Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #260304007

Range of pillar taps, (chromium plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 1800 Taps
Section Subtitle:: Pillar tap(s).
WRAS Approval Number:: 260304007
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: KRB101: ½” BSP (M), KRB102: ¾” BSP (M).
Marking:: DTC 53 and DEVA on body and operating member.
Installation Requirements:: R001 R006
Expiry date:: 31/03/2031
Model:: KRB101 - Kirby Basin Taps (Pair), KRB102 - Kirby Bath Taps (Pair).

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #260315309

Section:: 1800 Taps
Description:: A Range of Pillar tap(s).
Deck Mounted Capable of Achieving AUK2 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R005
Expiry date:: 31/03/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
61408	Chrome plated	3/4" BSP (M)	10 bar	85 °C	Bokeya	Rear of Body	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener
61108	Chrome plated	3/4" BSP (M)	10 bar	85 °C	Bokeya	Rear of Body	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener
51508AQ	Chrome plated	3/4" BSP (M)	10 bar	85 °C	Bokeya	Rear of Body	No	1/4 Turn ceramic disc	Metal Backnuts	Flow Straightener

Approval Holder:: Yuhuan Bokeya Sanitary Ware Technology Co., Ltd.

Company Name
Yuhuan Bokeya Sanitary Ware Technology Co., Ltd.
Address
Saozhoushan Industrial Zone Qinggang Town, Yuhuan, Zhejiang
Postcode
317600
Country
China
General Email
105069040@qq.com

View All Listings by this Company
Manufacturers:: Yuhuan Bokeya Sanitary Ware Technology Co., Ltd

WRAS Approval Number: #260304015

Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum operating pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 260304015
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: FQR, last 2 digits of the year of production, DN and WRAS on ferrule.
Installation Requirements:: R001
Expiry date:: 31/03/2031
Model:: DN6W : 8x1, 10x1, 11x1, 12x1 15x1, F3/8”, F1/2”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2”, F3/8" c/curva P6W : 8x1, 10x1, 11x1, 12x1 15x1, F3/8”, F1/2”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2”, F3/8" c/curva DN8W: 10x1, 11x1, 12x1, 15x1, F3/8”, F1/2”, F3/4”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2”, F3/8" c/curva, F3/4" c/curva P9W: 10x1, 11x1, 12x1, 15x1, F3/8”, F1/2”, F3/4”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2”, F3/8" c/curva, F3/4" c/curva DN10W: 12x1, F3/8”, F1/2”, F¾”, M3/8”, M1/2”, NPB15, 15c.o, F1/2” c/curva, FC1/2”, F3/8" c/curva, F3/4" c/curva DN13W: F1/2” F¾”, M1/2”, M3/4, F1/2” c/curva, F3/4" c/curva

Approval Holder:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 Briga Novarese (No)
Postcode
28010
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company

WRAS Approval Number: #260302706

Range of “Tempest” Indirect and direct unvented storage cylinders consisting of factory fitted single or twin coil circuit with either a primary or solar coil. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar@90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures: Secondary circuit 3.0 bar, Primary Circuit 5.5 bar & Solar circuit 5.5 bar. Maximum operating temperature 70°C.

Section:: 1890 Unvented Heating Apparatus
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Telford logo & TEMPEST on body. D.O.M (DD.MM.YYYY), Serial number, Capacity, Max working temp, Max working pressure and other technical information on label on body
Installation Requirements:: R001
Expiry date:: 31/03/2031
Model:: TSMDXXX Tempest Stainless Direct Direct Electric Only Unvented Hot Water Cylinder - 22mm TSMIXXX Tempest Stainless Indirect Indirect Unvented Hot Water Cylinder - 22mm TSMIXXXH Tempest Stainless Indirect Horizontal Indirect Horizontal Unvented Hot Water Cylinder - 22mm TSMIXXX/HP Tempest Stainless Indirect Heat Pump Indirect Unvented Hot Water Cylinder with coil suitable for Heat Pump - 22mm TSMIXXX/S Tempest Stainless Indirect Solar Thermal Indirect Unvented Hot Water Cylinder with additional coil suitable for Solar Thermal - 22mm TSMIXXX/HP Tempest Stainless Indirect Heat Pump 400-500L Indirect Unvented Hot Water Cylinder with coil suitable for Heat Pump 1 Inch (F) TSMIXXX/S Tempest Stainless Indirect Solar Thermal 400-500L Indirect Unvented Hot Water Cylinder with additional coil suitable for Solar Thermal - 1 Inch (F)

Approval Holder:: Telford Copper & Stainless Cylinders Ltd

Company Name
Telford Copper & Stainless Cylinders Ltd
Address
Unit 22 Furrows Business Park Haybridge Road
Postcode
TF1 2DF
Country
Wellington

View All Listings by this Company

WRAS Approval Number: #260308002

Range of wall mounted, concealed, manually operated blending valves, (brass bodies - various finish trim kits), incorporating ceramic cartridge headworks with single lever operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 2000 Shower Valves
Section Subtitle:: Shower valve(s) with manual temperature control.
WRAS Approval Number:: 260308002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: BDM-MIX-C410-T1 - ½’’ BSP (F), BDM-MIX-C315-C410-T2 - ½” BSP (F).
Marking:: BAGNODESIGN on faceplate.
Installation Requirements:: R001 R010 R040
Expiry date:: 31/03/2031
Model:: BDM-MIX-C410-T1 concealed rough for use with- BDM-CND-E410-XX Conrad trim set BDM-MEZ-E410-B-XX Mezzanine trim set BDM-MLP-E410-XX M-Line Diffusion trim set BDM-NAR-E410-CP Nara trim set BDM-VIT-E410-XX Vitesse trim set BDM-MIX-C315—C410-T2 concealed rough for use with – BDM-BIS-E410L-XX Bristol trim set BDM-CRL-E410-XX Carlyle trim set BDM-FTY-E410-XX Fonteyn trim set BDM-MLI-E410-XX M-Line trim set BDM-REV-E410-XX Revolution trim set BDM-TOK-E410-XX Toko trim set XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company