WHB, WHBV & ALS series of wall mounted, anti-ligature wash hand basins and tap outlets. The flow is controlled via a solenoid valve and the internal connecting pipework is pushfit. The WHB and ALS series can have one or two inlets, one or two outlets and the basin can have one or two piezo activated buttons. The WHBV series has two inlets, two outlets and the basin has two piezo activated buttons. The products are for use with copper pipe (manufactured to EN 1057) and are supplied with a plastic aerator and flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

251002004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R006 applies only when the plastic aerator/ flow straightener is fitted. R008 applies to the solenoid valve. The products are intended to be installed with an elbow fitting between the solenoid valve and copper pipe and this isn’t supplied by the approval holder.

Size:

15mm compression

Marking:

Wallgate on top of tap casing.

Installation Requirements:

R001 R006 R008 R010

Expiry date:

31/10/2030

Model:

ALS Series Basin Range: ALS-180 (Pushfit) ALS-180-IR (Pushfit) ALS-181 (Pushfit) ALS-181-IR (Pushfit) WHB Series Basin Range: WHB-200 (Pushfit) WHB-200-IR (Pushfit) WHB-201 (Pushfit) WHB-201-IR (Pushfit) WHBV Series Basin Range: WHBV-101W-LH (Pushfit) WHBV-101W-RH (Pushfit) WHBV-101W-LH-IR (Pushfit) WHBV-101W-RH-IR (Pushfit)

Approval Holder:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane, Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company

Manufacturer:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane, Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company

Range of combined bath waste and overflow assemblies in various finishes.(see models for finishes) Maximum operating temperature: 60ºC

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

241002112

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

Stainless steel braided, EPDM lined, flexible hose assembly with 1½” BSP (M) (Pop Up Waste)

Marking:

Bagnodesign logo on face plate & WRAS on hose connection ferrule.

Installation Requirements:

R001 R576

Expiry date:

31/10/2029

Model:

BDP-ZEP-110-XX (waste and overflow). XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of free-standing sanitary macerating disposal units. The units are fed via a flexible hose assembly. Flow is controlled by a solenoid valve and discharges via a type `AB` air gap (verified by test, suitable of fluid category 5 backflow protection). Maximum working pressure 6.0 Bar Maximum operating temperature 40.0°C

Section:

0950 Disposal Unit(s)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC hose with 3/4" BSP captive nut end connections.

Marking:

DDC and Pulpmatic flex on front of unit body

Installation Requirements:

R001 R574

Expiry date:

30/09/2030

Model:

FLX000-50HZ 240V - Pulpmatic Flex Macerator FLX000-60HZ 110V - Pulpmatic Flex Macerator UL

Product Images

Manufacturer:

DDC Dolphin Ltd.

Company Name

DDC Dolphin Ltd.

Address

The Fulcrum, Vantage Way, Poole

Postcode

BH12 4NU

Country

Dorset,

Phone

+44 (0)1202 724858

View All Listings by this Company

Range of monochloramine generators incorporating UPVC pipework, fittings and an external flow sensor. Maximum working pressure 6.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

250302705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP F

Marking:

Sanikill Tec on adhesive label on body

Installation Requirements:

R001 R008 R415 R575

Expiry date:

31/03/2030

Model:

ESKUT-LT1002 SANIKILL Tec 500 g. ESKUT-LT2004 SANIKILL Tec 1 kg.

Product Images

Approval Holder:

Sanipur S.p.A.

Company Name

Sanipur S.p.A.

Address

Via S. Quasimodo,25 25020 Flero (BS)

Country

Italy

General Email

b.fermi@sanipur.it

View All Listings by this Company

Range of cylindrical or tubular expansion vessels with epoxy coated carbon steel bodies. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” or 1” BSP (M)

Marking:

Trade-Tec, size in L and technical information on adhesive label

Installation Requirements:

R001 R530

Expiry date:

30/06/2029

Model:

TRPVES08 TRPVES12 TRPVES19 TRPVES24 TRPVES35 TRPVES50 TRPVES80 TRPVES100

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company