Kisdon range of single hole single outlet (swivel) pull out spray combination tap assembly (chromium plated brass) with ¼ turn ceramic disc headwork and single lever operating members. The outlet of the pull-out spray incorporates a plastic flow aerator and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

250814303

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2" BSP

Marking:

WIX on tap body

Installation Requirements:

R001 R090

Expiry date:

31/08/2030

Model:

170099 311142 313077 313078 313079 313087

Product Images

Approval Holder:

Wickes PLC

Company Name

Wickes PLC

Address

Vision House, Colonial Way, Watford.

Postcode

WD24 4JL

Country

United Kingdom

Phone

01923 656600

General Email

Steven.ferry@wickes.co.uk

View All Listings by this Company

Section:

0470 Combination Tap Assemblies

Description:

A Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted. Stainless steel braided EPDM lined flexible inlet hose assemblies. Capable of achieving AUK3 Tap Gap. Supplied with a 15x15mm compression isolation valves that incorporate single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

31/08/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve (suitable for back flow protection against fluid category 3) and a stainless-steel braided EPDM lined hose. The isolation valves are operated via a single lever. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1015 Filling Loop

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Orkli logoon valve body, production date and hour (DD/MM/YY hh:mm) printed on ball valve body; CR, flow arrow, Orkli logo on double check valve body

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

9E26009

Approval Holder:

Orkli S. Coop

Company Name

Orkli S. Coop

Address

Ctra. Zaldibia, s/n Ordizia

Postcode

20240

Country

Spain

Phone

+34 610 146 459

General Email

iangulo@orkli.es

View All Listings by this Company

Range of filling loop assemblies consisting of an in-line isolation valve, an in-line double check valve assembly (suitable for back flow protection against fluid category 3) that incorporates an isolation valve and a stainless-steel braided EPDM lined hose. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression or 15mm pushfit.

Marking:

Altecnic logo, flow arrow and CR on valve. Altecnic, WRAS and date of manufacture (YYYY) on hose.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

521726, 941192.

Approval Holder:

City Plumbing

Company Name

City Plumbing

Address

Highbourne House, 1 Eldon Way, Crick, Northamptonshire

Postcode

NN6 7SL

View All Listings by this Company

Manufacturer:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

View All Listings by this Company

Range of M profile copper press fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404076

Size:

see models

Marking:

Brand name MAMBA, size, month/year & WRAS on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

MAMBA Range: STRAIGHT COUPLING CxC: 60111515 15mm PRESSFIT COUPLER 60112222 22mm PRESSFIT COUPLER 60112828 28mm PRESSFIT COUPLER 60113535 35mm PRESSFIT COUPLER 60114242 42mm PRESSFIT COUPLER 60115454 54mm PRESSFIT COUPLER SLIP COUPLING C x C: 60171515 15mm PRESSFIT SLIP COUPLER 60172222 22mm PRESSFIT SLIP COUPLER 60172828 28mm PRESSFIT SLIP COUPLER 60173535 35mm PRESSFIT SLIP COUPLER 60174242 42mm PRESSFIT SLIP COUPLER 60175454 54mm PRESSFIT SLIP COUPLER REDUCING COUPLING C x C: 60112215 22mm X 15mm PRESSFIT REDUCING COUPLER 60112815 28mm X 15mm PRESSFIT REDUCING COUPLER 60112822 28mm X 22mm PRESSFIT REDUCING COUPLER 60113515 35mm X 15mm PRESSFIT REDUCING COUPLER 60113522 35mm X 22mm PRESSFIT REDUCING COUPLER 60113528 35mm X 28mm PRESSFIT REDUCING COUPLER 60114215 42mm X 15mm PRESSFIT REDUCING COUPLER 60114222 42mm X 22mm PRESSFIT REDUCING COUPLER 60114228 42mm X 28mm PRESSFIT REDUCING COUPLER 60114235 42mm X 35mm PRESSFIT REDUCING COUPLER 60115415 54mm X 15mm PRESSFIT REDUCING COUPLER 60115422 54mm X 22mm PRESSFIT REDUCING COUPLER 60115428 54mm X 28mm PRESSFIT REDUCING COUPLER 60115435 54mm X 35mm PRESSFIT REDUCING COUPLER 60115442 54mm X 42mm PRESSFIT REDUCING COUPLER FITTING REDUCER F x C: 60132215 22mm X 15mm PRESSFIT FITTNG REDUCER 60132815 28mm X 15mm PRESSFIT FITTNG REDUCER 60132822 28mm X 22mm PRESSFIT FITTNG REDUCER 60133515 35mm X 15mm PRESSFIT FITTNG REDUCER 60133522 35mm X 22mm PRESSFIT FITTNG REDUCER 60133528 35mm X 28mm PRESSFIT FITTNG REDUCER 60134215 42mm X 15mm PRESSFIT FITTNG REDUCER 60134222 42mm X 22mm PRESSFIT FITTNG REDUCER 60134228 42mm X 28mm PRESSFIT FITTNG REDUCER 60134235 42mm X 35mm PRESSFIT FITTNG REDUCER 60135415 54mm X 15mm PRESSFIT FITTNG REDUCER 60135422 54mm X 22mm PRESSFIT FITTNG REDUCER 60135428 54mm X 28mm PRESSFIT FITTNG REDUCER 60135435 54mm X 35mm PRESSFIT FITTNG REDUCER 60135442 54mm X 42mm PRESSFIT FITTNG REDUCER 90DEG ELBOW C x C: 60411515 15mm PRESSFIT ELBOW 60412222 22mm PRESSFIT ELBOW 60412828 28mm PRESSFIT ELBOW 60413535 35mm PRESSFIT ELBOW 60414242 42mm PRESSFIT ELBOW 60415454 54mm PRESSFIT ELBOW 90DEG STREET ELBOW F x C: 60431515 15mm PRESSFIT STREET ELBOW 60432222 22mm PRESSFIT STREET ELBOW 60432828 28mm PRESSFIT STREET ELBOW 60433535 35mm PRESSFIT STREET ELBOW 60434242 42mm PRESSFIT STREET ELBOW 60435454 54mm PRESSFIT STREET ELBOW 45DEG ELBOW C x C: 60451515 15mm PRESSFIT OBTUSE ELBOW 60452222 22mm PRESSFIT OBTUSE ELBOW 60452828 28mm PRESSFIT OBTUSE ELBOW 60453535 35mm PRESSFIT OBTUSE ELBOW 60454242 42mm PRESSFIT OBTUSE ELBOW 60455454 54mm PRESSFIT OBTUSE ELBOW 45DEG STREET ELBOW F x C: 60481515 15mm PRESSFIT OBTUSE STREET ELBOW 60482222 22mm PRESSFIT OBTUSE STREET ELBOW 60482828 28mm PRESSFIT OBTUSE STREET ELBOW 60483535 35mm PRESSFIT OBTUSE STREET ELBOW 60484242 42mm PRESSFIT OBTUSE STREET ELBOW 60485454 54mm PRESSFIT OBTUSE STREET ELBOW CAP C x C: 60811515 15mm PRESSFIT STOP END 60812222 22mm PRESSFIT STOP END 60812828 28mm PRESSFIT STOP END 60813535 35mm PRESSFIT STOP END 60814242 42mm PRESSFIT STOP END 60815454 54mm PRESSFIT STOP END EQUAL TEE C x C: 60151515 15mm PRESSFIT TEE 60222222 22mm PRESSFIT TEE 60282828 28mm PRESSFIT TEE 60353535 35mm PRESSFIT TEE 60424242 42mm PRESSFIT TEE 60545454 54mm PRESSFIT TEE PART CROSSOVER F x C: 60271515 15mm PRESSFIT PART CROSSOVER 60272222 22mm PRESSFIT PART CROSSOVER CROSSOVER C x C: 60291515 15mm PRESSFIT FULL CROSSOVER 60292222 22mm PRESSFIT FULL CROSSOVER REDUCER ELBOW 60412215 22mm X 15mm PRESSFIT REDUCING ELBOW REDUCING TEE: 60221515 22mm X 15mm X 15mm PRESSFIT REDUCING TEE 60221522 22mm X 15mm X 22mm PRESSFIT REDUCING TEE 60282222 28mm X 22mm X 22mm PRESSFIT REDUCING TEE 60282228 28mm X 22mm X 28mm PRESSFIT REDUCING TEE 60222215 22mm X 22mm X 15mm PRESSFIT REDUCING TEE 60282815 28mm X 28mm X 15mm PRESSFIT REDUCING TEE 60282822 28mm X 28mm X 22mm PRESSFIT REDUCING TEE 60353515 35mm X 35mm X 15mm PRESSFIT REDUCING TEE 60353522 35mm X 35mm X 22mm PRESSFIT REDUCING TEE 60353528 35mm X 35mm X 28mm PRESSFIT REDUCING TEE 60424215 42mm X 42mm X 15mm PRESSFIT REDUCING TEE 60424222 42mm X 42mm X 22mm PRESSFIT REDUCING TEE 60424228 42mm X 42mm X 28mm PRESSFIT REDUCING TEE 60424235 42mm X 42mm X 35mm PRESSFIT REDUCING TEE 60545415 54mm X 54mm X 15mm PRESSFIT REDUCING TEE 60545422 54mm X 54mm X 22mm PRESSFIT REDUCING TEE 60545428 54mm X 54mm X 28mm PRESSFIT REDUCING TEE 60545435 54mm X 54mm X 35mm PRESSFIT REDUCING TEE 60545442 54mm X 54mm X 42mm PRESSFIT REDUCING TEE

Product Images

Approval Holder:

MDS Global Sourcing Ltd

Company Name

MDS Global Sourcing Ltd

Address

10 Alesbury Court Lapworth

Postcode

B94 6BE

Country

United Kingdom

Phone

07771 755057

General Email

scott@mdsgroup.co.uk

View All Listings by this Company

Range of stainless-steel(SS304L) press fittings with EPDM ‘O’-rings for use with stainless-steel pipe to EN10312. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

MTF, model number, Size on fitting

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling GDC5001 OD15 GDC5002 OD18 GDC5003 OD22 GDC5004 OD28 GDC5005 OD35 GDC5006 OD42 GDC5007 OD54 GDC6501 OD66.7 GDC5008 OD76.1 GDC5009 OD88.9 GDC5010 OD108 Long Coupling GDC5011 OD15 GDC5012 OD18 GDC5013 OD22 GDC5014 OD28 GDC5015 OD35 GDC5016 OD42 GDC5017 OD54 GDC6502 OD66.7 GDC5018 OD76.1 GDC5019 OD88.9 GDC5020 OD108 Reducer with Plain End GDC5021 OD18×OD15 GDC5022 OD22×OD15 GDC5023 OD22×OD18 GDC5024 OD28×OD15 GDC5025 OD28×OD18 GDC5026 OD28×OD22 GDC5048 OD35×OD15 GDC5027 OD35×OD18 GDC5029 OD35×OD22 GDC5030 OD35×OD28 GDC5031 OD42×OD15 GDC5032 OD42×OD18 GDC5033 OD42×OD22 GDC5034 OD42×OD28 GDC5035 OD42×OD35 GDC5036 OD54×OD15 GDC5037 OD54×OD18 GDC5038 OD54×OD22 GDC5039 OD54×OD28 GDC5040 OD54×OD35 GDC5041 OD54×OD42 GDC6503 OD66.7×OD42 GDC6504 OD66.7×OD54 GDC5028 OD76.1×OD42 GDC5042 OD76.1×OD54 GDC6505 OD76.1×OD66.7 GDC5049 OD88.9×OD42 GDC5043 OD88.9×OD54 GDC6506 OD88.9×OD66.7 GDC5044 OD88.9×OD76.1 GDC5045 OD108×OD54 GDC6507 OD108×OD66.7 GDC5046 OD108×OD76.1 GDC5047 OD108×OD88.9 90° Elbow GDC6051 OD15 GDC6052 OD18 GDC6053 OD22 GDC6054 OD28 GDC6055 OD35 GDC6056 OD42 GDC6057 OD54 GDC6511 OD66.7 GDC6058 OD76.1 GDC6059 OD88.9 GDC6060 OD108 90° Elbow with Plain End GDC6071 OD15 GDC6072 OD18 GDC6073 OD22 GDC6074 OD28 GDC6075 OD35 GDC6076 OD42 GDC6077 OD54 GDC6512 OD66.7 GDC6078 OD76.1 GDC6079 OD88.9 GDC6080 OD108 45° Elbow GDC6101 OD15 GDC6102 OD18 GDC6103 OD22 GDC6104 OD28 GDC6105 OD35 GDC6106 OD42 GDC6107 OD54 GDC6513 OD66.7 GDC6108 OD76.1 GDC6109 OD88.9 GDC6110 OD108 45° Elbow with Plain End GDC6121 OD15 GDC6122 OD18 GDC6123 OD22 GDC6124 OD28 GDC6125 OD35 GDC6126 OD42 GDC6127 OD54 GDC6514 OD66.7 GDC6128 OD76.1 GDC6129 OD88.9 GDC6130 OD108 Tee GDC5181 OD15 GDC5182 OD18 GDC5183 OD22 GDC5184 OD28 GDC5185 OD35 GDC5186 OD42 GDC5187 OD54 GDC6515 OD66.7 GDC5188 OD76.1 GDC5189 OD88.9 GDC5190 OD108 Reducing Tee GDC5191 OD18×OD15 GDC5192 OD22×OD15 GDC5193 OD22×OD18 GDC5194 OD28×OD15 GDC5195 OD28×OD18 GDC5196 OD28×OD22 GDC5197 OD35×OD15 GDC5198 OD35×OD18 GDC5199 OD35×OD22 GDC5200 OD35×OD28 GDC5201 OD42×OD15 GDC5202 OD42×OD18 GDC5203 OD42×OD22 GDC5204 OD42×OD28 GDC5205 OD42×OD35 GDC5206 OD54×OD15 GDC5207 OD54×OD18 GDC5208 OD54×OD22 GDC5209 OD54×OD28 GDC5210 OD54×OD35 GDC5211 OD54×OD42 GDC6517 OD66.7×OD22 GDC6518 OD66.7×OD28 GDC6519 OD66.7×OD35 GDC6520 OD66.7×OD42 GDC6521 OD66.7×OD54 GDC5212 OD76.1×OD22 GDC5213 OD76.1×OD28 GDC5214 OD76.1×OD35 GDC5215 OD76.1×OD42 GDC5216 OD76.1×OD54 GDC6522 OD76.1×OD66.7 GDC5217 OD88.9×OD22 GDC5218 OD88.9×OD28 GDC5219 OD88.9×OD35 GDC5220 OD88.9×OD42 GDC5221 OD88.9×OD54 GDC6523 OD88.9×OD66.7 GDC5222 OD88.9×OD76.1 GDC5223 OD108×OD22 GDC5224 OD108×OD28 GDC5225 OD108×OD35 GDC5226 OD108×OD42 GDC5227 OD108×OD54 GDC6524 OD108×OD66.7 GDC5228 OD108×OD76.1 GDC5229 OD108×OD88.9 Tee with Male Thread End GDC5231 OD15×R1/2 GDC5232 OD18×R1/2 GDC5239 OD22×R1/2 GDC5233 OD22×R3/4 GDC5234 OD22×R1 GDC5240 OD28×R1/2 GDC5283 OD28×R3/4 GDC5235 OD28×R1 GDC5281 OD35×Rp3/4 GDC5236 OD35×Rp1 1/4 GDC5237 OD42×Rp1 1/2 GDC5282 OD54×Rp1/2 GDC5238 OD54×Rp2 Tee with Female Thread End GDC5241 OD15×Rp1/2 GDC5242 OD18×Rp1/2 GDC5243 OD18×Rp3/4 GDC5244 OD22×Rp1/2 GDC5245 OD22×Rp3/4 GDC5246 OD28×Rp1/2 GDC5247 OD28×Rp3/4 GDC5248 OD28×Rp1 GDC5249 OD35×Rp1/2 GDC5250 OD35×Rp3/4 GDC5262 OD35×Rp1 GDC5263 OD35×Rp1 1/4 GDC5251 OD42×Rp1/2 GDC5252 OD42×Rp3/4 GDC5264 OD42×Rp1 GDC5265 OD42×Rp1 1/2 GDC5253 OD54×Rp1/2 GDC5254 OD54×Rp3/4 GDC5266 OD54×Rp1 GDC5255 OD54×Rp2 GDC6531 OD66.7×Rp1/2 GDC6532 OD66.7×Rp3/4 GDC6533 OD66.7×Rp1 1/2 GDC5256 OD76.1×Rp3/4 GDC5257 OD76.1×Rp2 GDC5258 OD88.9×Rp3/4 GDC5259 OD88.9×Rp2 GDC5260 OD108×Rp3/4 GDC5261 OD108×Rp2 Adaptor with Male Thread End GDC5360 OD15×R3/8 GDC5361 OD15×R1/2 GDC5362 OD15×R3/4 GDC5363 OD18×R1/2 GDC5364 OD18×R3/4 GDC5365 OD22×R1/2 GDC5366 OD22×R3/4 GDC5367 OD22×R1 GDC5368 OD28×R3/4 GDC5369 OD28×R1 GDC5370 OD28×R1 1/4 GDC5371 OD35×R1 GDC5372 OD35×R1 1/4 GDC5373 OD35×R1 1/2 GDC5374 OD42×R1 1/4 GDC5375 OD42×R1 1/2 GDC5376 OD54×R1 1/2 GDC5377 OD54×R2 GDC6541 OD66.7×R2 1/2 GDC5378 OD76.1×R2 1/2 GDC5379 OD88.9×R3 GDC5380 OD108×R4 Adaptor with Female Thread End GDC5381 OD15×Rp1/2 GDC5382 OD15×Rp3/4 GDC5383 OD18×Rp1/2 GDC5384 OD18×Rp3/4 GDC5385 OD22×Rp1/2 GDC5386 OD22×Rp3/4 GDC5387 OD22×Rp1 GDC5388 OD28×Rp3/4 GDC5389 OD28×Rp1 GDC5390 OD28×Rp1 1/4 GDC5391 OD35×Rp1 GDC5392 OD35×Rp1 1/4 GDC5393 OD35×Rp1 1/2 GDC5394 OD42×Rp1 1/4 GDC5395 OD42×Rp1 1/2 GDC5396 OD54×Rp1 1/2 GDC5397 OD54×Rp2 GDC6542 OD66.7×Rp2 1/2 GDC5398 OD76.1×Rp2 1/2 GDC5399 OD88.9×Rp3 GDC5400 OD108×Rp4 Cap GDC5421 OD15 GDC5422 OD18 GDC5423 OD22 GDC5424 OD28 GDC5425 OD35 GDC5426 OD42 GDC5427 OD54 GDC6542 OD66.7 GDC5428 OD76.1 GDC5429 OD88.9 GDC5430 OD108 Adaptor with Union Nut GDC5341 OD15×G1/2 GDC5353 OD15×G3/4 GDC5342 OD18×G1/2 GDC5343 OD18×G3/4 GDC5345 OD22×G1 GDC5347 OD28×G1 GDC5348 OD28×G1 1/4 GDC5359 OD35×G1 1/4 GDC5350 OD35×G1 1/2 GDC5351 OD42×G1 3/4 GDC5346 OD42×G1 1/2 GDC5356 OD54×G2 GDC5352 OD54×G2 3/8 Adaptor with Union with Female thread GDC5451 OD15×Rp1/2 GDC5452 OD15×Rp3/4 GDC5453 OD18×Rp1/2 GDC5454 OD18×Rp3/4 GDC5455 OD22×Rp3/4 GDC5456 OD22×Rp1 GDC5457 OD28×Rp1 GDC5458 OD35×Rp1 1/4 GDC5459 OD42×Rp1 1/2 GDC5460 OD54×Rp2 Adaptor Union with Male Thread GDC5431 OD15×R1/2 GDC5432 OD15×R3/4 GDC5433 OD18×R1/2 GDC5434 OD18×R3/4 GDC5435 OD22×R1/2 GDC5436 OD22×R3/4 GDC5437 OD22×R1 GDC5438 OD28×R1 GDC5439 OD35×R1 1/4 GDC5440 OD42×R1 1/2 GDC5441 OD54×R2 Adaptor Union GDC5471 OD15 GDC5472 OD18 GDC5473 OD22 GDC5474 OD28 GDC5475 OD35 GDC5476 OD42 GDC5477 OD54 Flange with Pressing Socket GDC5301 OD15 GDC5302 OD18 GDC5303 OD22 GDC5304 OD28 GDC5305 OD35 GDC5306 OD42 GDC5307 OD54 GDC6536 OD66.7 GDC5308 OD76.1 GDC5309 OD88.9 GDC5310 OD108

Approval Holder:

Marla Tube Fittings Limited

Company Name

Marla Tube Fittings Limited

Address

Kinwarton Farm Road Alcester

Postcode

B49 6EH

Country

United Kingdom

Phone

01789 761207

General Email

graham.walker@marla.co.uk

View All Listings by this Company

U Profile range of press fittings incorporating EPDM ‘O’-rings. For use with Mingshi (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304383

Size:

16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).

Marking:

Fitting: Mingshi and size on body. Pipe: Mingshi, Mingshi logo, WRAS, size, length, temperature, pressure, date of manufacture (DD/MM/YYYY) and ISO standard on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

Straight: PS16X16 PS20X20 PS25X25 PS32X32 Reduced straight: PS20X16 PS25X16 PS25X20 PS32X16 PS32X20 PS32X25 Male straight: PS16X1/2M PS16X3/4M PS20X1/2M PS20X3/4M PS20x1M PS25x1/2M PS25X3/4M PS25X1M PS32x1/2M PS32X3/4M PS32X1M PS32x11/4M PS32x11/2M Female straight: PS16X1/2F PS16X3/4F PS16X1F PS20X1/2F PS20X3/4F PS20x1F PS25X1/2F PS25X3/4F PS25X1F PS32x1/2F PS32X3/4F PS32X1F PS32X11/4F PS32x11/2F Elbow: PL16X16 PL20X20 PL25x25 PL32X32 Male elbow: PL16X1/2M PL16X3/4M PL20X1/2M PL20X3/4M PL20x1M PL25X1/2M PL25X3/4M PL25X1M PL32x1/2M PL32x3/4M PL32X1M PL32x11/4M Female elbow: PL16X1/2F PL16X3/4F PL20X1/2F PL20X3/4F PL20x1F PS25X1/2F PS25X3/4F PS25X1F PL32x1/2F PS32X3/4F PS32X1F PL32x11/4F Wall plated elbow: PZL16X1/2F PZL16x3/4F PZL20X1/2F PZL20X3/4F Tee: PT16X16X16 PT20X20X20 PT25X25X25 PT32X32X32 Reduced tee: PT16X20X16 PT16X25X16 PT20X16X20 PT20X25X20 PT25X16X25 PT25X16X16 PT25X20X25 PT25X32X25 PT32X16X32 PT32X20X32 PT32X25X32 PT25x16x20 PT32x20x25 PT32x20x26 PT20X16X16 PT20X20X16 PT25X25X20 PT25X20X20 PT25x16x20 PT32x20x25 PT32x32x16 PT32x32x20 PT32x25x25 Male tee: PT16X1/2MX16 PT16x3/4Mx16 PT20X1/2MX20 PT20X3/4MX20 Female tee: PT16X1/2FX16 PT16X3/4FX16 PT20X1/2FX20 PT20X3/4FX20 PT20X1FX20 PT25X1/2FX25 PT25X3/4FX25 PT25X1FX25 32X1/2FX32 PT32X3/4FX32 PT32X1FX32 PT32X11/4FX32 Cap: PSE16 PSE20 PSE25 PSE32 Female union: PS16X1/2F-H PS16X3/4F-H PS20X1/2F-H PS20X3/4F-H PS25X1/2F-H PS25X3/4F-H PS25X1F-H PS32X1F-H Pipe: ALPEX162 ALPEX202 ALPEX252 ALPEX323

Approval Holder:

Pedarson LTD

Company Name

Pedarson LTD

Address

Unit 16 Martlesham Creek Ind Est Sandy Lane Woodbridge Suffolk

Postcode

IP12 4SD

Country

United Kingdom

Phone

01394384077

View All Listings by this Company

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of stainless-steel press fittings (SUS304 or 316L) with EPDM ‘O’-rings for use with stainless-steel pipe (SUS304 or 316L EN 10312), using an ‘M’ press profile. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

KPress logo, material and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HB-H15XXX - 45 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I15XXX - 45 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H16XXX - 45 Degree Plain End Elbow - SUS304 - 28, 35, 42, 54. HB-I16XXX - 45 Degree Plain End Elbow - SUS316L - 28, 35, 42, 54. HB-H07XXX - 90 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I07XXX - 90 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H08XXX - 90 Degree Female Thread Elbow - SUS304 - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-I08XXX - 90 Degree Female Thread Elbow - SUS316L - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-H09XXX - 90 Degree Male Thread Elbow - SUS304 - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-I09XXX - 90 Degree Male Thread Elbow - SUS316L - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-H14XXX - 90 Degree Plain End Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I14XXX - 90 Degree Plain End Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H18XXX - Cap - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I18XXX - Cap - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H01XXX - Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I01XXX - Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H03XXX - Male Thread Adapter - SUS304 - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-I03XXX - Male Thread Adapter - SUS316L - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-H24XXX - Plain End Coupling - SUS304 - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-I24XXX - Plain end Coupling - SUS316L - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-H02XXX - Reducing Coupling - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I02XXX - Reducing Coupling - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H13XXX - Reducing Cross - SUS304 - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-I13XXX - Reducing Cross - SUS316L - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-H06XXX - Reducing Tee - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I06XXX - Reducing Tee - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H19XXX - Slip Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I19XXX - Slip Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H11XXX - Tee with male Thread - SUS304 - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-I11XXX - Tee with male Thread - SUS316L - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-H20XXX - Union Adapter - SUS304 - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-I20XXX - Union Adapter - SUS316L - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-H05XXX - Equal Tee - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I05XXX - Equal Tee - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H12XXX - Equal Cross - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I12XXX - Equal Cross - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H10XXX - Tee with Female Thread - SUS304 - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-I10XXX - Tee with Female Thread - SUS316L - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-H00XXX - Stainless Steel Pipe - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I00XXX - Stainless Steel Pipe - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108.

Product Images

Approval Holder:

Kesanitar GmbH

Company Name

Kesanitar GmbH

Address

Märkische Straße 12, 47809 Krefeld, NRW

Country

Germany

Phone

+49 2151 3624071

General Email

info@kesanitar.com

View All Listings by this Company

Range of ultrasonic water meters with brass bodies and EPDM O-rings. The inlets incorporate a double check valve assembly, verified by test - suitable for backflow protection against Fluid Category 3. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Huizhong logo, Model No, DN, CR and product info on face. CR and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

SCL-61H-100 DN25: ¾” BSP (M) DN40: ¾” BSP (M)

Approval Holder:

Huizhong Instrumentation Co., Ltd.

Company Name

Huizhong Instrumentation Co., Ltd.

Address

No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province

Country

China

View All Listings by this Company