Range of SUS316L & SUS304 stainless steel press fittings for use with stainless steel pipe manufactured to EN 10312. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107090

Size:

15mm - 108mm press-fit connections. ½” BSP (F) to 2” BSP (F). ½” BSP (M) to 2” BSP (M).

Marking:

SUMWIN, EN10312 and DN on body

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Straight coupling (press fit) 4111111O, 1111111O, 4111221O, 1111221O, 4111331O, 1111331O, 4111441O, 1111441O, 4111551O, 1111551O, 4111661O, 1111661O, 4111881O, 1111881O, 4111991O, 1111991O, 4111AA1O, 1111AA1O. Reducing coupling (press fit) 4111211O, 1111211O, 4111321O, 1111321O, 4111431O, 1111431O, 4111541O, 1111541O, 4111651O, 1111651O, 4111861O, 1111861O, 4111961O, 1111961O, 4111981O, 1111981O, 4111A81O, 1111A81O, 4111A91O, 1111A91O. Female thread straight coupling (Press fit x BSP (F)) 4113111O, 1113111O, 4113221O, 1113221O, 4113331O, 1113331O, 4113441O, 1113441O, 4113551O, 1113551O, 4113661O, 1113661O, 4113211O, 1113211O, 4113321O, 1113321O, 4113431O, 1113431O, 4113541O, 1113541O, 4113651O, 1113651O. Male thread straight coupling (Press fit x BSP (M)) 4112111O, 1112111O, 4112221O, 1112221O, 4112331O, 1112331O, 4112211O, 1112211O, 4112321O, 1112321O, 4112441O, 1112441O, 4112551O, 1112551O, 4112661O, 1112661O, 4112541O, 1112541O, 4112651O, 1112651O. Flange coupling (Press fit) 41I4111O, 11I4111O, 41I4221O, 11I4221O, 41I4331O, 11I4331O, 41I4441O, 11I4441O, 41I4551O, 11I4551O, 41I4661O, 11I4661O, 41I4881O, 11I4881O, 41I4991O, 11I4991O, 41I4AA1O, 11I4AA1O. 90° elbow (Press fit) 4121111O, 1121111O, 4121221O, 1121221O, 4121331O, 1121331O, 4121441O, 1121441O, 4121551O, 1121551O, 4121661O, 1121661O, 4121881O, 1121881O, 4121991O, 1121991O, 4121AA1O, 1121AA1O. 90° ER reducing elbow (Press fit) 4121211O, 1121211O, 4121321O, 1121321O, 4121431O, 1121431O, 4121541O, 1121541O, 4121651O, 1121651O. 90° ED one-way elbow (Press fit) 4120111O, 1120111O, 4120221O, 1120221O, 4120331O, 1120331O, 4120441O, 1120441O, 4120551O, 1120551O, 4120661O, 1120661O. 90° EFZ Female thread short Elbow (Press fit x BSP (F)) 4124111O, 1124111O, 4124221O, 1124221O, 4124331O, 1124331O, 4124211O, 1124211O, 4124321O, 1124321O. 90° EF Female thread Elbow (Press fit x BSP (F)) 4123111O, 1123111O, 4123221O, 1123221O, 4123331O, 1123331O, 4123441O, 1123441O, 4123551O, 1123551O, 4123661O, 1123661O, 4123211O, 1123211O, 4123321O, 1123321O, 4123431O, 1123431O, 4123541O, 1123541O, 4123651O, 1123651O. EM Male thread Elbow (Press fit x BSP (M)) 4122111O, 1122111O, 4122221O, 1122221O, 4122331O, 1122331O, 4122441O, 1122441O, 4122551O, 1122551O, 4122661O, 1122661O, 4122211O, 1122211O, 4122321O, 1122321O, 4122431O, 1122431O, 4122541O, 1122541O, 4122651O, 1122651O. 45° Elbow (Press fit) 4141111O, 1141111O, 4141221O, 1141221O, 4141331O, 1141331O, 4141441O, 1141441O, 4141551O, 1141551O, 4141661O, 1141661O, 4141881O, 1141881O, 4141991O, 1141991O, 4141AA1O, 1141AA1O. 45° ED one-way Elbow (Press fit) 4140111O, 1140111O, 4140221O, 1140221O, 4140331O, 1140331O, 4140441O, 1140441O, 4140551O, 1140551O, 4140661O, 1140661O. Equal tee (Press fit) 4131111O, 1131111O, 4131221O, 1131221O, 4131331O, 1131331O, 4131441O, 1131441O, 4131551O, 1131551O, 4131661O, 1131661O, 4131881O, 1131881O, 4131991O, 1131991O, 4131AA1O, 1131AA1O. Reducing tee (Press fit) 4131211O, 1131211O, 4131311O, 1131311O, 4131321O, 1131321O, 4131431O, 1131431O, 4131541O, 1131541O, 4131651O, 1131651O, 4131861O, 1131861O, 4131961O, 1131961O, 4131981O, 1131981O, 4131A81O, 1131A81O, 4131A91O, 1131A91O. Female thread Tee (Press fit x BSP (F)) 4133111O, 1133111O, 4133221O, 1133221O, 4133331O, 1133331O, 4133441O, 1133441O, 4133551O, 1133551O, 4133661O, 1133661O, 4133211O, 1133211O, 4133321O, 1133321O, 4133431O, 1133431O, 4133541O, 1133541O, 4133651O, 1133651O. Male thread Tee (Press fit x BSP (M)) 4132111O, 1132111O, 4132221O, 1132221O, 4132331O, 1132331O, 4132441O, 1132441O, 4132551O, 1132551O, 4132661O, 1132661O, 4132211O, 1132211O, 4132321O, 1132321O, 4132431O, 1132431O, 4132541O, 1132541O, 4132651O, 1132651O. Adjustable straight (Press fit) 4116111O, 1116111O, 4116221O, 1116221O, 4116331O, 1116331O, 4116441O, 1116441O, 4116551O, 1116551O, 4116661O, 1116661O, 4116881O, 1116881O, 4116991O, 1116991O, 4116AA1O, 1116AA1O. Hex adaptor (BSP (F) 411L111O, 111L111O, 411L221O, 111L221O, 411L331O, 111L331O, 411L441O, 111L441O, 411L551O, 111L551O, 411L661O, 111L661O. Bridge (Press fit) 411Q111O, 111Q111O, 411Q221O, 111Q221O, 411Q331O, 111Q331O. Cap (Press fit) 4115111O, 1115111O, 4115221O, 1115221O, 4115331O, 1115331O, 4115441O, 1115441O, 4115551O, 1115551O, 4115661O, 1115661O.

Product Images

Approval Holder:

Guangdong Sumwin New Material Group Co., Ltd.

Company Name

Guangdong Sumwin New Material Group Co., Ltd.

Address

Duichuan Industrial Zone, Yanghe Town, Gaoming Region, Foshan City, Guangdong

Country

China

View All Listings by this Company

Manufacturer:

Guangdong Sumwin New Material Group Co., Ltd.

Company Name

Guangdong Sumwin New Material Group Co., Ltd.

Address

Duichuan Industrial Zone, Yanghe Town, Gaoming Region, Foshan City, Guangdong

Country

China

View All Listings by this Company

Range of WC dual flush drop valves comprising of a plastic body, silicone seal and an internal overflow. The valve is operated via a push button or lever assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2107105

Note:

Open outlet use only.

Size:

2” BSP (M)

Marking:

Kohler and model number on valve body

Installation Requirements:

R001 R571

Expiry date:

31/07/2026

Model:

1190056 dual flush valve with any of the following actuators: 1278504-XX, 1367704-XX, 1215521-XX or 1199720-XX. 1409397 dual flush valve with 1409402-XX actuator. XX denotes the finish on the actuator, e.g. CP (chrome plating).

Product Images

Approval Holder:

Kohler (Thailand) Public Company Limited

Company Name

Kohler (Thailand) Public Company Limited

Address

16TH FLOOR JASMINE CITY BUILDING 2 SOI SUKHUMVIT 23.

View All Listings by this Company

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

View All Listings by this Company

Range of wastewater heat recovery systems incorporating a double wall stainless steel corrugated pipe. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1350 Heat Exchangers

WRAS Approval Number:

2105021

Note:

Tangit upv-c solvent cement used on joints.

Size:

¾” BSP (F) inlet x outlet.

Marking:

Zypho logo, model name, serial number, WRAS and other product info on adhesive label located on body.

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

ZYPHO PiPe 55 DW. ZYPHO PiPe 60 DW. ZYPHO PiPe 65 DW.

Approval Holder:

Zypho, SA

Company Name

Zypho, SA

Country

Portugal

Phone

+351 210 991 351

General Email

b2b@zypho.pt

View All Listings by this Company

Manufacturer:

Zypho, SA

Company Name

Zypho, SA

Country

Portugal

Phone

+351 210 991 351

General Email

b2b@zypho.pt

View All Listings by this Company

Range of wastewater heat recovery systems incorporating stainless steel corrugated pipe. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1350 Heat Exchangers

WRAS Approval Number:

2105050

Note:

Tangit upv-c solvent cement used on joints.

Size:

¾” BSP (F) inlet x outlet.

Marking:

MIRA SHOWERS, model name, serial number, WRAS and other product info on adhesive label located on body.

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

MIRA HEATCAPTURE

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of vertical vented cased copper cylinders with indirect coils. The secondary circuit incorporates a thermostatic mixing valve. The inlet consists of a ball valve with strainer, inline non verifiable single check valve and mini shock arrestor. Cylinder are supplied with a factory fitted immersion heater. Maximum working pressure - secondary 6.0 bar, primary 2.2 bar. Maximum operating temperature - secondary is 60°C, primary 85°C

Section:

1390 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, open outlet.

WRAS Approval Number:

2107319

Size:

22mm compression (secondary) 1” BSP (F) primary

Marking:

Copper Industries, model name, model size, safety markings, manufacturers contact details, Maxi Pod, date of manufacture (DD/MM/YY) and ID no on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Maxi Pod 210 Maxi Pod 250 Maxi Pod 300

Product Images

Approval Holder:

Copper Industries Ltd

Company Name

Copper Industries Ltd

Address

Toome Business Park 21 Hillhead Road Toome Co Antrim

Postcode

BT41 3SF

Country

United Kingdom

Phone

02879 659736

General Email

mail@copperindustries.co.uk

View All Listings by this Company

Manufacturer:

Copper Industries Ltd

Company Name

Copper Industries Ltd

Address

Toome Business Park 21 Hillhead Road Toome Co Antrim

Postcode

BT41 3SF

Country

United Kingdom

Phone

02879 659736

General Email

mail@copperindustries.co.uk

View All Listings by this Company