Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240902027

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled with a solenoid valve activated via touch operation. Temperature is controlled using a manual single lever operating member. The spout outlets incorporate plastic aerators. The inlets incorporate an approved check valve cartridge; however the complete assemblies have not been fully tested to demonstrate they provide backflow protection, and a stainless steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:: 0684 Combination Tap Assemblies
Section Subtitle:: Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:: 240902027
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided PEX lined flexible hose assemblies with a 3/8" BSP captive nut end connector.
Marking:: Stern on body
Installation Requirements:: R001 R006 R010
Expiry date:: 30/09/2029
Model:: Green Time 1000B AB1953 (two inlets, battery powered) Green Time 1000E AB1953 (two inlets, transformer powered) Green Time 1000 AB1953 (two inlets, transformer powered)

Approval Holder:: Y. Stern Engineering (1989) Ltd

Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

WRAS Approval Number: #240904722

Bottom entry A1370A and side entry A1423B BS1212-4 (2016) compact type float operated valves for WC flushing cisterns. The inlet incorporates a strainer. A1270A - plastic or brass connector. A1423B - plastic connector only. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2075 Float Operated Inlet Valve
Section Subtitle:: Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:: 240904722
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: IRN R560 Only applies to the bottom entry valve.
Size:: ½” BSP (M)
Marking:: R&T, model & BS1212-4 & datum level on body.
Installation Requirements:: R001 R550 R560
Expiry date:: 30/09/2029
Model:: A1370A 13½” A1370A 11½” A1423B

Product Images

Approval Holder:: Xiamen R&T Plumbing Technology Co.,Ltd

Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company
Manufacturer:: Xiamen R&T Plumbing Technology Co.,Ltd

Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company

WRAS Approval Number: #240902044

Range of floor mounted single hole, single outlet (fixed), combination tap assembly (various plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet with a dome type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 0675 Combination Tap Assemblies
Section Subtitle:: Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:: 240902044
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.
Marking:: Lanbiao on operating member
Installation Requirements:: R001 R020
Expiry date:: 30/09/2029
Model:: F9918-XX Where XX denotes the finish and can be replaced with any of the following: No Suffix = Chrome H = Black DYB = Matte White BZ = Perl White Painted HGTS = Red Bronze HTL = Yellow Bronze Brushed Q = Bronze QTSL = Bronze Brushed Bright WTS = Bronze Brushed Matte STS = Acid Copper Brushed SDMGJ = Water Plated Rose Gold N = Nickel Brushed Bright Light NP = Nickel Brushed TJ = Titanium Gold TJLS = Titanium Gold Brushed G = Gold GJS = Gold Brushed GJSY = Zirconium Gold Wire Drawing Matte PGJFY = Zirconium Gold Wire Drawing Matte Bright Light PLSJ = Brushed Gold LSJY = Brushed Gold Matte MGJ = Rose GHold MGJL = Rose Gold Brushed DMGJ = Light Rose Gold Brushed HTS = Red Bronze Brushed QHP = Grey LSQH = Grey Brushed LHMGJ = Brushed Yellow Rose Gold

Product Images

Approval Holder:: TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company
Manufacturer:: TAIZHOU LANBIAO SANITARY WARE CO., LTD

Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company

WRAS Approval Number: #241002004

Thermostatic cartridge incorporating a plastic body and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 0442 Thermostatic cartridges
Section Subtitle:: Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:: 241002004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 30mm O.D.
Marking:: HG on body.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: 30615930.

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #240903007

Range of single-hole, single outlet fixed combination tap assemblies (chrome plated brass), incorporating quarter turn ceramic disc headworks with cross-top operating members. The spout outlet incorporates plastic flow straighteners. The products incorporate lever operated pop-up wastes (not verified by test). Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 0450 Combination Tap Assemblies
Section Subtitle:: Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:: 240903007
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm Copper Tails
Marking:: Heritage on indices.
Installation Requirements:: R001 R006 R010
Expiry date:: 30/09/2029
Model:: TDCC04 TDCG04

Product Images

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company