Directory Search Results

Print List

#251102716

Excelsior Range of Direct and indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided Maximum working pressure: 5.5 Bar (All Circuits) Maximum operating temperature 90.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Sizes can be any of the following for all models: Cold Inlet: 22mm stub, 28mm stub, ¾” BSP (F) or 1” BSP (F) Primary and heat pump circuits: 22mm stub, 28mm stub, 32mm stub, ¾” BSP (F), 1” BSP (F) or 1 ¼” BSP (F) Hot Outlet: 22mm stub, 28mm stub, ¾” BSP (F) or 1” BSP (F) Secondary circulation circuit: ½” BSP (F) or ¾” BSP (F)
Marking:
Fabdec, model name, max pressure, max temp, capacity and other technical information on label on body.
Installation Requirements:
R001
Expiry date:
30/11/2030
Model:
Model (Available Capacity (L)) WDE-D2 (80, 100, 130 ,150, 175, 215, 305, 400& 500L) WDE-C1(80, 100, 130 ,150, 175, 215, 305, 400& 500L) WS-C1 (130, 150, 175, 215, 305, 400 & 500 L) WS-C2 (130, 150, 175, 215, 305, 400 & 500 L) WHP-C1 (150, 175, 215, 305, 400 & 500L) WHP-C2 (150, 175, 215, 305, 400 & 500L) WT-D2F5 (100, 130, 150, 175 & 210L) WT-C1F5 (100, 130, 150, 175 & 210L) WT-D2F4 (80, 100, 130, 150 & 165L) WT-C1F4 (80, 100, 130, 150 & 165L) WTR-C2F5 (100, 130, 150, 175 & 210L) WB (Buffer Vessel Only)

Approval Holder:
Fabdec Ltd
Company Name
Fabdec Ltd
Address
Grange Road Ellesmere Shropshire
Postcode
SY12 9DG

View All Listings by this Company

Print This Approval


#251102304

Section:
2000 Shower Valves
Description:
A Shower valve(s) with manual temperature control.
Wall mounted. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
71 681 xx0Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finishG 1/2 (offset)10 bar70 °Chansgroheon the handleYesCeramic cartridgeNot Applicable

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturers:
Hansgrohe d.o.o.

Print This Approval


#251115308

Section:
2000 Shower Valves
Description:
A Shower valve(s) with manual temperature control.
Wall mounted. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
86005640Chrome15mm compression joint10 bar80 °CTRITON,86005640Handle/ bodyNoCeramic cartridge
Product Images

Approval Holder:
Guangzhou IAPMO Laboratory Co. Ltd
Company Name
Guangzhou IAPMO Laboratory Co. Ltd
Address
No.201, Building A, Yushu Industrial Park Science City Huangpu District Guangzhou
Country
China
General Email
Qiunan.Liang@iapmortl.org

View All Listings by this Company
Manufacturers:
Xiamen Fotec Sanitary Ware Co., Ltd.

Print This Approval


#251102041

Wall mounted, concealed shower valve (brass bodies – various finishes) incorporating a ceramic cartridge headwork with single lever operating members and a manual diverter to shower outlets with a single lever operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
251102041
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Grohe Spa on backplate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030
Model:
24.340.xxx Must be installed with rough-in set 35.600 or 35.604. Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Super steel AL0 – Brushed hard graphite

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2210393

Range of wall mounted, bar type thermostatic blending valves incorporating a quarter turn ceramic disc headwork or half turn ceramic diverter controlling the flow between outlets. The temperature is controlled by a thermostatic cartridge with various type of operating members incorporating a manual override button. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2210393
Size:
¾” BSP (M) x ½” BSP (M) offset union.
Marking:
LECICO on body.
Installation Requirements:
R001 R040
Expiry date:
31/10/2027
Model:
SHRATSMKCH SHRATSMKMB SHRATSMKBG SHRATSMKGM SHZATHKITMB SHZATHKITBG SHZATHKITGM TPTHERMOBSM
Product Images

Approval Holder:
LECICO Plc.
Company Name
LECICO Plc.
Address
2D VIKING INDUSTRIAL ESTATE HUDSON ROAD BEDFORD
Postcode
MK410QB
General Email
jrichards@lecico.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2040 of 2060

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.