Directory Search Results

Print List

#250155021

'CP231200'. Factory applied, two-part water-based epoxy coating. Mix Parts A & B in a 5:1 weight ratio and apply as per manufacturer's instructions 'File No. HBB-01', 'Version: A', dated '2024.6.30'. Cure for 24 hours@26°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
250155021
Expiry date:
31/01/2030

Approval Holder:
Hebei Benlu Trading Co., Ltd.
Company Name
Hebei Benlu Trading Co., Ltd.
Address
B1004, Financial building, Zhongshan East Road, Chang'an District, Shijiazhuang, Hebei
Country
China

View All Listings by this Company

Print This Approval


#250155024

'Jotaguard VA 5001'. Factory applied, blue coloured epoxy coating. Apply as per manufacturers technical data sheet dated 9th November 2015. Cure for 2 minutes, 30 seconds@232°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
250155024
Expiry date:
31/01/2030

Approval Holder:
Jotun Boya San ve Tic A.S.
Company Name
Jotun Boya San ve Tic A.S.
Address
Gazi Osman Pasa, Organize Sanayi Bölgesi, Ulusoy Cd. No : 8, Çerkezköy, TR-59 59500
Country
Turkey

View All Listings by this Company

Print This Approval


#241255053

'TOHPEPOWDER#6150 SHK GRAY QD'. Factory applied, grey coloured epoxy coating. Apply as per Tohpe Corporation instructions no '4230904550B'. dated 'Jan 28, 2025'. Cure for 5 minutes@200°C. For use with water up to 65°C.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
241255053
Expiry date:
31/12/2029

Approval Holder:
Suiken Co., Ltd.
Company Name
Suiken Co., Ltd.
Address
206-7 Kitawaki, Hino-Cho, Gamo-gun, Shiga 529-1663
Country
Japan

View All Listings by this Company

Print This Approval


#241255063

'JERLAC Two Pack Epoxy Beige-740'. Factory applied, two-part, beige coloured epoxy coating. Mix in a 3:1 volume ratio and apply as per manufacturer's data sheet issue number '01', dated '10.01.2024'. Cure for 7 days@30°C. For use with water up to 85°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
241255063
Expiry date:
31/12/2029

Approval Holder:
M/S German Polymers and Coatings (PVTE) Limited
Company Name
M/S German Polymers and Coatings (PVTE) Limited
Address
No-18, Othivakkam Village Kumuzhi Panchayat, Chengalpet District, Pin-603202, Tami Nadu
Country
India

View All Listings by this Company

Print This Approval


#250155044

‘Hempadur 35530 System’. Grey coloured, factory applied, two-component epoxy coating comprising of ‘Hempadur 35530 red (51320) and Hempadur 35530 grey (10500)’. ‘Hempadur 35530 red (51320)’ comprises of a base and curing agent which are mixed in a 3:1 volume ratio. ‘Hempadur 35530 grey (10500)’ comprises of a base and curing agent which are mixed in a 3:1 volume ratio. Apply as per manufacturer's Product Data Sheet dated October 2024. Cure for 7 days@20°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
250155044
Expiry date:
31/01/2030

Approval Holder:
Hempel A/S
Company Name
Hempel A/S
Address
Lundtoftevej 150, DK-2800, Lyngby
Country
Denmark
Phone
+45 4593 3800 Fax: +45 4288 5518

View All Listings by this Company

Print This Approval


#250155047

'Nylon 11'. Factory applied nylon coatings available in white or grey colours. The substrate the coating is to be applied to is heated to 310°C for 30 minutes and the coating applied as per manufacturer's work instructions 'WI-09-19 Rev. 6' dated April 22, 2020. Cure for 10 minutes@270°C. The white coating is for use with water up to 23°C. The grey coating is for use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
250155047
Expiry date:
31/01/2030

Approval Holder:
Bray Controls UK Ltd.
Company Name
Bray Controls UK Ltd.
Address
16 - 18 Fountain Crescent, Renfrew
Postcode
PA4 9RE

View All Listings by this Company

Print This Approval


#250155054

'Jindal Saw Limited Ordinary Portland Cement - 53 Grade'. Factory applied, grey coloured Ordinary Portland Cement. Mix cement, sand & water in a xx ratio of 1:1.5:0.5 and apply as per manufacturer's Work Instructions 'JSAW/AP01/DISP/PRO/WI-09', version '2.0', effective date '01.05.2023'. Cure for 2.5 hours@48°C and then 3 days@30°C. For use with water up to 60°C.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
250155054
Expiry date:
31/01/2030

Approval Holder:
Jindal Saw Ltd. (AP01),
Company Name
Jindal Saw Ltd. (AP01),
Address
Haresamudram Village, Bommanahal Mondal, Anantapuram District, Andhra Pradesh - 515871
Country
India

View All Listings by this Company

Print This Approval


#250155062

'SikaTop®-107 Seal AE'. Site applied, grey coloured, two-part coating. Mix parts A and B in a 1.4 weight ratio and apply as per manufacturer's Method Statement 'V1', dated 'Feb 2025'. Cure Coat 1 for 3 hours at 30°C. Cure Coat 2 for 21 days at 30°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5038 Coatings, Paints & Linings
Section Subtitle:
Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
250155062
Expiry date:
31/01/2030

Approval Holder:
Sika UAE L.L.C
Company Name
Sika UAE L.L.C
Address
P O Box 126212, Saih Shuaib 4 (533), Dubai Industrial City (DIC), Plot 61 (533-279), Dubai
Country
United Arab Emirates
Phone
+971 4 439 8200
General Email
sika.uae@ae.sika.com

View All Listings by this Company

Print This Approval


#250155028

'KLINGERSIL® C-4430'. NBR/fibre gasket material, which is green coloured one side and white coloured the other, manufactured by calandering. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Section:
5075 Fibre
Section Subtitle:
These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.
WRAS Approval Number:
250155028
Expiry date:
31/01/2030

Approval Holder:
Rich. Klinger Dichtungstechnik GmbH & Co. KG
Company Name
Rich. Klinger Dichtungstechnik GmbH & Co. KG
Address
Am Kanal 8-10, A - 2352 Gumpoldskirchen
Country
Austria
Phone
+43 (0)2252-62599-137 Fax: +43 2252 62599-296

View All Listings by this Company

Print This Approval


#250255020

'MS Schramberg Sintered Strontium Ferrite (10-1173001)'. Grey coloured Sintered Strontium Ferrite ring component. For use with water up to 85°C.

Section:
5165 Magnetic Material
Expiry date:
28/02/2030

Approval Holder:
MS Schramberg GmbH & Co. KG
Company Name
MS Schramberg GmbH & Co. KG
Address
Max-Planck-Str. 15, 78713 Schramberg
Country
Germany

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 182 of 215

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.