Directory Search Results

Print List

#2005526

'Chemfix CH+'. Grey coloured, two-component chemical anchor resin. Mix in a 10:1 volume ratio. Apply as per manufacturer's instructions dated 05/07/2014. Cure for 7 days@7°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5311 Resin Anchors
Expiry date:
31/05/2025

Approval Holder:
Chemfix Products Ltd.
Company Name
Chemfix Products Ltd.
Address
Mill Street East, Dewsbury, West Yorkshire
Postcode
WF12 9BQ
Phone
+44(0)1924 453886

View All Listings by this Company

Print This Approval


#2006508

'Permabond HM146'. Green coloured anaerobic adhesive. For use with water up to 85°C. This product is to be applied and cured in strict accordance with the manufacturer's instructions.

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
2006508
Expiry date:
30/06/2025

Approval Holder:
Permabond Engineering Adhesives Ltd.
Company Name
Permabond Engineering Adhesives Ltd.
Address
Wessex Business Park, Wessex Way, Colden Common, Hampshire
Postcode
SO21 1WP
Phone
+44 (0) 1962 711 661
General Email
help.europe@permabond.com

View All Listings by this Company

Print This Approval


#2009312

Range of wall hung WC pan with bidet seat where the flow is controlled via a solenoid valve and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Cold supply only. Maximum working pressure 10 bar.

Section:
0278 Bidets and associated fittings
Size:
3/8” BSP (M)
Marking:
Geberit on cover and remote. Manufacturer, model, serial no and other technical information under cover.
Installation Requirements:
R001 R415 R574
Expiry date:
30/09/2025
Model:
Geberit Aqua Clean Sela 146.220.21.1 (gloss chrome) & 146.220.11.1 (white). Models added July 2023: 146.220.JT.1 (white matt), 146.250.21.1 (square gloss chrome) & 146.250.01.1 (square white).
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2101803

`Aqua Clean Mera` range of bidets incorporating an electronically operated seat, flow is controlled by solenoid valve and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Cold water supply only.

Section:
0278 Bidets and associated fittings
Size:
3/8” BSP captive nut
Marking:
Geberit under seat lid.
Installation Requirements:
R001 R574
Expiry date:
31/01/2026
Model:
Geberit AquaClean Mera Comfort 146.210.11.1 (white) 146.210.21.1 (chrome) Geberit AquaClean Mera Classic 146.200.11.1 (white) 146.200.21.1 (chrome)

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company
Manufacturer:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2111704

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (either stainless steel or brass bodies in a variety of finishes). Flow is controlled via two solenoid valves (housed in a control box) activated via an infra-red sensor, the inlets to the control box incorporate stainless steel strainers. The temperature is controlled independently via a ceramic cartridge with a dome type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2111704
Size:
Control box: ⅜” BSP (M). Tap: Braided stainless steel braided, PEX lined hoses with 10mm spigot end connections
Marking:
VOLA on operating member
Installation Requirements:
R001 R006 R007 R010
Expiry date:
30/11/2026
Model:
VOLA HV1E-XX Stainless steel. Where XX denotes the surface finish: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. VOLA HV1E-XX Brass. Where XX denotes the surface finish: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 20 of 232

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.