Range of expansion vessels with EPDM membrane and stainless steel flange connections. Maximum working pressure of 10.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

WRAS Approval Number:

2110388

Note:

Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum

Size:

½” BSP (M), ¾” BSP (M) & 1” BSP (M)

Marking:

Aquasystem & technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

XVES050020, 5L VERTICAL POT VESSEL WHITE PRE-SET 3.0 XVES050030, 8L VERTICAL POT VESSEL WHITE PRE-SET 3.0 XVES050031, 8L VERT POT VESSEL WHITE 3.5B XVES050036, 8L POT VESSEL INTER BRACKET PRE-SET 3.5 XVES050040, 12L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050041, 12L VERT POT VESSEL WHITE 3.5B XVES050042, 12L VERT POT VESSEL WHITE 2.2B XVES050045, 12L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050046, 12L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050047, 12L POTABLE VESSEL 4BAR W/ INT BRACKET XVES050050, 18L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050051, 18L VERT POT VESSEL WHITE 3.5B XVES050052, 18L VERT POT VESSEL WHITE 2.2B XVES050055, 18L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050056, 18L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050057, 18L POTABLE VESSEL 4.0BAR W/ BRACKET XVES050060, 24L VER POT VESSEL WHITE PRE-SET 3.0 XVES050061, 24L VERT POT VESSEL WHITE 3.5B XVES050062, 24L VERT POT VESSEL WHITE 2.2B XVES050065, 24L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050066, 24L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050067, 24L POTABLE VESSEL 4.0BAR W/ BRACKET XVES050075, 35L VERT POT VES WHITE PRE 3BAR C/W BRK XVES050080, 50L VERTICAL POT VESSEL BLUE PRE-SET 3.0

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd

Company Name

Reliance Worldwide Corporation (UK) Ltd

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Filling loop assemblies consisting of a brass bodied spherical valve, stainless steel braided EPDM lined flexible hose (051603F-BAGR4 model) or copper pipe (0516-ATAGBAG model) and a combined double check valve assembly incorporating a spherical valve with a DZR brass body, verified by test (suitable for backflow protection against Fluid Category 3). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

1015 Filling Loop

Size:

3/8” captive nut.

Marking:

Airaga Logo, flow arrow, CR and date of manufacture (YYWW) on double check valve body. Airaga logo and date of manufacture (YYWW) on isolation valve.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

051603F-BAGR4 0516-ATGBAG

Approval Holder:

Airaga Rubinetterie Spa

Company Name

Airaga Rubinetterie Spa

Address

Via Per Briga 42 28024 Gozzano Novara

Country

Italy

View All Listings by this Company

Manufacturer:

Airaga Rubinetterie Spa

Company Name

Airaga Rubinetterie Spa

Address

Via Per Briga 42 28024 Gozzano Novara

Country

Italy

View All Listings by this Company

Filling loop assemblies comprising of a stainless steel braided, EPDM lined hose, double check valve assembly with isolation valve verified by test (suitable for backflow protection against fluid category 3) and either a straight or tee isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:

1015 Filling Loop

Size:

15mm compression inlet/outlet

Marking:

WRAS, date of manufacture (YYYY) and YAOYAO on crimp connection of hose. CR and flow arrow on double check valve assembly.

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

YY-SS-E6-01 (straight isolation valve). YY-SS-E6-02 (tee isolation valve).

Approval Holder:

Taizhou Yaoyao Metal Hose Co., Ltd.

Company Name

Taizhou Yaoyao Metal Hose Co., Ltd.

Address

Qinggang Industrial Zone Yuhuan Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Taizhou Yaoyao Metal Hose Co., Ltd.

Company Name

Taizhou Yaoyao Metal Hose Co., Ltd.

Address

Qinggang Industrial Zone Yuhuan Zhejiang

Country

China

View All Listings by this Company

‘Profine’ plastic bodied filter head incorporating EPDM ‘O’-rings for use with filter cartridges (not supplied).For use with LLDPE tube (manufactured to DIN 8072). All models can be specified with or without an integral bracket. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1050 Filters and Housings

WRAS Approval Number:

2107305

Note:

Intended for use with 33.65mm OD: Cartridge Profine Blue, Silver, Violet, Lilac and Ocra. Approved separately.

Size:

All models: ¼” pushfit inlet/outlet. ⅜” pushfit inlet/outlet. 8mm pushfit inlet/outlet. 10mm pushfit inlet/outlet.

Marking:

Profine by Think Water on body.

Installation Requirements:

R001 R008 R150

Expiry date:

31/07/2026

Model:

1100322 (parallel flow), 1100323 (in series flow), 1100324 (one side flow), 1100325 (in series reverse flow).

Approval Holder:

Think Water Srl

Company Name

Think Water Srl

Address

Via Delle Pezze 35 Cittadella (PD)

Postcode

35013

Country

Italy

Phone

(+39) 049 9403792

General Email

riccardo.favero@thinkwater.com

View All Listings by this Company

Manufacturer:

Think Water Srl

Company Name

Think Water Srl

Address

Via Delle Pezze 35 Cittadella (PD)

Postcode

35013

Country

Italy

Phone

(+39) 049 9403792

General Email

riccardo.favero@thinkwater.com

View All Listings by this Company

Range of water filter housings with plastic heads and bodies (various colours - see model), incorporating NBR ‘O’-rings (158087/088/207/208/218/219/261 models only) or with EPDM ‘O’-rings (all other models). Big Blue for Cartridges - Maximum working pressure 6.9 bar (10” filter housings) and 6.2 bar (20” filter housings). Maximum working temp 38°C. All other models - Maximum working pressure 8.62 bar. Maximum working temp 52°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2111021

Note:

IRN R008 applies to products with “CLEAR” or “CL” in model code only. This approval does not include the filter media intended for use with this product.

Size:

Standard Housings & 3G Standard models: ¾” BSP (F) Big Blue for cartridges 150253/254/257/258 models: 1½” BSP (F). Big Blue for cartridges 150262/263/272/273 models: 1” BSP (F). Slim Line models: ½” BSP (F), except for; Slim Line 158085/086/158087/087/121/122/261 models: ⅜” BSP (F). 3G Slim Line models: ½” BSP (F), except for; 3G Slim Line 158632 model: ⅜” BSP (F). Black Housings 150670/674 models: ¾” BSP (F). Big Blue for Cartridges (Black) Housings 150675/676 models: 1” BSP (F).

Marking:

PENTAIR on adhesive label on body

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

30/11/2026

Model:

Product Family: Standard Housings (Black filter head and blue filter housing). 150102: #10 BL W/PR,BT,MB CAP(EX) 12/C. 150103: #10 BL WO/PR,BT,MB CAP(EX) 12/C. 150104: #20 BL W/PR,BT,MB CAP(EX) 8/C. 150105: #20 BL WO/PR,BT,MB CAP(EX) 8/C. Product Family: Black Housings (Black filter head and black filter housing). 150670: #10 BK&BK MB BSP CAP. 150674: #20 STD BK/BK MB BSP W/PR 8/C. Product Family: 3G Standard (Black filter head and blue filter housing). 150543: #10 3G-ST BK/BL 3/4"BT MB W/PR. 150545: #20 3G-ST BK/BL 3/4"BT MB W/PR. 150549: #20 3G-ST BK/BL 3/4"BT MB. 150551: #10 3G-ST BK/BL 3/4"BT IB W/PR. 150553: #20 3G-ST BK/BL 3/4"BT IB W/PR. Product Family: Big Blue for Cartridges (Black filter head and blue filter housing). 150253: 20"BIG BL,BTHFPP W/PR,1.5" 4/C. 150254: 20"BIG BL,BTHFPP WO/PR,1.5" 4/C. 150257: BIG BL,BT HFPP W/PR,1-1/2" 6/C. 150258: BIG BL,BT HFPP WO/PR,1-1/2" 6/C. 150262: #10 BB BK/BL 1" BT W/PR 6/C. 150263: BIG BL,BT HFPP WO/PR,1"(EX) 6/C. 150273: 20"BIG BL,BT HFPP W/PR,1" 4/C. 150274: 20"BIG BL,BT HFPP WO/PR,1" 4/C. Product Family: Big Blue for Cartridges (Black) (Black filter head and black filter housing). 150675: #20 BB BK/BK 1" BSP W/PR 4/C. 150676: #10 BB BK/BK 1" BSP W/PR 6/C*O. Product family: Slim Line BL/CL 5” (Blue filter head and clear filter housing). 158121: 3/8"#5 CLEAR W/PR,BT (EX) 12/C. 158122: 3/8"#5 CL WO/PR,BT (EX) 12/C. 158240: 1/2"#5 CLEAR W/PR,BT (EX) 12/C. 158241: 1/2"#5 CL WO/PR,BT (EX) 12/C. Product family: Slim Line BL/CL 10” (Blue filter head and clear filter housing). 158218: 1/2''SL CLEAR W/PR;BT (EX) 12/C. 158219: 1/2''SL CL WO/PR;BT (EX) 12/C. Product family: Slim Line BK/BL (Black filter head and blue filter housing). 158085: #5 BLUE W/PR BT (EX) 12/C. 158086: #5 BLUE WO/PR BT (EX) 12/C. 158087: #10 SL BK/BL 3/8' W/PR BT 12/C. 158088: #10 SL BLUE WO/PR;BT(EX) 12/C. 158207: 1/2"#10 SL BL W/PR,BT(EX) 12/C. 158208: 1/2"SL BLUE WO/PR,BT (EX) 12/C. 158210: 1/2" #5 BLUE W/PR BT (EX) 12/C. 158211: 1/2"#5 BLUE WO/PR BT (EX) 12/C. Product family: Slim Line White (White filter head and white filter housing). 158261: #10 SL WH/WH 3/8' W/O PR BT12/C. Product Family: 3G Slim Line BK/BL (Black filter head and blue filter housing). 158588: #10 3G-SL BK/BL 1/2"BT MB W/PR. 158589: #10 3G-SL BK/BL 1/2" BT MB. 158628: #10 3G-SL BK/BL 1/2"BT IB W/PR. 158632: #10 3G-SL BK/BL 3/8"BT IB W/PR. Product Family: 3G Slim Line BL/CL (Blue filter head and clear filter housing). 158590: #10 3G-SL BL/CL 1/2"BT MB W/PR. 158630: #10 3G-SL BL/CL 1/2'BT IB W/PR. 158631: #10 3G-SL BL/CL 1/2"BT IB 12/C.

Approval Holder:

Pentair International

Company Name

Pentair International

Address

Avenue de Sevelin 18 1004 Lausanne Switzerland

General Email

info@pentair.com

View All Listings by this Company

Manufacturer:

Pentair International

Company Name

Pentair International

Address

Avenue de Sevelin 18 1004 Lausanne Switzerland

General Email

info@pentair.com

View All Listings by this Company

‘HE-705X & HE-715X’ ranges of brass crimp fit fittings incorporating EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057-2006). HE-7052/7053/7058/7059 & HE-7152/7153/7158/7159 models also incorporate a NBR gasket. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2109058

Size:

See model

Marking:

HONGEN, WRAS and size on crimp connection.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

M-type connection: HE-7050 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7051 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7052 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7053 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7054 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7055 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7056 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7057 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7058 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7059 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”. V-type connection: HE-7150 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7151 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7152 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7153 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7154 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7155 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7156 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7157 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7158 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7159 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”.

Approval Holder:

YUHUAN HONGEN VALVE CO., LTD

Company Name

YUHUAN HONGEN VALVE CO., LTD

Address

Sanliancun, 317605, Yuhuan, Zhejiang, China

View All Listings by this Company

Manufacturer:

YUHUAN HONGEN VALVE CO., LTD

Company Name

YUHUAN HONGEN VALVE CO., LTD

Address

Sanliancun, 317605, Yuhuan, Zhejiang, China

View All Listings by this Company

VSH XPRESS Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106049

Size:

12mm - 108mm.

Marking:

DVGW, XPRESS & SIZE ON BODY

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

7001 22, 7002 22, 7001 15, 7002 15, 7040 22, 7130 15 & 7130 22 PRESS FITTINGS 6270 Copper Press Coupling: 12 - 108mm. 6271 Copper Press Coupling: 12 - 54mm. 6240 Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001 Bend 90° x press: 12-108mm. 6002 Bend 90° press x press: 12 - 108mm. 6130 Equal Tee 3 x press: 12 - 108mm. 6040 Bend 45° x press: 12 - 108mm. 6041 Bend 45° press x press: 12 - 108mm. 6301 Endcap press: 12 - 108mm. 6131 Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 Flange PN16: 76.1mm.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of PVC-u solvent weld and threaded union fittings incorporating an EPDM ‘O’-ring. For use with PVC-u pipe manufactured to ISO 1452 and DIN 8063. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201016

Note:

This approval does not include solvent cement.

Size:

See model.

Marking:

ERA® (registered trademark of Yonggao Co. Ltd.), size and PN on nut.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Union UU001: 20mm-110mm Male Union UU002: 20mm-63mm x ¼”-2” BSP (F)

Approval Holder:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

‘Xpress’ range of press fit fittings with copper or brass bodies and EPDM ‘O’-rings. For use with copper tube manufactured to EN1057. For above ground ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201304

Size:

see model

Marking:

Brass fittings: Xpress and size on body. Copper fittings: Xpress, size and Kitemark logo on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Code Sl/7270 Sl/72705 SlR/7240 56/7243 S12/7002A S12S/7001A S2/6270G S3/6243G S7/6246G S8/6280G Description Straight coupling Straight coupling slip pattern Straight reducing coupling Reducer Elbow Street elbow Straight female connector Straight male connector Female adaptor Male Adaptor Sizes 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -64mm 15mm -108mm 15mm -54mm 15mm-42mm Copper/ Copper Copper Copper Copper Copper Copper Gunmetal Gunmetal Gunmetal Gunmetal S11/6330 S13/6092G S14/6090G Union coupling Male elbow Female elbow 15mm -54mm 15mm -54mm 15mm -54mm Gunmetal Gunmetal Gunmetal S15/6472G Backplate elbow 15mm - 22mm Gunmetal SlFMF/7510 Composite female metric flange 67mm -108mm Copper SlFMM/7520 Composite female metric flange 67mm -108mm Copper S12R/7002A S15L/6472L Reducing Elbow Elbow 22mm x 15mm ½” and 3/4" Copper Gunmetal 519/7005 Bend 15mm-28mm Copper 521/7041 Obtuse Elbow 12mm-108mm Copper 5215/7040 Obtuse Street Elbow 12mm-108mm Copper 522/7086 Partial Crossover 15, 18 and 22mm Copper 5225/7087 Crossover 15, 18 and 22mm Copper 523/7085 Full Crossover 15, 18 and 22mm Copper 524/7130 Equal Tee 12mm-108mm Copper 525/7130 Tee Reducer Branch 15mm-108mm Copper 526/7130 Tee One End Reducer 15mm-35mm Copper 526/7130 Tee One End And Branch Reducer 15mm-54mm Copper 528/7130 S30/130G 560/7301 Tee Both Ends Reducer Female Branch Tee Stop End 12mm-28mm 12mm-108mm 35mm-54mm Copper Gunmetal Copper 561/7301 Stop End 12mm-108mm Copper S65F/6096G Elbow 12mm-54mm Gunmetal S68FF/6359 S69/6331G S69F/6330G Union Straight Male Union Connector Straight Female Union Connector 15mm-54mm 12mm-54mm 12mm-54mm Gunmetal Gunmetal Gunmetal

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Low profile mechanical seal intended for the internal repair of pipe joints. The system incorporates two stainless steel compression rings and an EPDM seal. For above and below ground use. Maximum working pressure 22.5 bar. Cold water use only.

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2111030

Size:

DN600

Marking:

Amex-10 printed on inside of seal and clamp.

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

AMEX-10 SEAL

Approval Holder:

Planned Maintenance (Pennine) Ltd

Company Name

Planned Maintenance (Pennine) Ltd

Address

Bentley Wood Way Burnley

Postcode

BB11 5ST

View All Listings by this Company