(M) EB12 –10B – 10mm x ¼”BSP (M) EB12 –10C – 10mm x 3/8”BSP (M) EB12 –12B – 12mm x ¼”BSP(M) EB12 –12C – 12mm x 3/8”BSP (M) EB12 –15B – 15mm x ¼”BSP(M) EB12F – Male Stub adaptor Ftg x MI (taper): EB12F –8B – 8mm x ¼”BSP(M) EB12F –10B – 10mm x ¼”BSP (M) EB12F –10C – 10mm x 3/8”BSP (M) EB12F –12B – 12mm x ¼”BSP(M) EB12F –12C – 12mm x 3/8”BSP (M) EB12F –15B – 15mm x ¼”BSP(M) EB17A – Brass Airvent cap, C x Cap: EB17A –15mm EB17A –22mm EB17AF – Brass Airvent Plug, Ftg x Cap: EB17AF –15mm

Product Images

Approval Holder:

Allpex Ltd.

Company Name

Allpex Ltd.

Address

261 Water Road, Abbeydale Industrial Estate, Wembley Middlesex

Postcode

HA0 1HX

Country

United Kingdom

Phone

00 44 208 810 4546

General Email

product@allpex.com

View All Listings by this Company

Range of copper end feed solder fittings for use with copper tube (EN1057). For above and below ground use. Maximum working pressure for sizes 8mm to 54mm is 25.0 bar. Maximum working pressure for sizes above 54mm is 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309080

Size:

See models

Marking:

Brymec logo & size on fitting body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

15 30014 COUPLER 22 30015 COUPLER 28 30016 COUPLER 35 30017 COUPLER 42 30018 COUPLER 54 30019 COUPLER 67 30020 COUPLER 76 30021 COUPLER 108 30022 COUPLER 22 x 15 30122 REDUCING COUPLING 28 x 22 30123 REDUCING COUPLING 28 x 15 30116 REDUCING COUPLING 35 x 22 30118 REDUCING COUPLING 35 x 28 30124 REDUCING COUPLING 42 x 22 30125 REDUCING COUPLING 42 x 28 30126 REDUCING COUPLING 42 x 35 30127 REDUCING COUPLING 54 x 35 30128 REDUCING COUPLING 54 x 42 30132 REDUCING COUPLING 15 x 10 30095 FITTING REDUCER 22 x 15 30097 FITTING REDUCER 28 x 15 30098 FITTING REDUCER 28 x 22 30099 FITTING REDUCER 35 x 15 30100 FITTING REDUCER 35 x 22 30101 FITTING REDUCER 35 x 28 30102 FITTING REDUCER 42 x 15 30107 FITTING REDUCER 42 x 22 30108 FITTING REDUCER 42 x 28 30103 FITTING REDUCER 42 x 35 30104 FITTING REDUCER 54 x 15 30109 FITTING REDUCER 54 x 22 30110 FITTING REDUCER 54 x 28 30111 FITTING REDUCER 54 x 35 30105 FITTING REDUCER 54 x 42 30106 FITTING REDUCER 67 x 28 30023 FITTING REDUCER 67 x 35 30024 FITTING REDUCER 67 x 42 30025 FITTING REDUCER 67 x 54 30114 FITTING REDUCER 76 x 35 30026 FITTING REDUCER 76 x 42 30027 FITTING REDUCER 76 x 54 30088 FI TTING REDUCER 76 x 67 30089 FITTING REDUCER 108 x 54 30091 FITTING REDUCER 15 30030 90° ELBOW 22 30031 90° ELBOW 28 30032 90° ELBOW 35 30033 90° ELBOW 42 30034 90° ELBOW 54 30035 90° ELBOW 67 30036 90° ELBOW 76 30037 90° ELBOW 108 30038 90° ELBOW 15 30129 90° STREET ELBOW 22 30130 90° STREET ELBOW 28 30131 90° STREET ELBOW 35 30133 90° STREET ELBOW 42 30134 90° STREET ELBOW 54 30135 90° STREET ELBOW 15 30063 45° ELBOW 22 30064 45° ELBOW 28 30065 45° ELBOW 35 30066 45° ELBOW 42 30067 45° ELBOW 54 30068 45° ELBOW 67 30069 45° ELBOW 76 30070 45° ELBOW 108 30071 45° ELBOW 15 30144 45° STREET ELBOW 22 30145 45° STREET ELBOW 28 30146 45° STREET ELBOW 35 30147 45° STREET ELBOW 42 30148 45° STREET ELBOW 54 30149 45° STREET ELBOW 15 30275 SLIP COUPLING 22 30276 SLIP COUPLING 28 30277 SLIP COUPLING 35 30278 SLIP COUPLING 42 30279 SLIP COUPLING 54 30280 SLIP COUPLING 15 x ½” 30152 IMPERIAL TO METRIC COUPLER 22 x ¾” 30153 IMPERIAL TO METRIC COUPLER 28 x 1” 30154 IMPERIAL TO METRIC COUPLER 15 30047 EQUAL TEE 22 30048 EQUAL TEE 28 30049 EQUAL TEE 35 30050 EQUAL TEE 42 30051 EQUAL TEE 54 30052 EQUAL TEE 67 30053 EQUAL TEE 76 30054 EQUAL TEE 108 30055 EQUAL TEE 22 x 22 x 15 30207 REDUCING TEE 28 x 28 x 15 30211 REDUCING TEE 28 x 28 x 22 30212 REDUCING TEE 35 x 35 x 15 30223 REDUCING TEE 35 x 35 x 22 30213 REDUCING TEE 35 x 35 x 28 30229 REDUCING TEE 42 x 42 x 15 30242 REDUCING TEE 42 x 42 x 22 30214 REDUCING TEE 42 x 42 x 28 30243 REDUCING TEE 42 x 42 x 35 30215 REDUCING TEE 54 x 54 x 15 30253 REDUCING TEE 54 x 54 x 22 30254 REDUCING TEE 54 x 54 x 28 30246 REDUCING TEE 54 x 54 x 35 30216 REDUCING TEE 54 x 54 x 42 30217 REDUCING TEE 67 x 67 x 28 30248 REDUCING TEE 67 x 67 x 35 30255 REDUCING TEE 67 x 67 x 42 30256 REDUCING TEE 67 x 67 x 54 30218 REDUCING TEE 76 x 76 x 28 30257 REDUCING TEE 76 x 76 x 35 30262 REDUCING TEE 76 x 76 x 42 30263 REDUCING TEE 76 x 76 x 54 30264 REDUCING TEE 76 x 76 x 67 30265 REDUCING TEE 108 x 108 x 54 30271 REDUCING TEE 108 x 108 x 67 30272 REDUCING TEE 108 x 108 x 76 30273 REDUCING TEE 22 x 15 x 15 30205 REDUCING TEE 22 x 15 x 22 30206 REDUCING TEE 28 x 15 x 15 30198 REDUCING TEE 28 x 15 x 22 30219 REDUCING TEE 28 x 15 x 28 30209 REDUCING TEE 28 x 22 x 15 30220 REDUCING TEE 28 x 22 x 22 30208 REDUCING TEE 28 x 22 x 28 30210 REDUCING TEE 35 x 22 x 22 30225 REDUCING TEE 35 x 22 x 35 30228 REDUCING TEE 35 x 28 x 22 30226 REDUCING TEE 35 x 28 x 28 30227 REDUCING TEE 35 x 28 x 35 30232 REDUCING TEE 42 x 28 x 28 30235 REDUCING TEE 54 x 42 x 42 30247 REDUCING TEE 15 x 15 x 22 30204 REDUCING TEE 22 x 22 x 28 30197 REDUCING TEE 28 x 28 x 35 30221 REDUCING TEE 15 30079 STOP END 22 30080 STOP END 28 30081 STOP END 35 30082 STOP END 42 30083 STOP END 54 30084 STOP END 67 30085 STOP END 76 30086 STOP END 108 30087 STOP END 15 30230 FULL CROSS OVER 22 30231 FULL CROSS OVER 15 30237 PARTIAL CROSS OVER 22 30238 PARTIAL CROSS OVER

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of dual flush WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

240502713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

Anboly and model number on base of flush body.

Installation Requirements:

R001 R571 R581

Expiry date:

31/05/2029

Model:

ABL-3009 ABL-5008

Product Images

Approval Holder:

GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD

Company Name

GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD

Address

Weichi Park, Huangcuowei Village, Dongfeng Town, Chao’an District, Chaozhou City, Guangdong Province

Country

China

Phone

+86 0768-5388845

General Email

annie_lu0515@163.com

View All Listings by this Company

Manufacturer:

GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD

Company Name

GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD

Address

Weichi Park, Huangcuowei Village, Dongfeng Town, Chao’an District, Chaozhou City, Guangdong Province

Country

China

Phone

+86 0768-5388845

General Email

annie_lu0515@163.com

View All Listings by this Company