Directory Search Results

Print List

#240602042

Range of chromium plated interlocked, PEX lined shower hoses with EPDM rubber gaskets. Maximum operating pressure: 6.0 bar. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240602042
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
7/8-20 UNEF-2B
Marking:
CHG, KW50 or KCW50 (depending on model), Year of production (20xx) and WRAS on ferrule.
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
KCW50-Y010-XX, KW50-Y010-XX. Where XX denotes the length and can be replaced with any of the following: 20 = 20” length 26 = 26” length 32 = 32” length 44 = 44” length

Approval Holder:
CHG Europe B.V.
Company Name
CHG Europe B.V.
Postcode
THE NETHERLANDS

View All Listings by this Company

Print This Approval


#240602047

Range of air venting valves with a stainless-steel bodies and springs, plastic float and EPDM ‘O’-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 80.0°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
240602047
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
CLA-VAL logo, DN, PFA, serial number and model number on data plate
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
VENT-A-RISER NUVENT AQUA B70-526 DN25 - 1” BSP (M), NUVENT AQUA 70-516 DN50 - 2” BSP (M), NUVENT AQUA 70-516 DN80 - flanged, NUVENT AQUA 70-516 DN100 - flanged, NUVENT AQUA 70-516 DN150 - flanged & NUVENT AQUA 70-516 DN200 - flanged

Approval Holder:
Cla-Val UK Ltd.
Company Name
Cla-Val UK Ltd.
Address
Dainton House 107 Goods Station Road Tunbridge Wells
Postcode
TN1 2DR
Country
United Kingdom
Phone
01892 514400
General Email
liam.kent@cla-val.co.uk

View All Listings by this Company

Print This Approval


#241204001

Range of air release valves with plastic bodies, EPDM ‘O’ rings and polypropylene floats. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
241204001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
Bermad on body. Size, model, PN, DN, date of manufacture (MM/YYYY) on adhesive label on body.
Installation Requirements:
R001 R535
Expiry date:
31/12/2029
Model:
A30-3/4”: ¾” BSP (M). A30-1”: 1” BSP (M). C30-3/4”: ¾” BSP (M). C30-1”: 1” BSP (M). C30-2”: 2” BSP (M).

Approval Holder:
Bermad CS Ltd
Company Name
Bermad CS Ltd
Address
Kibbutz Evron 2280800, Israel

View All Listings by this Company
Manufacturer:
Bermad CS Ltd
Company Name
Bermad CS Ltd
Address
Kibbutz Evron 2280800, Israel

View All Listings by this Company

Print This Approval


#240704002

Range of T-type thermostatic mixing valves with chrome plated DZR brass bodies and EPDM ‘O’-rings incorporating a thermostatic cartridge controlling the temperature. Each inlet incorporates a stainless steel strainer. The inlets of the 252714 and 252713 models incorporate a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature of 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240704002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R010 does not apply to the 252714 and 252713 models.
Size:
See model.
Marking:
Calefi solar and Caleffi logo on body. Caleffi, pressure, temperature and other technical information on cap. CR stamped on inlet tail.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2029
Model:
252714: ½” BSP (M). 252713: ¾” BSP (M). 252701: 1” BSP (M).

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#241102001

‘Rada’ electronically controlled thermostatic blending valve, with a stainless-steel body, EPDM ‘o’ rings and seals. Maximum working pressure; 13.8 Bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241102001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (F).
Marking:
Rada logo & The Brain DRV25 on body.
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
1.1899.002 - DRV25 VALVE MODULE GL.

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 277 of 468

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.