Range of angled valves with chromium plated brass bodies, incorporating a non-rising spindle headwork or a quarter turn ceramic disc headwork with either triangle, cubic, single lever or dome type operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Non-rising spindle head with dome type operating members: AGV0112: ½” BSP (M) x ½” BSP (M), AGV0138: ½” BSP (M) x ⅜” BSP (M), AGV01A12: ½” BSP (M) x ½” BSP (M), AGV01A38: ½” BSP (M) x ⅜” BSP (M). ¼ turn ceramic disc headwork with dome type operating member: AGV4612: ½” BSP (F) x ½” BSP (M). ¼ turn ceramic disc headwork with single lever operating member: AGV2312: ½” BSP (M) x ½” BSP (M), AGV2312B: ½” BSP (M) x ½” BSP (M), AGV2338: ½” BSP (M) x ⅜” BSP (M). ¼ turn ceramic disc headwork with cubic operating member: AGV4812: ½” BSP (M) x ½” BSP (M), AGV4838: ½” BSP (M) x ⅜” BSP (M), AGV2512: ½” BSP (M) x ½” BSP (M), AGV2538: ½” BSP (M) x ⅜” BSP (M). ¼ turn ceramic disc headwork with triangle operating member: AGV05Q38: ½” BSP (M) x ⅜” BSP (M).

Product Images

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Room 610 New Oriental Times Building No. 1130 Biaizhang East Road Ningbo Zhejiang

Country

China

Phone

+86 0574 88001556

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Export Processing Zone, Beilun Bonded South Zone, Ningbo City, Zhejiang Province (No. 6 Zhufeng Road)

View All Listings by this Company

Range of pilot operated base valves, main body only, with epoxy coated ductile iron bodies and stainless-steel plugs. Maximum working pressure IDROMEMBRANA 16.0 & HYDROMODUL 25.0 Bar Maximum operating temperature IDROMEMBRANA 50.0°C and HYDROMODUL 80.0°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300 Flanged

Marking:

Technidro, DN, PN and model name on adhesive label on body. Flow arrow on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

IDROMEMBRANA HYDROMODUL

Product Images

Manufacturer:

Techidro S.R.L

Company Name

Techidro S.R.L

Address

VIA G GASTALDI 26F 16165 GENOVA ITALY

View All Listings by this Company

’TP Series 300’ and ‘TPE Series 300’ ranges of single stage in-line pumps with black coloured cataphoretic electro deposition coated cast iron or ductile iron bodies and bronze, stainless-steel or black coloured cataphoretic electro deposition coated cast iron impellers. Pumps are available with BQQE or BBQE shaft seals. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250607701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN32 - DN350 Flanged connections.

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model, PN-SN no., technical info and manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

30/06/2030

Model:

TP series 300: TP(E) XX-XXX/X [Blank] or S or NC - X or BX - F - A or B or S or O or Y or Q - XXXX * Where: TP = pump type with normal Asynchronous motor. TPE = pump type with E-motor (motor with integrated frequency driver). XX = nominal diameter of inlet and outlet ports, DN (32-350). XXX = maximum head [dm] (60-1050). /X = pole number (2, 4, 6). [Blank] or S or NC = Sensor options: [Blank] = without sensor, S = TPE with factory-fitted differential-pressure sensor, NC = TPE with Siemens/Nidec motor with integrated CUE (Grundfos brand of VSD). X or BX = B: Oversize motor, X: Special version. F = DIN flange. A or B or S or O or Y or Q = A: Basic version - Cast iron pump housing and impeller, B: Cast iron pump housing with bronze impeller, S: Cast iron pump housing with stainless steel impeller, O: Ductile cast iron pump housing with cast iron impeller, Y: Ductile cast iron pump housing with bronze impeller, Q = Ductile cast iron pump housing with stainless steel impeller. XXXX = shaft seal: BQQE or BBQE. * = Motor information, does not have any bearing on water contact parts.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002724

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

CWMA3 & CWMA5 : 1” BSP (F) inlet x 1” BSP (F) outlet. CWMA7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. CWMA9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. CWMA18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Winflo logo, model code and product technical information on data-plate.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

CMWA range model code: CMWAXX-Y(T) CMWA = Pump type. XX = Nominal flow rate m/3 per hour (3, 5, 7, 9 or 18). Y = Number of impellers. T = 3 phase or (blank) = single phase. CMWA3-2, CMWA3-3, CMWA3-4, CMWA3-5, CMWA3-6 & CMWA3-7. CMWA5-2, CMWA5-3, CMWA5-4, CMWA5-5, CMWA5-6 & CMWA5-7. CMWA7-2, CMWA7-3, CMWA7-4, CMWA7-5 & CMWA7-6. CMWA9-2, CMWA9-3, CMWA9-4 & CMWA9-5. CMWA3-2T, CMWA3-3T, CMWA3-4T, CMWA3-5T, CMWA3-6T & CMWA3-7T. CMWA5-2T, CMWA5-3T, CMWA5-4T, CMWA5-5T, CMWA5-6T & CMWA5-7T. CMWA7-2T, CMWA7-3T, CMWA7-4T, CMWA7-5T, CMWA7-6T & CMWA7-7T. CMWA9-2T, CMWA9-3T, CMWA9-4T & CMWA9-5T. CMWA18-2T, CMWA18-3T & CMWA18-4T.

Approval Holder:

Eautechnik GmbH

Company Name

Eautechnik GmbH

Country

Germany

View All Listings by this Company

Range of wall or ceiling mounted shower outlets with chromium plated bodies (or black body for 22123KF0) consisting of showers arms and shower head for installation with specific rough-in sets. Shower head bodies incorporate approved single check valve cartridges, however, the complete assemblies have not been tested to demonstrate it provides backflow protection. The 26.484 model rough-in set incorporates a plastic flow regulator on the inlet. Maximum working pressure: Open Outlet. Maximum operating temperature: 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250602028

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Any flow rates claimed by the manufacturer have not been verified

Size:

½” BSP (F).

Marking:

Showerheads: Grohe on face. Concealed bodies: Grohe, Date of manufacture (YYMMDD), Made in Germany on adhesive label inside plastic shell, Grohe, DR and Flow arrows on brass body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Grohe ‘RSH’ Cosmopolitan 310’ headshower sets 400mm: 26.475.xxx & 26.479.xxx. Grohe ‘RSH’ Smart Active 310’ headshower sets 400mm: 22123KF0 Concealed bodies (rough-in sets): 26.483 & 26.484 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise LS0 – moon white A00 – hard graphite

Product Images

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

View All Listings by this Company