Directory Search Results

Print List

#250655020

'BLAZEMASTER® 88065 Orange 734 M PEL 8065OMAM'. Orange coloured, injection moulded c-PVC fittings. For use with water up to 23°C.

Section:
5301 Polyvinylchloride (PVC, PVC-U and CPVC)
Section Subtitle:
Components.
WRAS Approval Number:
250655020
Expiry date:
30/06/2030

Approval Holder:
Lubrizol Advanced Materials
Company Name
Lubrizol Advanced Materials
Address
4200 Bells Lane, 40211 Louisville, Kentucky
Country
USA

View All Listings by this Company

Print This Approval


#250602712

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 Bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250602712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
My life, Wras and model number on cistern, 6 Litre mark inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2030
Model:
MLSOLCC

Approval Holder:
MyLife Bathrooms Limited
Company Name
MyLife Bathrooms Limited
Address
Greenbank Industrial Estate Rampart Road Newry Co. Down BT342QU Ireland

View All Listings by this Company

Print This Approval


#250604015

Range of deck mounted two hole, single outlet, fixed combination tap assemblies, (brass bodies – various finishes), incorporating a ceramic disc headwork controlling the flow with a dome type operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. The spout outlet incorporates a plastic aerator. Models SHTLV106/1B & SHTLV106/2BK are supplied with a shower hose & shower handset and riser rail. Model TLV106 is supplied with a shower hose & shower handset. All models are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0554 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a swivel spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
WRAS Approval Number:
250604015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M)
Marking:
SHTLV106/2BK SHTLV106/1B TLV106
Installation Requirements:
R001 R006 R030
Expiry date:
30/06/2030
Model:
SHTLV106/2BK SHTLV106/1B TLV106 SHTLV106/1BK.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#250604016

Wall mounted, two hole, single outlet, fixed combination tap assemblies, (brass bodies – various finishes), incorporating a ceramic disc headwork controlling the flow with a dome type operating member and a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3). Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. The spout outlet incorporates a plastic aerator. All models are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0554 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a swivel spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
WRAS Approval Number:
250604016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F).
Marking:
DTC53 on rear and Methven on front of body.
Installation Requirements:
R001 R006 R030
Expiry date:
30/06/2030
Model:
TLV106WM B.O.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#250608302

Section:
1670 Shower Outlets
Description:
A Range of Shower kit(s)
Deck Mounted Interlocked PEX lined Shower Hose Stainless Steel Braided PEX lined connection hose IRN R007 only applies to the connection hose.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R007 R040
Expiry date:
30/06/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
HNHS40-BlackVarious1/2" FOpen Outlet bar65 °CWaterworks logoShower handsetNoNoneShower Hose, Handset,
HNHS40-GreyVarious1/2"Open Outlet bar65 °CWaterworks LogoShower HandsetNoShower Hose, Handset,

Notes & Further Information

Finishes Available - Brass, Chrome, Nickel, Burnished Brass, Matte Nickel, Brass/Dark Nickel, Copper, Dark Brass, Dark Nickel, Vintage Brass, Gold, Matte Gold

Product Images

Approval Holder:
In Compliance GmbH
Company Name
In Compliance GmbH
Address
Kathe-Kollwitz-Ring 5a Unna
Postcode
59423
Country
Germany
General Email
jutta.emge-degenhardt@in-compliance.de

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2191 of 2277

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.