Five-hole, single outlet (fixed) combination tap assembly with brass bodies (various finishes), incorporating a quarter turn ceramic disc headworks to control the flow and a manual diverter to shower outlet both with single lever operating members. The spout outlet incorporates an aerator. The product is supplied with a pull out shower hose and shower handset, metal backnuts and stainless steel braided, EPDM lined interconnecting hoses. The handset also incorporates an approved single check valve, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0673 Combination Tap Assemblies

Section Subtitle:

Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.

WRAS Approval Number:

250708012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M).

Marking:

Coalbrook logo on hand set and on rear of hand set holster.

Installation Requirements:

R001 R006 R020

Expiry date:

31/07/2030

Model:

XX 2000 YY. XX denotes the trim, the number of letters will depend on the name of the trim. Examples are but not limited to: BA-Bank, DO-Domo, DC-Decca & ZU-Zurich. The numbers are a numerical and will remain constant. YY denotes the finish, examples are but not limited to BN-Brushed nickel, CP-Chrome, GM-Gunmetal & BB-Brushed brass.

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (black or chrome plated brass). The flow is controlled via solenoid valve which is actuated by an infra-red sensor and the temperature is controlled independently via a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

0685 Combination Tap Assembly

Section Subtitle:

Tap(s) with a non-touch method of flow control incorporating temperature control.

WRAS Approval Number:

250302024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For use with copper pipe Manufactured to BS EN 1057

Size:

See models.

Marking:

Delabie on spout

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/03/2030

Model:

388035 - 3/8" BSP (M) 398035- 3/8" BSP (M) 488035 - 3/8" BSP (M) 498035 - 3/8" BSP (M) 388MCHB - 3/8" BSP (M) 398MCHB - 3/8" BSP (M) 488MCHB - 3/8" BSP (M) 498MCHB - 3/8" BSP (M) 38801515 – 15mm compression 39801515 – 15mm compression 48801515 – 15mm compression 49801515 – 15mm compression 388MCHLH15 – 15mm compression 398MCHLH15 – 15mm compression 488MCHLH15 – 15mm compression 498MCHLH15 – 15mm compression 378MCH15 - 3/8" BSP (M) 37801515 – 15mm compression 378MCHB- 3/8" BSP (F) 378035 - 3/8" BSP (M)

Product Images

Manufacturer:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

View All Listings by this Company

Range of ceiling and wall mounted shower arms with brass bodies (various finishes). Open outlet use only. Maximum operating temperature 85°C.

Section:

1670 Shower Outlets

Section Subtitle:

Shower kit(s)

WRAS Approval Number:

250708009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” Male BSP.

Marking:

Coalbrook (Davroc brand) logo on the arm close to the threaded arm.

Installation Requirements:

R001 R040

Expiry date:

31/07/2030

Model:

XX4005YY - 275mm ceiling arm, XX4006YY - Wall arm, XX4007YY - 100mm ceiling arm. XX denotes the trim and can be replaced with but not limited to: CO – Coalbrook. Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of non-verifiable double check valve assemblies, consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies, models AI-903215, Al-903222 & AI-903228 are chrome plated. Maximum working pressures: AI-903215, AI-903222 & AI-903020 16 bar. AI-903032, AI-903040 & AI-903050 10 bar. Maximum operating temperature 60°C Added September 2025 Maximum working pressure 10 Bar (AI-903025) Maximum working pressure 16 Bar (AI-903228) Maximum operating temperature 85°C

Section:

0034 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.

WRAS Approval Number:

250302709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

AI-903215, AI-903222 Airaga logo, CR, eco fil & flow arrow on body. Size on nut. AI-903020: Altecnic logo, flow arrow, size, pressure & CR on body. AI-903032, AI-903040 & AI-903050: Airaga logo, Eco fil, CR, size, flow arrow and made in Italy on body Marking added September 2025: AI-903228 – Airaga logo, flow arrow, CR on body AI-903025 – Altecnic logo, flow arrow, CR, size on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

AI-903215 (15mm compression inlet/outlet) AI-903222 (22mm compression inlet/outlet) AI-903020 (¾” BSP (F) inlet/outlet) Model added June 2025: AI-903015 (1/2" BSP (F) inlet/outlet Models added June 2025: AI-903032 1 ¼” BSP (F) inlet/outlet, AI-903040 1½” BSP (F) inlet/outlet, AI-903050 2” BSP (F) inlet/outlet. Models added September 2025: AI-903228, 28mm compression inlet/outlet AI-903025, 1” BSP F inlet/outlet

Product Images

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Range of non-rising spindle headworks with brass bodies. For insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

0440 Headworks

Section Subtitle:

Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.

WRAS Approval Number:

250315001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

AVONFLOW, WRAS and manufacturing date (DD/MM/YYYY) on body.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

CL39029H054A0, CL2906TA044BW, TC51V2.

Product Images

Approval Holder:

Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name

Jiangxi Avonflow Hvac Tech Co., Ltd

Address

No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province

Country

China

View All Listings by this Company

Manufacturer:

Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name

Jiangxi Avonflow Hvac Tech Co., Ltd

Address

No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province

Country

China

View All Listings by this Company