Range of copper brazed, stainless steel heat exchangers. Available with between 4 – 70 plates (see models). Maximum working pressure: 16.0 bar. Maximum operating temperature: 99°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

SWEO and product info on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

E5T Number of plates minimum: 6 Number of plates maximum: 48 No connection type or ¾” BSP (M) E5AS Number of plates minimum: 4 Number of plates maximum: 40 No connection type or ¾” BSP (M) E5K Number of plates minimum: 8 Number of plates maximum: 40 No connection E6T Number of plates minimum: 4 Number of plates maximum: 40 No connection type, ½” or ¾” BSP (M) E8T Number of plates minimum: 4 Number of plates maximum: 40 No connection type, ½” or ¾” BSP (M) E8AS Number of plates minimum: 4 Number of plates maximum: 46 No connection type or ¾” BSP (M) E8LAS Number of plates minimum 10 Number of plates maximum: 70 No connection, ¾” or 1” BSP (M)

Product Images

Approval Holder:

SWEP International AB

Company Name

SWEP International AB

Address

Järvgatan 3B, Box 105, 26122 Landskrona

Country

Sweden

View All Listings by this Company

Range of indirect heat interface units (HIU) providing heating and instantaneous hot water. The central heating and hot water is generated via plate heat exchangers. Maximum operating pressure 10 bar (primary and DHW secondary). Maximum operating pressure 2.5 bar CH secondary Maximum operating temperature 90°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241104709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression

Marking:

Bosch on front panel and technical info on adhesive label.

Installation Requirements:

R001 R140 R360

Expiry date:

30/11/2029

Model:

7-735-600-739 - Flow 8500 40, 7-735-600-740 - Flow 8500 40 H, 7-735-600-741 - Flow 8500 50, 7-735-600-742 - Flow 8500 50 H, 7-735-600-743 - Flow 8500 60, 7-735-600-744 - Flow 8500 60 H.

Product Images

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Range of water meters with epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

2½” BSP (M) connection. DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300 flanged connections.

Marking:

Resideo & Technical information on face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

EW1710AC5000 EW1710AC5600 EW1710AC6500 EW1710AC7300 EW1710AC8100 EW1710AC8500 EW1710AC8900 EW1710AC9100 EW1710AC9200

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

SJC range of water meters with brass bodies and plastic turbines. The inlet incorporates a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

¾” BSP (M) inlet/outlet (DN15). 1” BSP (M) inlet/outlet (DN20). 1¼” BSP (M) inlet/outlet (DN25). 1½” BSP (M) inlet/outlet (DN32) 2” BSP (M) inlet/outlet (DN40)

Marking:

Aquamotion, year of manufacture (yy), Model & technical info on dial facer. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

SJC

Approval Holder:

Aquamotion

Company Name

Aquamotion

Address

Unit 7 Woodland Close Mansfield Nottinghamshire

Postcode

NG21 9BF

Country

United Kingdom

Phone

01623 664030

General Email

info@aqua-motion.co.uk

View All Listings by this Company

Range of water meter manifolds with plastic bodies for use with PE80 pipe (manufactured to BS EN 12201). The inlets incorporate a spherical valve and a check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

25mm & 32mm pushfit

Marking:

Atplas logo on body.

Installation Requirements:

R001 R008

Expiry date:

30/11/2029

Model:

MB57425DU Matrix. MB5743225DU Matrix. MB5743232DU Matrix. MB57432DU Matrix. MB5743225DDCV Matrix.

Product Images

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company