Directory Search Results

Print List

#2202517

'Tangit PVC-U Plus'. Light yellow (straw) coloured, solvent cement. Apply as per manufacturer's TDS 'Tangit PVC-U PLUS TDS 070917 EN'. Cure for 24 hours@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
28/02/2027

Approval Holder:
Henkel AG & Co. KGaA
Company Name
Henkel AG & Co. KGaA
Address
40191 Dusseldorf
Country
Germany

View All Listings by this Company

Print This Approval


#2111053

Deck mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Product supplied with metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2111053
Size:
½” BSP (M)
Marking:
JTP on spout
Installation Requirements:
R001 R006 R009 R570
Expiry date:
30/11/2026
Model:
20149, 230149BBR, 270149BBL, 280149MB & IX0149 COMBINATION TAP ASSEMBLIES

Approval Holder:
Just Taps Plus UK Ltd
Company Name
Just Taps Plus UK Ltd
Address
Innovia House, Marish Wharf, St Mary's Rd, Langley
Postcode
SL3 6DA
Country
Berkshire
Phone
01895 44 22 11
General Email
info@jtpuk.co.uk

View All Listings by this Company

Print This Approval


#2112048

A range of single-hole, single outlet (fixed (model 62816) or swivel (models 63407)) electronically controlled tap assemblies with brass bodies in various finishes (see models). Flow is controlled by a solenoid valve activated via an infra-red sensor and a ceramic cartridge with a single lever operating members controlling both the flow and temperature for all models excluding 62816, which uses a mixer to control the temperature only with a single lever operating member. The spout outlets incorporate plastic aerators. All models (excluding 63407) incorporate a separate approved check valve cartridge on the inlet, verified by test (suitable for backflow protection against Fluid Category 2), The inlets of all models incorporate stainless steel strainers. Maximum working pressure 5.0 bar Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2112048
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection (63407 models only) Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection attached to check valve bodies with 1/2" BSP female inlets (62816 models only)
Marking:
Lota on operating member (all models excluding 62816) Lota on body (model 62816 only)
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2026
Model:
63407-01X 63389-51X 62816-51X X Denotes the difference in surface finish; 01 - Chrome 6801 - Matt Black 4408 - Brushed Brass 0402 - Brushed Nickel PVD 5804 - Heirloom Silver 08 - Stainless Steel 04 - Brushed Nickel
Product Images

Approval Holder:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#2112049

Single-hole, single outlet, swivel electronically controlled tap assembly with a brass body in various finishes (see model). Flow is controlled by a solenoid valve activated via an infra-red sensor and a ceramic cartridge with a single lever operating member controlling both the flow and temperature. The spout outlet incorporates a pull-out spray with a plastic aerator. The inlets incorporate approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2), and a stainless-steel strainer Maximum working pressure 5 bar. Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2112049
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection attached to check valve bodies with 1/2" BSP female inlets
Marking:
Lota on operating member
Installation Requirements:
R001 R009 R090
Expiry date:
31/12/2026
Model:
63391-01X X Denotes the difference in surface finish; 01 - Chrome 6801 - Matt Black 4408 - Brushed Brass 0402 - Brushed Nickel PVD 5804 - Heirloom Silver 08 - Stainless Steel 04 - Brushed Nickel
Product Images

Approval Holder:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#2112346

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112346
Size:
½” BSP (M)
Marking:
Geberit label on cistern. Month/Year date clock on rear cistern Geberit on flush plate. 6L waterline mould within cistern
Installation Requirements:
R001 R571
Expiry date:
31/12/2026
Model:
Geberit Omega concealed cistern 109.041.00.1 109.051.00.1 109.061.00.1 Geberit Omega Duofix frame for wall hung WC, 111.004.00.1 111.031.00.1 111.061.00.1 Model added July August 2023: 111.004.00.3 Model added February 2025 111.004.00.4
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 229 of 802

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.