Directory Search Results

Print List

#250515701

Range of single-hole, multiple outlet, swivel, combination tap assemblies (brass bodies - various finishes, see model) with a pull-out spout. The product is designed to dispense near boiling filtered water or filtered water using a ½ turn ceramic disc headwork, (¼ turn anticlockwise via a spring loaded lever for near boiling water, and ¼ turn clockwise for filtered water). The product also incorporates a ceramic cartridge headwork for hot and cold supplies with a single lever operating member. The pull-out spout incorporates a plastic aerator for the hot and cold water pathway and an integral brass insert for the near boiling/filtered water pathway. Maximum working pressure 8.0 bar. Maximum operating temperatures: 85°C, and 98°C for the near boiling/filtered water pathway (after the boiler).

Section:
0683 Combination Tap Assemblies
Section Subtitle:
Multiple Function tap(s). In addition to normal tap function includes at least one of following functions chilled, filtered, carbonated, instantaneous hot water.
WRAS Approval Number:
250515701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The near boiling water heater and filter must be purchased separately and are not covered under the scope of this approval.
Size:
Cold supply: ½” captive nut to tee connector. Hot supply: Stainless steel braided PEX lined flexible inlet hose assembly incorporating a ½” captive nut end connection.
Marking:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd logo (‘NLB’) on body.
Installation Requirements:
R001 R007 R009 R090
Expiry date:
31/05/2030
Proviso:
The near boiling water heater and filter must be purchased separately and are not covered under the scope of this approval.
Model:
14043** & 14043A** ** represent different finishes No suffix: Chrome plated H: Black, N: Nickel brushed, GJS: Zirconium gold brushed, G: Zirconium gold, QTSL: Brushed bronze bright, QTS: Brushed bronze matte, TJ: Titanium gold, TJLS: Titanium gold brushed, MGJ: Rose gold, MGJL: Rose gold brushed, HGT: Red bronze, HTL: Yellow bronze brushed, HTS: Red bronze brushed, PVDQH: Gun grey, HQ: Gun grey brushed, Q: Bronze, DYB: Matte white, STS: Acid copper brushed, BZ: Spray pearl white, DMGJ: Light rose gold brushed.
Product Images

Approval Holder:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU
Country
China

View All Listings by this Company
Manufacturer:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU
Country
China

View All Listings by this Company

Print This Approval


#250502014

Deck mounted pillar tap, (chrome plated brass) body. The flow is controlled by a solenoid valve which is actuated manually via rotary control switch using cross top operating members. Maximum working pressure 5.0 Bar Maximum operating temperature 85.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
250502014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Push fit connections are only approved for use with copper pipe manufactured to BS EN 1057
Size:
15mm Pushfit
Marking:
Wallgate logo on tap body
Installation Requirements:
R001 R006
Expiry date:
31/05/2030
Model:
E-Suite
Product Images

Approval Holder:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane, Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company

Print This Approval


#250502024

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies, various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection or 10mm copper tail (see models). Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
250502024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are not supplied with anything to connect between the solenoid valves (15mm compression) and the copper tails (10mm spigot) or the braided hose (15mm spigot), this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression
Marking:
DVS logo on body
Installation Requirements:
R001 R006 R007 R010
Expiry date:
31/05/2030
Model:
Aquarius A32: AT03-001 (Stainless steel and braided hose) AT03-002 (Stainless steel and copper tails) AT03-003 (Polished stainless steel and braided hose) AT03-004 (Polished stainless steel and copper tails) Aquarius A45: AT03-011 (Stainless steel and braided hose) AT03-012 (Stainless steel and copper tails) AT03-013 (Polished stainless steel and braided hose) AT03-014 (Polished stainless steel and copper tails) Aquarius A45 Doc M: AT03-021 (Stainless steel and braided hose) AT03-022 (Stainless steel and copper tails) AT03-023 (Polished stainless steel and braided hose) AT03-024 (Polished stainless steel and copper tails) Aquarius Short Neck: AT03-031 (Stainless steel and braided hose) AT03-032 (Stainless steel and copper tails) AT03-033 (Polished stainless steel and braided hose) AT03-034 (Polished stainless steel and copper tails) Aquarius High Neck: AT03-041 (Stainless steel and braided hose) AT03-043 (Polished stainless steel and braided hose) Aquarius Pillar Tap: AT03-051 (Chrome and braided hose) AT03-061 (Chrome and braided hose)
Product Images

Approval Holder:
KWC DVS Ltd.
Company Name
KWC DVS Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company
Manufacturer:
KWC DVS Ltd.
Company Name
KWC DVS Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#250104717

Bottom entry BS1212-4 (2016) compact type float operated valves for use with WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
250104717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
13½” BSP1/2” (M) Plastic, BSP1/2” (M) Brass 11½” BSP1/2” (M) Plastic, BSP1/2” (M) Brass 10” BSP1/2” (M) Plastic, BSP1/2” (M) Brass
Marking:
Flomasta, BS1212-4 and datum level on body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/01/2030
Model:
50593400659535 & 5059340124025

Approval Holder:
Kingfisher International Products Ltd
Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#250504705

Bottom entry BS1212 part 4 (2016) compact type float operated inlet valve for WCs flushing cistern having a plastic body and adjustable float and plastic filter at the inlet. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
250504705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Siamp, BS1212-4, WRAS & manufacturing date clock MM/YY on the float.
Installation Requirements:
R001 R550 R560 R562
Expiry date:
31/05/2030
Model:
Compact 99 Airgap
Product Images

Manufacturer:
Siamp
Company Name
Siamp
Address
4 Quai Antoine Premier BP 219 MC 98007
Country
Monaco
Phone
Tel: +377 9315 5375 Fax: +377 9205 7104

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1795 of 2039

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.