Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250102006

“<A> Press Copper M Profile” series press fittings with a copper body and EPDM ‘O’-rings, for use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250102006
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm - 54mm.
Marking:: A (manufacturers logo) and size on body.
Installation Requirements:: R001
Expiry date:: 31/01/2030
Model:: <A> Press Copper M Profile series: 90° Street Bend: APWG5001 150000, APWG5001 180000, APWG5001 220000, APWG5001 280000, APWG5001 350000, APWG5001 420000, APWG5001 540000. 90° Bend: APWG5002 150000, APWG5002 180000, APWG5002 220000, APWG5002 280000, APWG5002 350000, APWG5002 420000, APWG5002 540000. 45° Obtuse Street Elbow: APWG5041 150000, APWG5041 180000, APWG5041 220000, APWG5041 280000, APWG5041 350000, APWG5041 420000, APWG5041 540000. 45° Obtuse Elbow: APWG5040 150000, APWG5040 180000, APWG5040 220000, APWG5040 280000, APWG5040 350000, APWG5040 420000, APWG5040 540000. Crossover Short: APWG5086 150000, APWG5086 180000, APWG5086 220000. 60 deg Copper bend with plain ends: APWG5360 280000, APWG5360 350000, APWG5360 420000, APWG5360 540000. 30 deg Copper bend with plain ends: APWG5330 280000, APWG5330 350000, APWG5330 420000, APWG5330 540000. 15 deg Copper bend with plain ends: APWG5315 280000, APWG5315 350000, APWG5315 420000, APWG5315 540000. 45 deg Copper bend with plain ends: APWG5345 280000, APWG5345 350000, APWG5345 420000, APWG5345 540000. Equal Tee: APWG5130 151515, APWG5130 181818, APWG5130 222222, APWG5130 282828, APWG5130 353535, APWG5130 424242, APWG5130 545454. Reduced Tee: APWG5130 152215, APWG5130 181515, APWG5130 181518, APWG5130 181815, APWG5130 281528, APWG5130 221222, APWG5130 181218, APWG5130 221515, APWG5130 221522, APWG5130 221822, APWG5130 222215, APWG5130 281828, APWG5130 282228, APWG5130 351535, APWG5130 352235, APWG5130 352835, APWG5130 421542, APWG5130 422242, APWG5130 422842, APWG5130 423542, APWG5130 542254, APWG5130 542854, APWG5130 543554, APWG5130 544254. Pipe Cross: APWG5901 181500, APWG5901 221500, APWG5901 281500. Fitting Reducer: APWG5243 181500, APWG5243 221500, APWG5243 221800, APWG5243 281500, APWG5243 281800, APWG5243 282200, APWG5243 352200, APWG5243 352800, APWG5243 422200, APWG5243 422800, APWG5243 423500, APWG5243 542800, APWG5243 543500, APWG5243 544200. Straight Coupler: APWG5270 150000, APWG5270 180000, APWG5270 220000, APWG5270 280000, APWG5270 350000, APWG5270 420000, APWG5270 540000. Reduced Coupler: APWG5240 221500. Cap: APWG5301 150000, APWG5301 180000, APWG5301 220000, APWG5301 280000, APWG5301 350000, APWG5301 420000, APWG5301 540000. Slip Coupler: APWG5270S150000, APWG5270S180000, APWG5270S220000, APWG5270S280000, APWG5270S350000, APWG5270S420000, APWG5270S540000.

Approval Holder:: Conex Universal Limited

Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

WRAS Approval Number: #2207398

Range of stainless steel (SS316L) pressfit fittings with EPDM ‘O’-rings for use with stainless steel pipe (manufactured to EN10312). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2207398
Size:: 15-108mm. ½” BSP (M) or (F) - 4” BSP (M) or (F) (see model - some incorporate a captive nut).
Marking:: Brymec and size on body.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: Coupler OD15 29439 OD22 29440 OD28 29441 OD35 29442 OD42 29443 OD54 29444 OD76.1 29445 OD88.9 29446 OD108 29447 Slip coupling OD15 29448 OD22 29449 OD28 29450 OD35 29451 OD42 29452 OD54 29453 OD76.1 29454 OD88.9 29455 OD108 29456 Fitting Reducer OD22xOD15 29459 OD28xOD15 29460 OD28xOD22 29461 OD35xOD22 29462 OD35xOD28 29463 OD42xOD22 29464 OD42xOD28 29465 OD42xOD35 29466 OD54xOD28 29467 OD54xOD35, 29468 OD54xOD42 29469 OD76.1xOD54 29470 OD88.9xOD54 29471 OD88.9xOD76.1 29472 OD108xOD54 29473 OD108xOD76.1 29474 OD108xOD88.9 29475 F x F 90° Bend OD15 29317 OD22 29318 OD28 29319 OD35 29320 OD42 29321 OD54 29322 OD76.1 29323 OD88.9 23924 OD108 29325 M x F 90° Bend OD15 29308 OD22 29309 OD28 29310 OD35 29311 OD42 29312 OD54 29313 OD76.1 29314 OD88.9 29315 OD108 29316 F X F 45° Bend OD15 29346 OD22 29347 OD28 29348 OD35 29349 OD42 29350 OD54 23951 OD76.1 29353 OD88.9 29354 OD108 29355 M x F 45° Bend OD15 29336 OD22 29337 OD28 29338 OD35 29339 OD42 29340 OD54 29341 OD76.1 29343 OD88.9 29344 OD108 29345 Full Crossover OD15 29356 OD22 29357 OD28 29358 Equal Tee OD15 29376 OD22 29377 OD28 29378 OD35 29379 OD42 29380 OD54 29381 OD76.1 29382 OD88.9 29383 OD108 29384 Reducing Tee OD22xOD15 29385 OD22xOD15 29386 OD28xOD15 29387 OD28xOD22 29389 OD35xOD15 29390 OD35xOD22 29391 OD35xOD28 29392 OD42xOD22 29393 OD42xOD28 29394 OD42xOD35 29395 OD54xOD22 29396 OD54xOD28 29397 OD54xOD35 29398 OD54xOD42 29399 OD76.1xOD22 29400 OD76.1xOD28 29401 OD76.1xOD35 29402 OD76.1xOD42 29403 OD76.1xOD54 29404 OD88.9xOD22 29405 OD88.9xOD28 29406 OD88.9xOD35 29407 OD88.9xOD42 29408 OD88.9xOD54 29409 D88.9xOD76.1 29410 OD108xOD22 29411 OD108xOD28 29412 OD108xOD35 29413 OD108xOD42 29414 OD108xOD54 29415 OD108xOD76.1 29416 OD108xOD88.9 29417 Female Branch Tee OD15xRp 1/2 29418 OD22xRp 1/2 29419 OD22xRp 3/4 29420 OD28xRp 3/4 29421 OD28xRp 1/2 29422 OD28xRp 1 29423 OD35xRp 1/2 29424 OD35xRp 3/4 29425 OD35xRp1 1/4 29426 OD42xRp 1/2 29427 OD42xRp 3/4 29428 OD42xRp1 1/2 29429 OD54xRp 1/2 29430 OD54xRp 3/4 29431 OD54xRp 2 29432 OD76.1xRp 3/4 29433 OD76.1xRp 2 29434 OD88.9xRp 3/4 29435 OD88.9xRp 2 29436 OD108xRp 3/4 29437 OD108xRp 2 29438 Male 90° Elbow OD15xR 1/2 29370 OD22xR 3/4 29371 OD28xR 1 29372 OD35xR 1 1/4 29373 OD42xR 1 1/2 29374 OD54xR 2 29375 Female 90° Elbow OD15xRp 1/2 29362 OD22xRp 3/4 29363 OD28xRp 1 29366 OD35xRp 1 ¼ 29369 Female Backplate Elbow OD15xRp 1/2 29531 OD22xRp 3/4 29532 Male Adaptor OD15xR 1/2 29477 OD15xR 3/4 29478 OD22xR 1/2 29479 OD22xR 3/4 29480 OD22xR 1 29481 OD28xR 3/4 29482 OD28xR 1 29483 OD35xR1 29484 OD35xR 1 1/4 29485 OD42xR 1 1/2 29486 OD54xR 2 29487 OD76.1xR 2 1/2 29488 OD88.9xR 3 29489 OD108xR4 29490 Female Adaptor OD15xRp 1/2 29491 OD15xRp 3/4 29492 OD22xRp 1/2 29493 OD22xRp 3/4 29494 OD22xRp 1 29495 OD28xRp 3/4 29496 OD28xRp 1 29497 OD35xRp 1 1/4 29498 OD42xRp 1 1/2 29499 OD54xRp 2 29500 Plug-In Male Adaptor OD15xR1/2 29259 OD22xR 1/2 29260 OD22xR 3/4 29261 OD28xR 1 29262 Plug-In Female Adaptor OD15xRp 1/2 29245 OD22xRp 1/2 29245 OD22xRp 3/4 29247 OD28xR 3/4 29248 End Cap OD15 29533 OD22 29534 OD28 29535 OD35 29536 OD42 29537 OD54 29538 Male Union Flat Sealing OD15xR 1/2 29523 OD15xR 3/4 29524 OD22xR 3/4 29525 OD28xR 1 29526 OD35xR 1 1/4 29527 OD42xR 1 1/2 29528 OD54xR 2 29529 Female Union Flat Sealing OD15xRp 1/2 29514 OD15xRp 3/4 29515 OD22xRp 3/4 29516 OD22xRp 1 29517 OD28xRp 1 29519 OD35xRp 1 1/4 29520 OD42xRp 1 1/2 29521 OD54xRp 2 29522 Union Flat Sealing OD15 29508 OD22 29509 OD28 29510 OD35 29511 OD42 29512 OD54 29513

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

WRAS Approval Number: #240902084

Range of copper crimped fittings with EPDM ‘O’-rings for use with copper pipe manufactured to EN1057. For above and below ground use. Maximum working pressure 16 Bar. Maximum operating temperature 99°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240902084
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models
Marking:: Brymec and size on body.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: 27800 15mm Copper-Press 90° M/F Bend 27801 22mm Copper-Press 90° M/F Bend 27802 28mm Copper-Press 90° M/F Bend 27803 35mm Copper-Press 90° M/F Bend 27804 42mm Copper-Press 90° M/F Bend 27805 54mm Copper-Press 90° M/F Bend 27806 67mm Copper-Press 90° M/F Bend 27807 76mm Copper-Press 90° M/F Bend 27809 108mm Copper-Press 90° M/F Bend 27810 15mm Copper-Press 90° F/F Bend 27811 22mm Copper-Press 90° F/F Bend 27812 28mm Copper-Press 90° F/F Bend 27813 35mm Copper-Press 90° F/F Bend 27814 42mm Copper-Press 90° F/F Bend 27815 54mm Copper-Press 90° F/F Bend 27816 67mm Copper-Press 90° F/F Bend 27817 76mm Copper-Press 90° F/F Bend 27819 108mm Copper-Press 90° F/F Bend 27820 15mm Copper-Press 45° M/F Bend 27821 22mm Copper-Press 45° M/F Bend 27822 28mm Copper-Press 45° M/F Bend 27823 35mm Copper-Press 45° M/F Bend 27824 42mm Copper-Press 45° M/F Bend 27825 54mm Copper-Press 45° M/F Bend 27826 67mm Copper-Press 45° M/F Bend 27827 76mm Copper-Press 45° M/F Bend 27829 109mm Copper-Press 45° M/F Bend 27830 15mm Copper-Press 45° F/F Bend 27831 22mm Copper-Press 45° F/F Bend 27832 28mm Copper-Press 45° F/F Bend 27833 65mm Copper-Press 45° F/F Bend 27834 42mm Copper-Press 45° F/F Bend 27835 54mm Copper-Press 45° F/F Bend 27836 67mm Copper-Press 45° F/F Bend 27837 76mm Copper-Press 45° F/F Bend 27839 108mm Copper-Press 45° F/F Bend 27840 15mm Copper-Press Full Crossover 27841 22mm Copper-Press Full Crossover 27845 15mm Copper-Press Partial Crossover 27846 22mm Copper-Press Partial Crossover 27850 15mm Copper-Press Equal Tee 27851 22mm Copper-Press Equal Tee 27852 28mm Copper-Press Equal Tee 27853 35mm Copper-Press Equal Tee 27854 42mm Copper-Press Equal Tee 27855 54mm Copper-Press Equal Tee 27856 67mm Copper-Press Equal Tee 27857 76mm Copper-Press Equal Tee 27859 108mm Copper-Press Equal Tee 27860 15 x 22 x 15mm Copper-Press Reducing Tee ExBxE 27861 22 x 15 x 15mm Copper-Press Reducing Tee ExBxE 27862 22 x 15 x 22 mm Copper-Press Reducing Tee ExBxE 27863 22 x 22 x 15mm Copper-Press Reducing Tee ExBxE 27865 28 x 15 x 22mm Copper-Press Reducing Tee ExBxE 27866 28 x 15 x 28mm Copper-Press Reducing Tee ExBxE 27867 28 x 22 x 22mm Copper-Press Reducing Tee ExBxE 27868 28 x 22 x 28mm Copper-Press Reducing Tee ExBxE 27869 28 x 28 x 15mm Copper-Press Reducing Tee ExBxE 27870 28 x 28 x 22mm Copper-Press Reducing Tee ExBxE 27872 35 x 15 x 35mm Copper-Press Reducing Tee ExBxE 27874 35 x 22 x 28mm Copper-Press Reducing Tee ExBxE 27875 35 x 22 x 35mm Copper-Press Reducing Tee ExBxE 27876 35 x 28 x 28mm Copper-Press Reducing Tee ExBxE 27877 35 x 28 x 35mm Copper-Press Reducing Tee ExBxE 27880 42 x 15 x 42mm Copper-Press Reducing Tee ExBxE 27881 42 x 22 x 42mm Copper-Press Reducing Tee ExBxE 27882 42 x 28 x 42mm Copper-Press Reducing Tee ExBxE 27884 42 x 35 x 42mm Copper-Press Reducing Tee ExBxE 27885 54 x 22 x 54mm Copper-Press Reducing Tee ExBxE 27886 54 x 28 x 54mm Copper-Press Reducing Tee ExBxE 27887 54 x 35 x 54mm Copper-Press Reducing Tee ExBxE 27888 54 x 42 x 54mm Copper-Press Reducing Tee ExBxE 27889 67 x 54 x 67mm Copper-Press Reducing Tee ExBxE 27890 76 x 54 x 76mm Copper-Press Reducing Tee ExBxE 27893 108 x 54 x 108mm Copper-Press Reducing Tee ExBxE 27896 42 x 42 x 35mm Copper-Press Reducing Tee ExBxE 27900 22 x 15mm Copper-Press Reducing Coupling 27901 28 x 15mm Copper-Press Reducing Coupling 27902 28 x 22 mm Copper-Press Reducing Coupling 27903 35 x 22mm Copper-Press Reducing Coupling 27904 35 x 28mm Copper-Press Reducing Coupling 27905 42 x 22mm Copper-Press Reducing Coupling 27906 42 x 28mm Copper-Press Reducing Coupling 27907 42 x 35mm Copper-Press Reducing Coupling 27908 54 x 28mm Copper-Press Reducing Coupling 27909 54 x 35mm Copper-Press Reducing Coupling 27910 54 x 42mm Copper-Press Reducing Coupling 27915 22 x 15mm Copper-Press Reducer 27916 28 x 15mm Copper-Press Reducer 27917 28 x 22mm Copper-Press Reducer 27918 35 x 22mm Copper-Press Reducer 27919 35 x 28mm Copper-Press Reducer 27920 42 x 22mm Copper-Press Reducer 27921 42 x 28mm Copper-Press Reducer 27922 42 x 35mm Copper-Press Reducer 27923 54 x 35mm Copper-Press Reducer 27924 54 x 42mm Copper-Press Reducer 27925 67 x 54mm Copper-Press Reducer 28234 76 x 35mm Copper-Press Reducer 27926 76 x 54mm Copper-Press Reducer 27929 108 x54mm Copper-Press Reducer 27930 108 x76mm Copper-Press Reducer 27932 54 x 28mm Copper-Press Reducer 27940 15mm Copper-Press Coupling 27941 22mm Copper-Press Coupling 27942 28mm Copper-Press Coupling 27943 35mm Copper-Press Coupling 27944 42mm Copper-Press Coupling 27945 54mm Copper-Press Coupling 27946 67mm Copper-Press Coupling 27947 76mm Copper-Press Coupling 27949 108mm Copper-Press Coupling 27950 15mm Copper-Press Slip Coupling 27951 22mm Copper-Press Slip Coupling 27952 28mm Copper-Press Slip Coupling 27953 35mm Copper-Press Slip Coupling 27954 42mm Copper-Press Slip Coupling 27955 54mm Copper-Press Slip Coupling 27956 67mm Copper-Press Slip Coupling 27957 76mm Copper-Press Slip Coupling 27960 15mm Copper-Press End Cap 27961 22mm Copper-Press End Cap 27962 28mm Copper-Press End Cap 27963 35mm Copper-Press End Cap 27964 42mm Copper-Press End Cap 27965 54mm Copper-Press End Cap 27966 67mm Copper-Press End Cap 27967 76mm Copper-Press End Cap 28071 15mm x1/2" Copper-Press Female Iron 90° Elbow 28074 22mm x3/4" Copper-Press Female Iron 90° Elbow 28081 15mm x1/2" Copper-Press Male Iron 90° Elbow 28101 15mm x1/2" x 15mm Copper-Press Female Branch Reducing Tee 28102 22mm x1/2" x 22mm Copper-Press Female Branch Reducing Tee 28104 28mm x1/2" x 28mm Copper-Press Female Branch Reducing Tee 28106 35mm x1/2" x 35mm Copper-Press Female Branch Reducing Tee 28108 42mm x1/2" x 42mm Copper-Press Female Branch Reducing Tee 28110 54mm x1/2" x 54mm Copper-Press Female Branch Reducing Tee 28115 15mm x 3/8" Copper-Press Male Iron Adaptor 28116 15mm x 1/2" Copper-Press Male Iron Adaptor 28117 15mm x 3/4" Copper-Press Male Iron Adaptor 28118 22mm x 1/2" Copper-Press Male Iron Adaptor 28119 22mm x 3/4" Copper-Press Male Iron Adaptor 28120 22mm x 1" Copper-Press Male Iron Adaptor 28121 28mm x 3/4" Copper-Press Male Iron Adaptor 28122 28mm x 1" Copper-Press Male Iron Adaptor 28125 35mm x 1 1/4" Copper-Press Male Iron Adaptor 28128 42mm x 1 1/2" Copper-Press Male Iron Adaptor 28130 54mm x 2" Copper-Press Male Iron Adaptor 28131 67mm x 2 1/2" Copper-Press Male Iron Adaptor 28133 76mm x 3" Copper-Press Male Iron Adaptor 28134 108mm x 4" Copper-Press Male Iron Adaptor 28141 15mm x 1/2" Copper-Press Plug-In Female Adapter 28142 22mm x 1/2" Copper-Press Plug-In Female Adapter 28143 22mm x 3/4" Copper-Press Plug-In Female Adapter 28145 28mm x 1" Copper-Press Plug-In Female Adapter 28148 54mm x 2" Copper-Press Plug-In Female Adapter 28149 35mm x 1" Copper-Press Plug-In Female Adapter 28151 15mm x 1/2" Copper-Press Female Iron Adaptor 28153 22mm x 1/2" Copper-Press Female Iron Adaptor 28154 22mm x 3/4" Copper-Press Female Iron Adaptor 28157 28mm x 1" Copper-Press Female Iron Adaptor 28160 35mm x 1 1/4" Copper-Press Female Iron Adaptor 28163 42mm x 1 1/2" Copper-Press Female Iron Adaptor 28165 54mm x 2" Copper-Press Female Iron Adaptor 28166 67mm x 2 1/2" Copper-Press Female Iron Adaptor 28169 76mm x 3" Copper-Press Female Iron Adaptor 28171 15mm x 1/2" Copper-Press Plug-In Male Adapter 28173 22mm x 3/4" Copper-Press Plug-In Male Adapter 28231 67 x 28mm Copper-Press Reducer 28232 67 x 35mm Copper-Press Reducer 28234 76 x 35mm Copper-Press Reducer 28233 67 x 42mm Copper-Press Reducer 28236 76 x 67mm Copper-Press Reducer 28237 108 x42mm Copper-Press Reducer 28238 108 x42mm Copper-Press Reducer 28255 67 x 28 x 67mm Copper-Press Reducing Tee ExBxE 28260 76 x 35 x 76mm Copper-Press Reducing Tee ExBxE 27897 54 x 22 x 54mm Extended Spigot Manifold Tee 27898 54 x 28 x 54mm Extended Spigot Manifold Tee 27911 67mm x 1/2" 2 Port Copper‐Press Multiport Coupler 27912 76mm x 1/2" 2 Port Copper‐Press Multiport Coupler 27913 108mm x 3/4" 4 Port Copper‐Press Multiport Coupler 28190 15mm x 1/2" Copper Press Female Union 28192 22mm x 3/4" Copper Press Female Union 28195 28mm x 1" Copper Press Female Union 28196 35mm x 1 1/4" Copper Press Female Union 28197 42mm x 1 1/2" Copper Press Female Union 28198 54mm x 2" Copper Press Female Union 28200 15mm x 1/2" Copper Press Male Union 28203 22mm x 3/4" Copper Press Male Union 28206 28mm x 1" Copper Press Male Union 28207 35mm x 1 ¼ Copper Press Male Union 28208 42mm x 1 1/2" Copper Press Male Union 28209 54mm x 2" Copper Press Male Union 28225 15mm x1/2"Copper Press Female Backplate Elbow 28241 42mm Copper Press Flange (1 1/2" / DN40) 28242 54mm Copper Press Flange (2" / DN50) 28243 67mm Copper Press Flange (2 1/2" / DN65) 28244 76mm Copper Press Flange (3”/DN 80) 28246 108mm Copper Press Flange (4" / DN100)

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

WRAS Approval Number: #241002051

Range of system 2000 of flange adaptors and connectors with ductile iron bodies (Blue Epoxy Coated) incorporating EPDM seals. For use with PE pipe manufactured to En 12201 & PVC Pipe manufactured to DIN 8062. Maximum working pressure: 16.0Bar Cold water use only.

Section:: 1220 Fittings for use with Tube and Pipe
Section Subtitle:: Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.
WRAS Approval Number:: 241002051
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below
Marking:: Hawle logo and size on body.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: System 2000 Range: 0400 DN50 – DN600 0430 DN63 – DN355 5045 DN80 & DN100 8075 DN63 – DN315 8515 DN63 – DN225 8525 DN63 – DN225 8535 DN63 – DN315 8545 DN63 – DN315 8555 DN63 – DN315 8557 DN63 – DN315

Product Images

Approval Holder:: E-Hawle Armaturenwerke GmbH

Company Name
E-Hawle Armaturenwerke GmbH
Address
Wagrainer Stabe 13 AT 4840 Vocklabruck

View All Listings by this Company

WRAS Approval Number: #2112373

Jet range of water meters with brass blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure16.0 bar. Maximum operating temperature 85°C.

Section:: 1505 Water Meters
Size:: see model
Marking:: JET, WRAS and other technical info on dial.
Installation Requirements:: R001 R120
Expiry date:: 31/12/2026
Model:: ¾” BSP (M) 172033 JET NON PULSED COLD WATER METER 15 FTG 172035 JET PULSED COLD WATER METER 15 FTG 172041 JET PULSED HOT WATER METER 15 FTG 1” BSP (M) 172034 JET NON PULSED COLD WATER METER 20 FTG 172036 JET PULSED COLD WATER METER 20 FTG 172042 JET PULSED HOT WATER METER 20 FTG 1 ¼” BSP (M) 172037 JET PULSED COLD WATER METER 25 FTG 172043 JET PULSED HOT WATER METER 20 FTG 1 ½” BSP (M) 171038 JET PULSED COLD WATER METER 32 FTG 172044 JET PULSED COLD WATER METER 20 FTG 2” BSP (M) 172039 JET PULSED COLD WATER METER 32 FTG 172045 JET PULSED COLD WATER METER 20 FTG 2 ½” BSP (M) 172040 JET PULSED COLD WATER METER 32 FTG 172046 JET PULSED COLD WATER METER 20 FTG

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

WRAS Approval Number: #2309381

Range of water meters with brass bodies and EPDM ‘O’-rings and plastic strainer on inlet. Maximum working pressure 16 bar. Cold water use only.

Section:: 1505 Water Meters
Size:: 1 1/4” BSP (M) 1 ½” BSP (M) 2” BSP (M)
Marking:: Resideo & technical information on dial face. Flow arrow cast on body.
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: EW1100CC2800 EW1100CC3900 EW1100CC4600 EW1100CM2800 EW1100CM3900 EW1100CM4600 - DN25, DN32 and DN40

Approval Holder:: Pittway Sarl

Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company

WRAS Approval Number: #241104707

Bias chamber incorporating an EPDM diaphragm and ‘O’-ring with a brass body. Maximum working pressure 35.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 7/8-14 UNF male
Marking:: Technolog & product info on label.
Installation Requirements:: R001
Expiry date:: 30/11/2029
Model:: CGF03S06

Product Images

Manufacturer:: Technolog Limited

Company Name
Technolog Limited
Address
Ravenstor Road Wirksworth
Postcode
DE4 4FY
Country
United Kingdom
Phone
01629 823611

View All Listings by this Company

WRAS Approval Number: #241002708

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002708
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Pentax logo, model code and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Product Images

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company
Manufacturer:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

WRAS Approval Number: #241002709

Range of vertical (CVM) or horizontal (CHM) multistage pumps with stainless-steel bodies and stainless-steel impellers, intermediate chambers, shaft and outer sleeve and EPDM seals. Maximum working pressure: 25 Bar. Maximum working temperature: 23°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002709
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models below.
Marking:: Groundfos Logo, D.O.M (YYYY.MM.DD), series number, max temp, max pressure and other information on data plate on body. Flow arrow on body
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: CV(H)M 4: 2 to 12 stages: Suction flange – DN50, Discharge flange – DN20. CV(H)M 5: 2 to 12 stages: Suction flange – DN50, Discharge flange – DN40. CV(H)M 6: 2 to 11 stages: Suction flange – DN65, Discharge flange – DN40. CV(H)M 10: 2 to 10 stages: Suction flange – DN100, Discharge flange – DN80.

Product Images

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

WRAS Approval Number: #241207701

‘UPM10’ and ‘UPM20’ range of circulator pumps with a stainless-steel body, plastic impellor and EPDM ‘O’-rings. The product is supplied with EPDM gaskets for the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241207701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1½” BSP (M) inlet/outlet.
Marking:: Grundfos and Grundfos logo, type and model on nameplate on motor housing. P/N no., P/C no., Serial (S/N) no., technical info, manufacturing country and data matrix on end of motor housing. Flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/12/2029
Model:: UPM 10M 25-95 N 180, UPM 10L 25-105 N 180, UPM 10XL 25-125 N 180, UPM 20S 25-145 N 180. Where: Pump type: UPM 10M, UPM 10L, UPM 10XL, UPM 20S. Control variant: []: PWM, LIN: LIN bus input signal, 0-10V, AUTO, HYBRID, SOLAR, DHW. Nominal diameter: 25: G 1½”. Max. Head: 95: 9.5m, 105: 10.5m, 125: 12.5m, 145: 14.5m. Designation/Pump housing: N 180: Stainless steel body, 180mm port to port length. Control box orientation: 3: 3 o’clock (right), 6: 6 o’clock (below), 9: 9 o’clock (left). Customer code: XXX (no impact on water contact parts).

Product Images

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company