Directory Search Results

Print List

#2203041

Mitsubishi EHWT17D-MHEDW indirectly heated stainless-steel unvented storage cylinder consisting of plate heat exchangers. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar and 90˚C. A safety kit (manifold) consisting of an approved single check valve cartridge (verified by test as suitable for backflow protection against Fluid Category 2), strainer, a pressure relief valve set at 6.0 bar and pressure reducing valve set at 3.5 bar. The space heating circuit is factory fitted with a pressure relief valve fitted rated at 3.0 bar and an automatic air vent. A tundish, expansion vessel and filling loop are also supplied. Maximum secondary (wholesome) circuit working pressure: 5.5 bar. Maximum Space heating (primary) circuit working pressure: 2.5 bar. Maximum brine/ambient circuit working pressure: 9.5 bar. Maximum operating temperature 70°C

Section:
1890 Unvented Heating Apparatus
Size:
Secondary Circuit: 22mm compression. Space heating circuit: 28mm compression. Brine/Ambient circuit: 28mm compression.
Marking:
Company name and logo (Mitsubishi), max operating pressures, max operating temperature, capacity and other technical information on adhesive label on top of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
31/03/2027
Model:
EHWT17D-MHEDW
Product Images

Approval Holder:
Mitsubishi Electric Air Conditioning Systems Europe Ltd.
Company Name
Mitsubishi Electric Air Conditioning Systems Europe Ltd.
Address
Nettlehill Road, Houston Industrial Estate, Livingston, Scotland
Postcode
EH54 5EQ
Phone
01506 - 44 55 00
General Email
mark.fletcher@m-ace.mee.com

View All Listings by this Company
Manufacturer:
Mitsubishi Electric Air Conditioning Systems Europe Ltd.
Company Name
Mitsubishi Electric Air Conditioning Systems Europe Ltd.
Address
Nettlehill Road, Houston Industrial Estate, Livingston, Scotland
Postcode
EH54 5EQ
Phone
01506 - 44 55 00
General Email
mark.fletcher@m-ace.mee.com

View All Listings by this Company

Print This Approval


#2203703

Vacuum relief valve with a DZR brass body. Maximum working pressure 16.0 bar. Maximum operating temperature 99˚C

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2203703
Size:
½” BSP (M)
Marking:
Reliance, date of manufacture (D/WW/Y), DR and technical information on cap.
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
ADMT503001
Product Images

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2201068

A range of wall mounted self-closing shower valves (chromium plated brass), incorporating a spring loaded headwork with a dome type operating member. Model TF222CP250 is supplied with metal back nut. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2201068
Size:
15mm compression inlet and outlet:
Marking:
INTA on operating member
Installation Requirements:
R001 R040
Expiry date:
31/01/2027
Model:
TF992 CP TF99230 CP TF99730 CP TF997 CP TF222 CP 150 TF222 CP 200 TF222 CP 250
Product Images

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
Idral S.p.A.
Company Name
Idral S.p.A.
Address
Via Isei, 8/10 - I-28010 Gargallo (NO)
Country
Italy
Phone
+39 0322 912017
General Email

View All Listings by this Company

Print This Approval


#2112005

Wall mounted, bar type thermostatic shower mixer (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a dome operating member. The temperature is controlled independently via a thermostatic cartridge with a dome operating member. The outlet incorporates a single check valve cartridge assembly; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet connections incorporate an eccentric isolation valve and flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2112005
Size:
½” BSP (M)
Marking:
Delabie on body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2026
Model:
H9768TP - thermostatic mixing shower, range SECURITHERM shower

Approval Holder:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval


#2201335

Range of electronic, thermostatic mixing valves which incorporate a solenoid valve on the inlet and various outlet configurations dependant on model. All models are supplied with a user interface that controls flow and temperature. The inlets of models 1.1503.678, 1.1503.682, 1.1503.690, 1.1503.698 & 1.1621.099 incorporate a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Model 1.1503.702 – Rada Sense W KIT T3 Washbasin is supplied with a wall mounted spout outlet. Model 1.1503.706 – Rada Sense S KIT T3 Shower is supplied with a fixed shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2201335
Note:
IRN R008 only applies to the thermostatic mixing valves (not the spout & shower outlets).
Size:
Rada Sense: ½” x ½” BSP(M) inlet/outlet. Rada Outlook: ¾” x ½” BSP(M) inlet/outlet.
Marking:
Rada Sense or Rada Outlook (Rada is a brand of Kohler) on interface controller.
Installation Requirements:
R001 R008 R010 R040 R570
Expiry date:
31/01/2027
Model:
1.1503.678 – Rada Sense W T3 Washbasin. 1.1503.682 – Rada Sense S T3 shower. 1.1503.690 – Rada Sense BSM T3 Bath/shower. 1.1503.694 – Rada Sense B T3 Bidet. 1.1503.698 – Rada Sense T T3 Bath. 1.1503.702 – Rada Sense W KIT T3 Washbasin. 1.1503.706 – Rada Sense S KIT T3 Shower. 1.1621.099 – Rada Outlook (UK). 1.1621.100 – Rada Outlook (Euro). 1.1653.030 – Rada Sense SS T3 Shower.
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 215 of 816

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.