Range of three-hole, brass bodied, single outlet (fixed) combination tap assemblies available with various finishes (see models). The products incorporate either a non-rising spindle (models 1648 and 1881 only) or quarter turn ceramic disc (all other models) headworks with either cross top (models 1648 and 1881 only) or single lever (all other models) operating members. The spout outlet incorporates a plastic aerator. The products are supplied with metal backnuts and lever operated pop-up wastes. Maximum working pressure 3.0 Bar Maximum operating temperature 65.0°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250702039

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Drummonds logo on side valve operating member

Installation Requirements:

R001 R005 R010

Expiry date:

31/07/2030

Model:

DAD1640*UK The Coll Lever 3 Hole Basin Mixer DAD1648*UK The Mull Classic 3 Hole Basin Mixer DAD1659*MUK The Chessleton Lever 3 Hole Basin Mixer DAD1659*UK The Chessleton Lever 3 Hole Basin Mixer DAD1663*UK The Chessleton Lever 3 Hole Basin Mixer DAD1668*MUK The Coll Lever 3 Hole Basin Mixer DAD1668*UK The Coll Lever 3 Hole Basin Mixer DAD1881* The Bibury 3 Hole Basin Mixer Where * denotes the finish, and can be replaced with any of the following: B – Unlacquered Brass, C – Chrome, N – Nickel, Q – Brushed Nickel, V – Antique Brushed Brass, W – Antique Nickel, X – Brushed Brass, Y – Antique Bronze, Z - Antique Brass

Approval Holder:

Drummonds Bathrooms Ltd

Company Name

Drummonds Bathrooms Ltd

Address

Unit 2c Henley Business Park Pirbright Road Normandy Surrey

Postcode

GU3 2DX

Country

United Kingdom

General Email

nick@drummonds-uk.com

View All Listings by this Company

Stainless steel single coil indirect DHW calorifier Maximum working pressure Primary/Secondary - 25/8 bar. Maximum operating temperature Primary/Secondary - 200/80 °C

Section:

0820 Cylinders

Section Subtitle:

Indirectly heated, coil type, stainless steel.

WRAS Approval Number:

250704714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M) 1 ¼” (M)

Marking:

Strebel Heating Technology, model no., serial no., year of manufacture, technical info and contact info on label.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

S-LC-I 500 S-LC-I 800 S-LC-I 1000 S-LC-I 1500 S-LC-I 2000 S-LC-I 2500

Product Images

Approval Holder:

Strebel Heating Ltd.

Company Name

Strebel Heating Ltd.

Address

10 Invincible Road Farnborough Hampshire

Postcode

GU14 7QU

Country

United Kingdom

Phone

01276 685 422

General Email

justin.jearum@strebel.co.uk

View All Listings by this Company

Expansion vessel with a carbon steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾" BSP (M).

Marking:

Aquasystem logo (brand of Zilio Industries SpA) and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

AR2

Product Images

Approval Holder:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve (suitable for back flow protection against fluid category 3) and a stainless-steel braided EPDM lined hose. The isolation valves are operated via a single lever. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1015 Filling Loop

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Orkli logoon valve body, production date and hour (DD/MM/YY hh:mm) printed on ball valve body; CR, flow arrow, Orkli logo on double check valve body

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

9E26009

Approval Holder:

Orkli S. Coop

Company Name

Orkli S. Coop

Address

Ctra. Zaldibia, s/n Ordizia

Postcode

20240

Country

Spain

Phone

+34 610 146 459

General Email

iangulo@orkli.es

View All Listings by this Company

Range of copper and bronze capillary brazed fittings for use with copper pipe manufactured to EN1057:2006 +A1:2010 Maximum pressure 10.0 Bar (54mm up to and including 108mm) Maximum pressure 2.0 Bar (Over 108mm up to and including 159mm) Maximum operating temperature 100°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251104002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Flowflex logo and size on the body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

5002A LONG EQUAL 90DEG BEND EF (Size = mm Brazed): 5002A.67, 5002A.76, 5002A.89, 5002A.108. 5041 45DEG ELBOW EF (Size = mm Brazed): 5041.67, 5041.76, 5041.108, 5041.133, 5041.159. 5090 EQUAL ELBOW EF (Size = mm Brazed): 5090.67, 5090.76, 5090.89, 5090.108, 5090.133, 5090.159. 5092 STREET ELBOW EF (Size= mm Brazed): 5092.67, 5092.76. 5130 TEE EQUAL EF (Size = mm Brazed): 5130.67, 5130.76, 5130.108, 5130.133, 5130.159. 5130R TEE REDUCED BRANCH EF (Size = mm x mm x mm Brazed): 5130R.672867, 5130R.673567, 5130R.674267, 5130R.675467, 5130R.762876, 5130R.763576, 5130R.764276, 5130R.765476, 5130R.766776, 5130R.10835108, 5130R.10842108, 5130R.10854108, 5130R.10867108, 5130R.10876108, 5130R.133108133, 5130R.15954159, 5130R.15967159, 5130R.15976159, 5130R.159108159, 5130R.159133159. 5240 REDUCING CPLG (Size = mm x mm Brazed): 5240.67x42, 5240.67x54, 5240.76x54, 5240.76x67, 5240.89x76, 5243 FITTING RED EF (Size = mm x mm Brazed): 5243.67x22, 5243.67x28, 5243.67x35, 5243.67x42, 5243.67x54, 5243.76x35, 5243.76x42, 5243.76x54, 5243.76x67, 5243.89x76, 5243.108x42, 5243.108x54, 5243.108x67, 5243.108x76, 5243.108x89, 5243.133x67, 5243.133x76, 5243.133x108, 5243.159x76, 5243.159x108, 5243.159x133. 5270 COUPLING EF (Size = mm x mm Brazed): 5270.67, 5270.76, 5270.89, 5270.108, 5270.133, 5270.159. 5301 STOP END EF (Size = mm Brazed): 5301.67, 5301.76, 5301.89, 5301.108, 5301.159. 4270G CUFI STRAIGHT BRONZE ADAPTOR (Size = mm Brazed x BSP M): 4270G.67x2½”, 4270G.76x3", 4270G.108x4". 4243G CUIT ADAPTOR BRONZE (Size = mm Brazed by BSP F): 4243G.67x2½”, 4243G.76x2½”, 4243G.76x3", 4243G.108x4".

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company