Equilibrium float valve with brass body, brass float arm and EPDM seals. Float not supplied and not covered under the scope of this approval. Maximum working pressure 10.0 Bar Cold water use only

Section:

2100 Valves

Section Subtitle:

Float operated, equilibrium, metal.

WRAS Approval Number:

250602713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Float not supplied and not covered under the scope of this approval.

Size:

¾” - 2" BSP (M)

Marking:

PCO FLO, size and install line on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

PCO-FLO Equilbrium float valve range: BV-EQ/0.75PCO, BV-EQ/1.PCO, BV-EQ/114PCO, BV-EQ/112PCO, BV-EQ/2PCO.

Approval Holder:

Decca Plastics UK Ltd.

Company Name

Decca Plastics UK Ltd.

Address

Victoria Mill, Lincoln Street, Preston

Postcode

PR1 6RE

Country

Lancashire

Phone

+44 (0) 1772 725 757

View All Listings by this Company

Range of spring loaded, resilient trim, non-return valves with, stainless steel bodies and plunger with EPDM seals. Maximum working pressure 16.0 bar. Cold water use only.

Section:

2185 Valves

Section Subtitle:

Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection.

WRAS Approval Number:

250602711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¼” - 4” BSP (F)

Marking:

Mondeo, flow arrow, size, pressure and date of manufacture (DD/MM/YY) on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Small DW 900103A 900106A 900110A 900112A 900117A 900120A Idrja DW 900010A 900400A 900015A 900410A 900020A 900420A 900025A 900430A 900028A 900440A 900056A 900451A 900461A 900471A Idrja DW MFA 900017MFA 900022MFA 900027MFA 900030MFA 900017FMA 900022FMA

Manufacturer:

Mondeo Srl.

Company Name

Mondeo Srl.

Address

STRADA DEL CAPITELLO SN MONTECCHIO MAGGIORE

Country

Italy

View All Listings by this Company

Range of pilot operated pressure reducing control valves with blue or grey epoxy coated ductile steel bodies. Maximum supply pressure: 20.0 bar. The product is available with the following adjustable outlet pressures: between 1.0 and 7.0 bar or between 4.0 and 12.0 bar. Maximum operating temperature: 85°C.

Section:

2205 Valves

Section Subtitle:

Pressure reducing, pilot operated.

WRAS Approval Number:

250604709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

‘XX’ Denotes: Flanged size – DN50 (50), DN65 (65), DN80 (80), DN100 (100), DN150 (150). DN200 (200), DN250 (250), DN300 (300).

Marking:

Z-Tide, size, flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

W-BFR-DS-XX, W-BFR-CS-XX, W-BFR-S-XX.

Product Images

Approval Holder:

Elite Line Industrial Corporation.

Company Name

Elite Line Industrial Corporation.

Address

No.40, Jialing Str., Cianjhen District, Kaohsiung 80656

Country

Taiwan R.O.C.

Phone

+886 7 3311060

General Email

sales@z-tide.com

View All Listings by this Company

Range of pre-set pressure relief valves with brass or DZR brass bodies and EPDM diaphragms. The valves are fitted with hand operated easing gear. Pre-set pressure 3.0 bar for all models. Maximum operating temperature 85°C.

Section:

2210 Valves

Section Subtitle:

Pressure relief.

WRAS Approval Number:

251008701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Caleffi logo, flow arrow, PN and size on the body. CR on DZR brass version.

Installation Requirements:

R001 R200

Expiry date:

31/10/2030

Proviso:

For closed circuit use only.

Model:

A312012 CST 19.9 mm manifold fast fit x ½” BSP (F), A312400 CST 17.6 mm manifold fast fit x ½ BSP (F), A312401 CST 19.9 mm manifold fast fit x ½” BSP (F), A312413 WSC 19.8 mm manifold fast fit x ½” BSP (F), A312414 CST 19.9 mm manifold fast fit x ½ BSP (M), A312420 CST 22 mm manifold fast fit, A312420 OEM 22 mm manifold fast fit x ½” BSP (F), A312430 CST ½” BSP (M) x ½” BSP (M), A312438 CST 19.9 mm manifold fast fit x ½” BSP (M), A312439 CST 19.9 mm manifold fast fit x ½” BSP (F) (DZR), A314402 BSC ½” BSP (M) x ½” BSP (F), A314437 CST ½” BSP (M) x 15mm compression, A313001 FRQ 17 mm manifold fast fit, A314432 CST ½” BSP (M) x ½” BSP (F).

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Range of normally closed (NC), solenoid valves with plastic bodies and EPDM diaphragm. Models with push-fit connections are for use with copper pipe (manufactured to EN 1057) and PTFE pipe. The products incorporate a plastic or stainless steel filter on the inlet, (except for models with swivel nut, push-fit and nozzle inlets, as well as the 44.007.126 and 01.021.126 models) . The 44.007.126 model incorporates a Y-pattern stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperatures: Cold water use only, 65°C or 90°C for models marked with ℗ - Please consult model section for further details.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

250404711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

AuK Muller, type (model), voltage, maximum water temperature (Tm 23°C, 65°C or 90°C as appropriate), date of manufacture WW/YY on adhesive label on coil. AuK Muller logo, flow arrow, pressure rating and model moulded on body. Models suitable for 90°C are also marked with a ℗ on the base of the body.

Installation Requirements:

R001 R008

Expiry date:

30/04/2030

Model:

Cold water use only models: 01.007.115: Inlet: G 3/8” (M), 01.021.126: Inlet: G 1” (M). 65°C models: 01.007.111: Inlet: G 1/2” (M); G 3/8”(M); G 3/4” (M), 01.007.115: Inlet: G 3/4” (M), 01.007.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Push-Fit; Ø 8 Push-Fit, 44.007.126: Inlet: G 1/2” (M); G 3/4” (M), 29.007.215: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M), 01.010.115: Inlet: G 3/4" (M), 01.010.125: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Nozzle; 3/8” Push-Fit; G 3/4” (F) ; 3/4-11,5 NH (F); G 1/2” (F), 01.010.215: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.216: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.315: Inlet: G 3/4” (M), 01.010.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.415: Inlet: G 3/4” (M), 01.010.425: Inlet: G 3/4” (M), 29.010.226: Inlet: G 3/4” (M), 29.010.326: Inlet: G 3/4” (M), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); 3/4-11,5 NH (M), 01.013.215: Inlet: G 3/4” (M), 01.013.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.017.126: Inlet: G 3/4” (M, 15.017.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 15.017.425: Inlet: G 3/4” (M); 3/4-11,5 NH (M). 90°C models (marked with a ℗): 01.010.115: Inlet: G 1/2” (M); G 3/4 (M), 01.010.125: Inlet: G 3/4” (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F); G 1/2” (F), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F), 01.017.115: Inlet: G 3/4” (M), 01.017.126: Inlet: G 3/4” (M); 3/4-11,5 NH (M).

Approval Holder:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Ranges of solenoid valves with plastic bodies and stainless steel strainer. Models with female connections incorporate a stainless steel threaded connector. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

250404715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP (M), 3/8” BSP (F), ½” BSP (M,) ½” BSP (F).

Marking:

AuK Muller logo, flow arrow, type and date clock (MM/YY) moulded on body. AuK Muller & logo, type, voltage, DN, pressure rating, B – (Bistable) and date of manufacture (WW/YY) on adhesive label on body.

Installation Requirements:

R001 R008

Expiry date:

30/04/2030

Model:

50.005.126

Approval Holder:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Range of spherical valves with brass or DZR brass bodies, chromium plated brass or chromium plated DZR brass (12-18mm) or stainless-steel balls (22-54mm) and various operating members The press-fit connection is for use with copper pipes (manufactured to EN 1057), stainless steel pipes (manufactured to EN10312) or carbon steel pipes (manufactured to EN10305-3). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250515015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

12-54mm press-fit.

Marking:

Pressure, Size & CR on body. Crane logo, Pressure Model and product info on lever or lockshield cap.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Crane D172A.PF - Lever handle. Crane D172AEXS.PF – Lever handle with extension stem. Crane D172ALS.PF- Lockshield handle. Crane D172AT.PF – T- handle

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of spherical valves with brass or DZR brass bodies, chromium plated brass or chromium plated DZR brass (12-18mm) or stainless-steel balls (22-54mm) and various operating members The press-fit connection is for use with copper pipes (manufactured to EN 1057), stainless steel pipes (manufactured to EN10312) or carbon steel pipes (manufactured to EN10305-3). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250515016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Size:

12-54mm press-fit.

Marking:

Pressure, Size & CR on body. Hattersley or Hattersley logo, Pressure, Model and product details on lever on lockshield cover.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Hattersley Fig 114.PF - lever handle Hattersley Fig 114EXT.PF - lever handle with extension stem. Hattersley Fig 114LS.PF - lockshield handle. Hattersley Fig114T.PF - T-handle.

Approval Holder:

Hattersley

Company Name

Hattersley

Address

11-15 Epsilon Terrace West Road Ipswich Suffolk

Postcode

IP3 9FJ

Country

United Kingdom

Phone

0766465023

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of spherical valves with brass or chromium plated brass and various operating members The press-fit connection is for use with copper pipes (manufactured to EN 1057), stainless steel pipes (manufactured to EN10312) or carbon steel pipes (manufactured to EN10305-3). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250515017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

BVPS 12mm Pressfit ball valve with Lever handle BVPS 15mm Pressfit ball valve with Lever handle BVPS 18mm Pressfit ball valve with Lever handle BVPS 22mm Pressfit ball valve with Lever handle BVPS 28mm Pressfit ball valve with Lever handle BVPS 35mm Pressfit ball valve with Lever handle BVPS 42mm Pressfit ball valve with Lever handle BVPS 54mm Pressfit ball valve with Lever handle BVPSL 12mm Pressfit ball valve with lockable Lever handle BVPSL 15mm Pressfit ball valve with lockable Lever handle BVPSL 18mm Pressfit ball valve with lockable Lever handle BVPSL 22mm Pressfit ball valve with lockable Lever handle BVPSL 28mm Pressfit ball valve with lockable Lever handle BVPSL 35mm Pressfit ball valve with lockable Lever handle BVPSL 42mm Pressfit ball valve with lockable Lever handle BVPSL 54mm Pressfit ball valve with lockable Lever handle BVPSE 12mm Pressfit ball valve with extension Lever handle BVPSE 15mm Pressfit ball valve with extension Lever handle BVPSE 18mm Pressfit ball valve with extension Lever handle BVPSE 22mm Pressfit ball valve with extension Lever handle BVPSE 28mm Pressfit ball valve with extension Lever handle BVPSE 35mm Pressfit ball valve with extension Lever handle BVPSE 42mm Pressfit ball valve with extension Lever handle BVPSE 54mm Pressfit ball valve with extension Lever handle BVPST 12mm Pressfit ball valve with butterfly handle BVPST 15mm Pressfit ball valve with butterfly handle BVPST 18mm Pressfit ball valves with butterfly handle BVPST 22mm Pressfit ball valves with butterfly handle BVPST 28mm Pressfit ball valve with butterfly handle

Marking:

Valtech PN, size, batch date (WWYY) on body. NL on body.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

BVPS, BVPSL, BVPSE & BVPST Spherical Valves.

Approval Holder:

Ningbo Valtech Flow Control Co.LTD

Company Name

Ningbo Valtech Flow Control Co.LTD

Address

Room 9015 Ningbo Branch of Zhejiang University Science and Technology Park High Tech Zone Ningbo

Country

China

View All Listings by this Company

Range of spherical valves with DZR brass bodies (chromium plated), chromium plated brass balls, PTFE seat and single lever operating members. Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250608014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Conex, size and PN on the body and Conex on lever.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

126013RRR250404 ½” BSP (F), 126013RRR250606 ¾” BSP (F), 126013RRR250808 1” BSP (F), 126013RRR251010 1 1/4” BSP (F), 126013RRR251212 1 ½” BSP (F), 126013RRR251616 2” BSP (F).

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company