Range of thermostatic circulation valves incorporating brass bodies and EDPM ‘O’-rings. Some models incorporate a gauge port. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

2111307

Size:

DN15 – ½” BSP (F) DN20 – ¾” BSP (F)

Marking:

IMI Hydronic Engineering logo (TA), PN16, DN, CR, Zero & flow arrow on body. IMI Hydronic Engineering logo (TA) and temperature on handwheel

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

With Thermometer 52 820-015 Ta-Therm-Zero DN15 +55° 52 820-020 Ta-Therm-Zero DN20 +55° Without Thermometer 52 820-115 Ta-Therm-Zero DN15 +55° 52 820-120 Ta-Therm-Zero DN20 +55° With measuring port 52 820-815 Ta-Therm-Zero DN15 +55° 52 820-820 Ta-Therm-Zero DN20 +55°

Approval Holder:

IMI Hydronic Engineering

Company Name

IMI Hydronic Engineering

Address

Route de Crassier 19, CH-1262 Eysins, Switzerland

View All Listings by this Company

‘Tornado’ & ‘Ninjo’ ranges of freestanding and undercounter bedpan washers with flow controlled via a solenoid and discharged via type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 8.0 bar. Maximum operating temperature 60°C

Section:

2360 Bedpan Washer(s)

WRAS Approval Number:

2201055

Note:

Discharge to drain must be via a type AA, AB or AD air gap or in accordance with EN1717.

Size:

Stainless steel braided PEX lined flexible hose assembly incorporating a ½" captive nut end connection.

Marking:

Arjo on door. Model range on control panel.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

NINJO range: FD1600 & FD1610 (Free standing) FD1615 (Under counter) TORNADO range: FD1800 & FD1810 (Free standing) FD1805 (Under counter)

Approval Holder:

Arjo Huntleigh AB

Company Name

Arjo Huntleigh AB

Address

Hans Michelsensgatan 10 211 20 Malmo

View All Listings by this Company

Manufacturer:

Arjo Huntleigh AB

Company Name

Arjo Huntleigh AB

Address

Hans Michelsensgatan 10 211 20 Malmo

View All Listings by this Company

Range of commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with three ¾” x ¾” BSP (F) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet prior to a HDPE inlet hose with ¾” x ¾” captive nut end connections. Maximum working pressure 5.7 Bar. Maximum operating temperature 60°C.

Section:

2370 Washing Machine(s)

WRAS Approval Number:

2106021

Note:

This appliance incorporates a Fluid Category 5 backflow prevention device. The double check valve assemblies supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. No detergents, softeners or other products are to be placed within the dispenser compartment that represent a risk greater than Fluid Category 3.

Size:

¾” BSP (F) (to double check valve assembly)

Marking:

Alliance Laundry logo, model, serial number, product info on label on back panel. Alliance laundry logo, model, serial number on label inside of door.

Installation Requirements:

R001 R160 R574

Expiry date:

30/06/2026

Model:

UCEXXX, SCEXXX, HCEXXX, ICEXXX & PCEXXX XXX denotes the drum capacity and can be replaced with the following digits representing lb’s: 020, 030, 040, 060, 080 & 100.

Approval Holder:

Alliance Laundry CE s.r.o

Company Name

Alliance Laundry CE s.r.o

Address

Místecká 1116, 742 58 Príbor

Country

Czech Republic

Phone

+420 556 768 885

View All Listings by this Company

Range of commercial front loading, hood type & utensil washer type dishwashing machines with flow controlled by solenoid and discharged via type AB air gap (verified by test - suitable for backflow protection against fluid category 5) . The products are supplied with a grey coloured PVC supply hose. Maximum working pressure 6.0 bar. Maximum operating temperature 90°C.

Section:

2390 Dishwasher(s)

Size:

¾” BSP Captive nut.

Marking:

Hobart, manufacturers address, model no, serial no and other technical information on front casing.

Installation Requirements:

R001 R009 R520 R574

Expiry date:

30/09/2026

Model:

Frond loading: Design State: FG-16-01 Device Code: G404W-12B, G404SW-12B, G504W-10B, G504SW-10B, F504W-20B, F504SW-20B Design State: GCB-13-04 Device Code: ECO+G415W-10C, ECO+G415SW-10C Design State: GC-18-01 Device Code: GCW-10B, GCSW-20B, GCROIW-10B, GCPW-10B, GCPROIW-10B, GPW-10B, GPSW-10B, GPCROIW-10B Design State: FXB-12-04 Device Code: ECO+G515W-10C, ECO+G515SW-10C, ECO+F515W-10C, ECO+F515SW-10C Design State: FX-18-01 Device Code: FXW-10B, FXSW-10B, FXLW-10B, FXLSW-10B, FXSTDW-10B, careSW-10B, FPW-10B, FPSW-10B, GXCW-11B, GXCSW-11B, GXCROIW-11B, GXW-11B, GXSW-11B Hood type: Design State: AM-14-02 Device Code: H604W-12B, H604SW-12B Design State: AMB-14-03 Device Code: ECO+H615W-10C, ECO+H615SW-10C Design State: AMX-14-02 Device Code: AM900W-10B, AM900SW-10B, , AMXW-10B, AMXSW-10B ,AMXRW-10B, AMXRSW-10B, AMXXW-10B, AMXXSW-10B, AMXXRW-10B, AMXXRSW-10B, AUPW-10B, AUPSW-10B, AUPRSW-10B, AMXTW-10B, AUPTW-10B, AMXXLW-10B, AMXXLSW-10B, AUPLW-10B, AUPLSW-10B, Design State: TLW-18-01: Device Code: TLWW-10A, TLWSW-10A Utensil washer: Design State: UX-15-01 Device Code: UX-10A, UXS-10A, UXC-10A, UXCS-10A, UXRC-10A, UXRCS-10A, UXT-10A, UXTC-10A, UXTRC-10A, UXTH-10A, UXTLH-10A, UXTHR-10A, UXTLHR-10A, UP-10A, UPC-10A, UPRC-10A, UPT-10A, UPTC-10A, UPTRC-10A Design State: U-15-01 Device Code: ECOMAX702-11A, ECOMAX702W-11A Models added June 2022: Frond loading Design State: FXB-12-04 Device Code: FXBSW-10C, FXBSW-15C, FXBW-10C, FXLBSW-10C, GXBSW-11C, GXCBSW-11C Hood type Design State: AMB-14-03 Device Code: AMXBSW-10C, AMXBW-10C, AMXXBRSW-10C Utensil washer Design State: UXB-15-01 Device Code: UXB-10C, UXBS-10C, UXTB-10C, UXTHB-10C, UXTLHB-10C Explanation: “Design State” defines the type of Machine and the Production-Generation “Device Code” defines the Order Code for a special equipped machine

Approval Holder:

Hobart GmbH

Company Name

Hobart GmbH

Address

Robert-Bosch-Str. 17 77656 Offenburg

Country

Germany

Phone

+49 781 600-0

General Email

info@hobart.de

View All Listings by this Company

Manufacturer:

Hobart GmbH

Company Name

Hobart GmbH

Address

Robert-Bosch-Str. 17 77656 Offenburg

Country

Germany

Phone

+49 781 600-0

General Email

info@hobart.de

View All Listings by this Company

`Hy-MAG` range of electromagnetic water conditioners with blue PTFE coated bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Size:

See model.

Marking:

HY-MAG on body. HY-MAG, temperature, pressure, model, serial number and other technical information on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/10/2026

Model:

HY-MAG DN15: ½” BSP (F). HY-MAG DN20: ¾” BSP (F). HY-MAG DN25: 1” BSP (F). HY-MAG DN32: 1 ¼” BSP (F). HY-MAG DN40: 1 ½” BSP (F). HY-MAG DN50: 2” BSP (F). HY-MAG DN65: 2 ½” BSP (F). HY-MAG DN100: 100mm flanged.

Approval Holder:

Hydrotec International Water Treatment Limited

Company Name

Hydrotec International Water Treatment Limited

Address

38 Main Street Swords Country Dublin

Country

Ireland

View All Listings by this Company