Shower Valves

Section Code 2010 : Shower valve(s) with thermostatic temperature control

Back To Directory Sections

#241002006

Range of wall mounted, thermostatic shower valves with brass bodies (various finishes) incorporating ceramic disc headwork with dome type operating members which controls and diverts the flow between the two shower outlets. The temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. The inlet to the overhead shower incorporates a plastic flow regulator. The inlets to the valve body and the outlet to the shower handset incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with an overhead shower outlet, riser rail, shower hose and handset Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) X 1/2" BSP offset union (M).
Marking:
Hansgrohe on body, shower pole and head
Installation Requirements:
R001 R030
Expiry date:
31/10/2029
Model:
24 222 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet with thermostat. 24 223 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet EcoSmart with thermostat. 24 236 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet with thermostat and hand shower 3jet. 24 237 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet EcoSmart with thermostat and hand shower 3jet. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241002019

Wall mounted thermostatic shower valves with brass bodies (various finishes) incorporating a 2-way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic strainer. The products incorporate approved single check valves at the inlet, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 60.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4” BSP (M) x 1/2” BSP (M) offset.
Marking:
Villeroy & Boch logo on body and shower handset.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
TVS109002UK0XX & TVS109005UK0XX. XX at the end indicates the Finish of surfaces that are not in contact with water (61 - Chrome, K5 - Matt black, 76 - Brushed gold, 64 - Brushed nickel).
Product Images

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#241002021

Range of wall mounted (some concealed – see models) thermostatic blending valves with brass bodies (various finishes), incorporating single sequential headworks with single lever operating members. The inlet couplings incorporate plastic flow regulators & metal strainers. The outlets incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Taizhou Evergreat on the handle.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
EG1909001 – chrome plating – ¾” BSP (F) (concealed), EG1909001MB – matt black – ¾” BSP (F) (concealed), EG1909001BB – brushed gold – ¾” BSP (F) (concealed), EG1909001BRN – brushed nickel – ¾” BSP (F) (concealed), EG1909002 – chrome plating – ¾” BSP (F) (concealed), EG1909002MB – matt black – ¾” BSP (F) (concealed), EG1909002BB – brushed gold – ¾” BSP (F) (concealed), EG1909002BRN – brushed nickel – ¾” BSP (F) (concealed). EG1606009 – chrome plating - 3/4" BSP M x 1/2" BSP M Union Offset, EG1606010 – chrome plating - 3/4" BSP M x 1/2" BSP M Union Offset, EG1606011 – chrome plating - 3/4" BSP M x 1/2" BSP M Union Offset.
Product Images

Approval Holder:
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Company Name
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Address
Xiaqiu Industrial Area Qinggang Town Yuhuan
Country
China
General Email
sales@tzevergreat.com

View All Listings by this Company
Manufacturer:
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Company Name
Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd
Address
Xiaqiu Industrial Area Qinggang Town Yuhuan
Country
China
General Email
sales@tzevergreat.com

View All Listings by this Company

Print This Approval


#241002024

Range of thermostatic, concealed, 2 and 3 outlet shower valves with (brass bodies - various finishes) incorporating a thermostatic cartridge controlling the temperature and diverter cartridge which also controls the flow. The 2 outlet models, the cartridge only controls flow. The products contain an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP female
Marking:
ZHONG RUI YI SHENG on faceplate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Thermostatic concealed push button 2 outlet shower valve. Only differ in finishes. WJ6185203H CH WJ6185203H BBR WJ6185203H BBL WJ6185203H MB WJ6185203H BRZ Thermostatic concealed push button 3 outlet shower valve. Only differ in finishes. WJ6185303H CH WJ6185303H BBR WJ6185303H BBL WJ6185303H MB WJ6185303H BRZ

Approval Holder:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Print This Approval


#241002029

Range of T type thermostatic blending valves with (brass bodies - chrome plated finishes). The inlets incorporate a stainless-steel strainer. ISO models incorporate a servicing valve on each inlet. For use with copper pipe (BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Model Below
Marking:
Heape valve, Model, flow arrow and WRAS on body. Technical information on cap.
Installation Requirements:
R001 R010 R040 R120
Expiry date:
31/10/2029
Model:
HPT12-1/2” G - 1/2” BSP HPT12 - 3/4” G - 3/4” BSP HPT12 - 15MM 15MM compression HPT12 - 22MM 22MM compression HPT13 -1/2” G -1/2” BSP HPT13 - 3/4” G - 3/4” BSP HPT13-15MM 15MM compression HPT13-22MM 22MM compression HPT13-ISO-15MM 15MM compression HPT13-ISO-22MM 22MM compression HPT15-A-15MM 15MM compression HPT15-A-22MM 22MM compression HPT15-ISO-15MM 15MM compression HPT15-ISO-22MM 22MM compression
Product Images

Approval Holder:
Yuhuan Heape Valve Co., Ltd.
Company Name
Yuhuan Heape Valve Co., Ltd.
Address
Medicine and Package industrial area, Lupu town, Taizhou, Zhejiang, China
Country
Taizhou,

View All Listings by this Company
Manufacturer:
Yuhuan Heape Valve Co., Ltd.
Company Name
Yuhuan Heape Valve Co., Ltd.
Address
Medicine and Package industrial area, Lupu town, Taizhou, Zhejiang, China
Country
Taizhou,

View All Listings by this Company

Print This Approval


#241002032

Range of concealed wall mounted thermostatic shower valves, (brass bodies – various finishes & strim sets). Incorporating either a ceramic disc headwork, two-way diverter or both (see models). The temperature is controlled independently via a thermostatic cartridge. The valves incorporate approved single check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 44.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002032
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F)
Marking:
SLION logo on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Dual control thermostatic valve without diverter SL0316(50), SL0316(51), SL0316(02), SL0316(01), SL0310(09), SL0310(11), SL0317(31), SL0316(00), SL0310(10), SL0310(08), SL0316(58), SL0316(59), SL0314(05) Dual control thermostatic valve with diverter SL0316(52), SL0317(25), SL0317(22), SL0317(30), SL0316(33), SL0311(09), SL0311(08), SL0316(23), SL0311(07), SL0311(06), SL0317(38), SL0317(37), SL0315(12 Three-control thermostatic valve with diverter SL0106(18), SL0105(22), SL0105(33), SL0105(07), SL0106(24), SL0106(26), SL0106(27), SL0105(05), SL0111(07), SL0106(28), SL0106(29), SL0106(30), SL0111(05) Three-control thermostatic valve without diverter SL0106(17), SL0106(16), SL0106(04), SL0106(02), SL0106(03), SL0106(37), SL0106(31), SL0106(05), SL0106(32), SL0106(33), SL0106(34), SL0106(35), SL0106(36)
Product Images

Manufacturer:
ZHEJIANG SLION FLUID CONTROL CO., LTD
Company Name
ZHEJIANG SLION FLUID CONTROL CO., LTD
Address
18 Jinbo Road, Bingang Industrial Zone Shamen Town, Yuhuan City, Zhejiang

View All Listings by this Company

Print This Approval


#241002035

Range of wall mounted concealed thermostatic blending valves with (brass bodies – various finishes), incorporating single lever or cross top operating members. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002035
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
For use with Hansgrohe iBox 01 180
Marking:
Axor on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Trim Kits: 10 710 xx0 (Cross top) 10 716 xx0 (Cross top) 16 810 xx0 (Cross Top) 16 823 xx0 (Single Lever) 34 715 xx0 (Single Lever) 38 375 xx0 (Single Lever) Basic Set: 30675100 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241002036

Range of concealed thermostatic shower mixers (brass bodies - various finishes). The flow is controlled by a four-way manual diverter (3 on, 1 off positions) with single lever, cube type or dome type operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with single lever, cube type, dome type or cross top operating members. The inlets incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002036
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
To be installed with rough set 01700180 ¾” BSP (F)
Marking:
AXOR on the escutcheon
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Finish set. 10 720 xx0 10 726 xx0 11 733 xx0 12 716 xx0 16 820 xx0 16 821 xx0 34 725 xx0 38 720 xx0 39 720 xx0 39 725 xx0 Functional block 30105331 30675000 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#241002040

Range of wall mounted, thermostatic, shower mixers, (brass bodies - various finishes) incorporating a two-way ceramic disc diverter headwork to control the flow between two shower outlets with dome type operating members. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with a dome type operating member. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002040
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) X 1/2" BSP (M) Offset Unions
Marking:
Hansgrohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
26 790 xx0 Hansgrohe Croma Select S 280 Showerpipe 26 794 xx0 Hansgrohe Croma Select S 280 Showerpipe EcoSmart 9l 26 890 xx0 Hansgrohe Croma Select S Showerpipe 280 1jet with thermostat and hand shower Raindance Select S 120 3jet 26 891 xx0 Hansgrohe Croma Select S Showerpipe 280 1jet EcoSmart 9 l/min with thermostat and hand shower Raindance Select S 120 3jet Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#241002046

Range of T-type thermostatic mixing valves with DZR brass bodies. Models with compression fittings are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 3.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002046
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm or 22mm compression. ½” BSP (M or F), ¾” BSP (M or F), 1” BSP (M or F).
Marking:
TS (manufacturer’s logo), CR, temperature and flow arrow on body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Series 165011
Product Images

Manufacturer:
Taizhou Tongsheng Brass Co Ltd
Company Name
Taizhou Tongsheng Brass Co Ltd
Address
No. 67 Jinhai Road, Economic Development Zone, Yuhuan City, Zhejiang Province Yuhuan, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#241002067

Range of wall mounted thermostatic blending shower valves (brass bodies – various finishes) incorporating quarter turn ceramic disc two-way diverter headwork controlling the flow with dome or square type operating members. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button with dome or square type operating members. The inlets incorporate a stainless-steel strainer and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure; 5 Bar Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002067
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression
Marking:
Lanbiao on body
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
F3091K F3092K Where xx denotes the finish and can be replaced with any of the following: No Suffix = Chrome H = Black DYB = Matte white BZ = Perl white painted HGTS = Red bronze HTL = Yellow bronze brushed Q = Bronze QTSL = Bronze brushed bright QTS = Bronze brushed matte STS = Acid copper brushed SDMGJ = Water plated rose gold N = Nickel brushed bright light NP = Nickel brushed TJ = Titanium gold TJLS = Titanium gold brushed G = Gold GJS = Gold brushed GJSY = Zirconium gold wire drawing matte PGJFY = Zirconium gold wire drawing matte bright light PLSJ = Brushed gold LSJY = Brushed gold matte MGJ = Rose gold MGJL = Rose gold brushed DMGJ = Light rose gold brushed HTS = Red bronze brushed QHP = Grey LSQH = Grey brushed LHMGJ = Brushed yellow rose gold
Product Images

Manufacturer:
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651

View All Listings by this Company

Print This Approval


#241002071

Range of wall mounted concealed thermostatic blending valves with (brass bodies - various finishes,). The product incorporates a manual diverter valve which can be limited to control the flow between 1, 2 or 3 outlets, a separate thermostatic cartridge controls the temperature. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002071
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (F) inlets x 1/2" BSP (F) Outlets
Marking:
Tissino on faceplate
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
Concealed valve TTB-100 Thermobox shower valve Face-plate and Handle set TMA-115-P (3 outlet model, chrome) TMA-116-P (1 outlet model, chrome) TMA-117-P (2 outlet model, chrome TLC-202-xx-P (3 outlet model, various finishes) TLC-203-xx-P (1 outlet model, various finishes) TLC-204-xx-P (2 outlet model, various finishes) Where ‘xx’ shown, this denotes the surface finish and can be replaced with any of the following surface finish designations, for example: MN = Matt Black BB = Brushed Brass
Product Images

Approval Holder:
Tissino Ltd.
Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

Print This Approval


#241002077

Range of plastic smart box blending valves, incorporating a brass flow meter with or without an insulated body (see models). The products incorporate a non-return valve. For use with Polybutylene Barrier Pipe (manufactured to BS EN 7291-2:2010 ) and PEX Barrier Pipe (manufactured to BS EN 7291-3:2010) and Copper Pipe (manufactured to BS EN1057) Maximum working pressure 3.0 Bar. Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002077
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm PF inlet/outlets
Marking:
ShowerKap, ShoweKap logo and flow arrows on insulated cover
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
Nexus, Nexus Omega
Product Images

Approval Holder:
Showerkap Ltd
Company Name
Showerkap Ltd
Address
Robins Green, Knob Hill, Warnham, West Sussex, RH12 3SN

View All Listings by this Company

Print This Approval


#240602075

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240602075
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.
Marking:
BOME, CR and size on body. BOME on label on cap.
Installation Requirements:
R001 R040 R120
Expiry date:
30/06/2029
Model:
T08T151C,T08T221C T08T155C & T08T225C

Approval Holder:
Bome Srl
Company Name
Bome Srl
Address
via Allo Strego 1 Cavallirio 28010 Cavallirio
Country
Italy

View All Listings by this Company
Manufacturer:
Bome Srl
Company Name
Bome Srl
Address
via Allo Strego 1 Cavallirio 28010 Cavallirio
Country
Italy

View All Listings by this Company

Print This Approval


#240602076

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. The inlet adaptors for models DT400MX15CP & DT400MX22CP are 90° elbows instead of straight adaptors and incorporate additional integral spherical valves. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240602076
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.
Marking:
IMIX DELTA, CR and size on body. IMIX DELTA on label on cap.
Installation Requirements:
R001 R040 R120
Expiry date:
30/06/2029
Model:
DT40015CP, DT40022CP DT400MX15CP & DT400MX22CP

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#241004024

Range of wall mounted concealed electronically controlled thermostatic shower mixers, incorporating plastic solenoid valves to control the flow to various outlets activated via a remote actuator. The temperature is controlled via two transducers housed within the concealed box. The products incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure: 6.0 bar. Maximum operating temperature: 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241004024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Sedal
Installation Requirements:
R001 R009 R010 R040
Expiry date:
31/10/2029
Model:
CPU iSCU2 TH 20 CPU iSCU2 TH 30 CPU iSCU2 TH 40

Approval Holder:
Sedal S.A
Company Name
Sedal S.A
Address
AV Barcelona 264 08750 Molins De Rei Barcelona
Country
Spain

View All Listings by this Company

Print This Approval


#241088002

Range of wall mounted bar type thermostatic shower valves (brass bodies – various finishes) incorporating ceramic disc headwork which controls the flow to 2 outlets with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an optional flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241088002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4” BSP (F)
Marking:
Crosswater logo on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
RM531Wx Where x denotes the finish and is replaced with: C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite, G- Gold & T- Slate
Product Images

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#241288001

Range of wall mounted thermostatic blending valves, (brass bodies - various finishes) incorporating a single sequential headwork, controlling the flow and the temperature and a manually operated diverter to the shower outlets The inlet on the shower handset incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241288001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” x ¾” offset union
Marking:
Crosswater logo on body
Installation Requirements:
R001 R010 R030
Expiry date:
31/12/2029
Model:
RM650Wx Where x denotes the finish and is replaced with: C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite, G- Gold & T- Slate

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval


#240902077

Range of T-Type thermostatic mixing valve (chromium plated brass). For use with copper pipe to BS EN1057. Maximum working pressure; 10 Bar Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240902077
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm Compression
Marking:
Bome on Body
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
T26T153C - IN T26T150C - IN

Approval Holder:
Bome Srl
Company Name
Bome Srl
Address
via Allo Strego 1 Cavallirio 28010 Cavallirio
Country
Italy

View All Listings by this Company

Print This Approval


#241002085

Range of wall mounted (some concealed – see models) thermostatic blending valves with brass bodies (various finishes), incorporating single sequential headworks with single lever operating members. The inlet couplings incorporate plastic flow regulators & metal strainers. The outlets incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002085
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Sonas on cover plate
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
USH0088– chrome plating – ¾” BSP (F) (concealed), USH0090 – matt black – ¾” BSP (F) (concealed), USH0092– brushed gold – ¾” BSP (F) (concealed), USH0094– brushed nickel – ¾” BSP (F) (concealed), USH0089– chrome plating – ¾” BSP (F) (concealed), USH0091 – matt black – ¾” BSP (F) (concealed), USH0093 – brushed gold – ¾” BSP (F) (concealed), USH0095 – brushed nickel – ¾” BSP (F) (concealed).

Approval Holder:
Sonas Bathrooms
Company Name
Sonas Bathrooms
Address
103 Northwest Business Park · Ballycoolin. Dublin 15 ·
Postcode
D15 R88
Country
Ireland

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 28 of 31

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.