Directory Search Results

Print List

#250115016

Range of (chrome plated) plastic shower handsets, each supplied with five (optional) plastic flow regulators (x2 blue, light green, dark green and grey). Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250115016
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP (M).
Marking:
Inta logo on body
Installation Requirements:
R001 R040
Expiry date:
31/01/2030
Model:
HS1007CP IX100007XX IX100008CP IX100009CP

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#250602011

Range of overhead shower outlets (ABS plastic - various finishes), incorporating a stainless-steel strainer. Open outlet use only Maximum operating temperature 60.0°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250602011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP (F)
Marking:
Villeroy & Boch on side of body
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
A957328xx Where xx denotes the finish, and can be replaced with either of the following: AA – Chrome XG – Silk Black
Product Images

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#250602028

Range of wall or ceiling mounted shower outlets with chromium plated bodies (or black body for 22123KF0) consisting of showers arms and shower head for installation with specific rough-in sets. Shower head bodies incorporate approved single check valve cartridges, however, the complete assemblies have not been tested to demonstrate it provides backflow protection. The 26.484 model rough-in set incorporates a plastic flow regulator on the inlet. Maximum working pressure: Open Outlet. Maximum operating temperature: 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250602028
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Any flow rates claimed by the manufacturer have not been verified
Size:
½” BSP (F).
Marking:
Showerheads: Grohe on face. Concealed bodies: Grohe, Date of manufacture (YYMMDD), Made in Germany on adhesive label inside plastic shell, Grohe, DR and Flow arrows on brass body.
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
Grohe ‘RSH’ Cosmopolitan 310’ headshower sets 400mm: 26.475.xxx & 26.479.xxx. Grohe ‘RSH’ Smart Active 310’ headshower sets 400mm: 22123KF0 Concealed bodies (rough-in sets): 26.483 & 26.484 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise LS0 – moon white A00 – hard graphite
Product Images

Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval


#2311106

Range of ‘Y’-pattern strainers with a DZR brass body, stainless-steel strainer and PTFE gasket. Maximum operating pressure 20.0 bar. BS6920 85°C.

Section:
1715 Strainers
Size:
½” - 2” BSPT (F) or BSPP (F) or NPT (F).
Marking:
Size, Pressure rating, CR, flow direction arrow on body. Crane, Pressure & temperature and product info on data plate.
Installation Requirements:
R001
Expiry date:
30/11/2028
Model:
D296A - DZR Brass

Approval Holder:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval


#241202076

Range of In-line ‘Y’ patterned strainer with ductile iron bodies (blue epoxy powder coated) and stainless-steel screens. Maximum working pressure 16.0 bar. Maximum operating temperature 85ºC.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN40-DN300 Flanged.
Marking:
FGV and flow arrow on body. Size, PN and temperature on label plate.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
FGV Y STRAINER 7302

Approval Holder:
FGV International Ltd
Company Name
FGV International Ltd
Address
87, CALDERSTONE ROAD, BRAMTON ON
Country
Canada

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2073 of 2345

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.