Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #260402002

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined flexible hose assemblies with DZR brass end connections. Some models incorporate spherical valves. Pushfit and compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 260402002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: ‘Justlink’ (brand of Yuhuan Jianglin Plumbing Hose & Parts Inc.), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 30/04/2031
Model:: JL–A*B–XX–D–E–XXX. Where: A*B denotes connection size and type and can be replaced with any of the following options under each DN size (see below). XX denotes bore diameter of hose and can be replaced with any of the following: 06 = DN6, 08 = DN8, 10 = DN10, 13 = DN13, 19 = DN19. D denotes the outer braided material: SS = stainless steel wire SN = stainless steel wire plus black nylon wire N = Nylon wire E denotes the liner material: 0 = EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number, as examples: 015 = 15cm length, 100 = 100cm length, 200 = 200cm length. Size Codes: DN6 (denoted by 06) bore diameter available with the following end connections: 01 = F1/4, 02 = F1/4 elbow, 03 = M1/4, 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 19 = M8*(12-110) with single O-ring, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 26 = F15, 29 = 10mm compression, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 45 = M8*(12-110) with double O‐ring, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring. DN8 (denoted by 08) bore diameter available with the following end connections: 03 = M1/4, 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 19 = M8*(12-110) with single O-ring, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 26 = F15, 27 = 15mm smooth tube, 29 = 10mm compression, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 45 = M8*(12-110) with double O‐ring, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN10 (denoted by 10) bore diameter available with the following end connections: 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 26 = F15, 27 = 15mm smooth tube, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN13 (denoted by 13) bore diameter available with the following end connections: 04 = F3/8, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 27 = 15mm smooth tube, 28 = 22mm smooth tube, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 37 = 15mm pushfit, 38 = 22mm pushfit, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN19 (denoted by 19) bore diameter available with the following end connections: 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 19 = M8*(12-110) with single O-ring, 27 = 15mm smooth tube, 28 = 22mm smooth tube, 32 = 22mm compression, 34 = 22mm compression isolation valve, 38 = 22mm pushfit, 42 = 22mm pushfit isolation valve.

Product Images

Approval Holder:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company
Manufacturer:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

WRAS Approval Number: #260102015

Range of concealed flow controls (brass body with various finishes) incorporating two, quarter turn ceramic disc headworks with single lever operating members controlling the flow to an external outlet (not supplied). Model BK2 is a flow control with adjustable bracket and collection box. Model BK2A is a flow control with bracket. Model BK2B is a flow control. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:: 2000 Shower Valves
Section Subtitle:: Shower valve(s) with manual temperature control.
WRAS Approval Number:: 260102015
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Outlet hose must be installed where light is excluded. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: ½” captive nut end connections.
Marking:: Vola on operating member
Installation Requirements:: R001 R007 R009 R010 R040
Expiry date:: 31/01/2031
Model:: VOLA BK2, VOLA BK2A & VOLA BK2B VOLA BK2 – Mixer with Adjustable Bracket and water collection box VOLA BK2A – Mixer with Bracket VOLA BK2B – Mixer Alone Models with Brass and Stainless Steel operating members. Brass and Stainless Steel handles are available with different surface finishes. Suffix in the end of the product name indicate the surface finish and denotes: For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper. For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Silver, B61=Brushed Black, B64=Brushed Copper, B69=Brushed Silver, B70=Brushed Gold.

Approval Holder:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

WRAS Approval Number: #251088307

Section:: 2010 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/10/2030
Model:: RNDSCBV2.MB AQ150BAR2 300RSC TWBAR2.21 AQ150BAR2.MB TS150BAR2 126HP 126HP.MB AQSQBAR2 TSSQBAR2 408HP 300SSC AQSQBAR2.MB

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
RNDSCBV2.MB	Matt Black	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
AQ150BAR2	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
300RSC	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
TWBAR2.21	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
AQ150BAR2.MB	Matt Black	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
TS150BAR2	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
126HP	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
126HP.MB	Matt Black	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
AQSQBAR2	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
TSSQBAR2	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
408HP	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
300SSC	Chrome	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,
AQSQBAR2.MB	Matt Black	½”x ¾” BSP (M) offset unions or 15mm compression	5.0 bar	65 °C	Aqualisa	Valve Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable	Flow Regulator Fitted, Shower Hose, Handset, Fixed Head, Riser Rail,

Notes & Further Information: The “*” is for a different Overhead Shower, Shower Hose or Shower Handset, which represent the letters A to Z X XXX Denotes the following: First X: Different handle The second, third & fourth XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:: Aqualisa Products Ltd.

Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

WRAS Approval Number: #260113002

Range of wall mounted bar type thermostatic shower mixing valve with chromium plated brass body incorporating a non-rising spindle headwork with a dome operating member controlling the flow. The temperature is independently controlled via a thermostatic cartridge incorporating a manual over ride button with a dome type operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainer. Maximum working pressure 5.0 Bar, Maximum operating temperature 60 °C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 260113002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” X ¾” BSP (M) Offset unions
Marking:: Aqualisa on body
Installation Requirements:: R001 R010 R040
Expiry date:: 31/01/2031
Model:: 701936 701982

Approval Holder:: Aqualisa Products Ltd.

Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

WRAS Approval Number: #260302017

Range of wall mounted, concealed thermostatic shower valves incorporating 2 way or 3 way function with push button headworks controlling the flow to either shower outlets. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:: 2010 Shower Valves
Section Subtitle:: Shower valve(s) with thermostatic temperature control
WRAS Approval Number:: 260302017
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Must be installed in combination with Grohe Rapido SmartBox 35.600 or 35.5604
Size:: 1/2" BSP (F) inlets and outlets
Marking:: Grohe Logo on faceplate
Installation Requirements:: R001 R010 R040
Expiry date:: 31/03/2031
Model:: 29.121.xxx (Thermostat for concealed installation with 3 valves) & 29.119.xxx (Thermostat for concealed installation with 2 valves Must be installed in combination with Grohe Rapido SmartBox 35.600 or 35.5604 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit DL0 – brushed warm sunset GN0 – brushed cool sunrise MG0 – satin graphite MS0 – satin steel GL0 – cool sunrise BE0 – polished nickel EN0 – brushed nickel

Approval Holder:: Grohe AG

Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company