Directory Search Results

Print List

#250702003

Range of shower hoses with PVC outer (various finishes) and TPE liner. Maximum operating temperature 65.0°C. Open outlet use only.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
250702003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP captive nut connection inlet x outlet
Marking:
Hansgrohe or AXOR (brand of Hansgrohe) on captive nut.
Installation Requirements:
R001
Expiry date:
31/07/2030
Model:
28 278 xx0 hansgrohe Isiflex 30 7237 xx hansgrohe Isiflex 30 3308 xx hansgrohe Isiflex 28 272 xx0 hansgrohe Isiflex 30 3312 xx hansgrohe Isiflex 30 1820 xx hansgrohe Isiflex 33 1820 xx hansgrohe Isiflex 28 622 xx0 AXOR 28 712 xx2 hansgrohe Isiflex 30 3315 xx hansgrohe Isiflex 31 9221 xx hansgrohe Isiflex 33 9221 xx hansgrohe Isiflex 28 276 xx0 hansgrohe Isiflex 30 3215 xx AXOR 28 626 xx0 AXOR 30 3316 xx hansgrohe Isiflex 33 1821 xx hansgrohe Isiflex 30 1821 xx hansgrohe Isiflex 34 1821 xx hansgrohe Isiflex 36 1821 xx hansgrohe Isiflex 28 713 xx2 hansgrohe Isiflex 30 2130 xx hansgrohe Isiflex 33 2130 xx hansgrohe Isiflex 30 3317 xx hansgrohe Isiflex 32 2130 xx hansgrohe Isiflex 28 274 xxx hansgrohe Isiflex 30 1822 xx hansgrohe Isiflex 30 8996 xx hansgrohe Isiflex 28 624 xx0 AXOR 31 1822 xx hansgrohe Isiflex 30 3320 xx hansgrohe Isiflex Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#250488001

Range of PVC outer layer shower hoses with a PVC internal layer and EPDM washers. Open outlet use only. Maximum operating temperature:60C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
250488001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) Captive nut.
Marking:
PPI on ferrule
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
SHP(D)(C)-A-B-L-F (SHP(08/10)(B/S)–Connection A - Connection B– Length - different finish) SHP – The name of our Shower Tube D(08/10) – 08=DN8 or 10=DN10 C(B/S) –B=Brass Core or S=Stainless Steel Core A-B – Connection A and Connection B (from 01 to 04) 01 = F1/2 Conical Connection Housing with O-ring nut, 02 = F1/2 Conical Connection, 03 = F1/2 cone-shaped connection anti winding with O-ring nut & 04 = F1/2 cone-shaped connection anti winding L (XXX) Length (15cm to 200cm): 015=15cm 200=200cm F (XXX) different finish: Silvery White = No suffix, Brushed brass = BGP, PVD Gold = PVD, Matt black = MBK & Gun Metal = GMG For example: "SHP08B-01-04-150 :would be for DN8,Brass Core, F1/2 Conical Connection Housing with O-ring nut x F1/2 cone-shaped connection anti winding , 150cm long, silvery white Finish"

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#250488003

Range of wall mounted, or concealed manually operated blending valves, (brass bodies – various finishes), incorporating a ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. Maximum working pressure 5 bar. Maximum operating temperature 85°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
250488003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm Compression
Marking:
PPI on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2030
Model:
M980116 X XXX X XXX Denotes the following: First X: Different handle option & face plate and the second, third & fourth XXX for different finishes: Handles/Face plate : without suffix indicates no handle / different handle and plate option – A & B (Lever type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#250302018

Range of wall mounted thermostatic bar shower mixers ((brass bodies - various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with single lever type operating members. Models come with either 2,3 or 4 push type headworks for different functions. The inlet incorporates approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Products are supplied with a shower handset, shower hose. The products need to be installed in combination with a specific basic set. 12 571 xx0= 18310180 Basic set for thermostatic module Select for 2 functions (WRAS 2207061) 12 572 xx0= 18311180 Basic set for thermostatic module Select for 3 functions (WRAS 2207061) 12 573 xx0= 18312180 Basic set for thermostatic module Select for 4 functions (WRAS 2207061) Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250302018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
To be used with basic set Hansgrohe 18 312 180
Marking:
AXOR on face plate and shower handset
Installation Requirements:
R001 R040
Expiry date:
31/03/2030
Model:
12 571 xx0 12 572 xx0 12 573 xx0 Note: Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#250302019

Wall mounted thermostatic shower panel ((brass bodies - various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow with single lever type operating members. The temperature is controlled independently via a thermostatic cartridge with single lever type operating members. Model has 3 push type headworks for different functions. The inlet incorporates approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). Products are supplied with a shower handset, shower hose. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250302019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
For use with various rough kits that are 3/4" BSP (F) or 1/2" BSP (F) inlet/outlet
Marking:
AXOR on shower handset and trim set
Installation Requirements:
R001 R040
Expiry date:
31/03/2030
Model:
12 595 xxx Product must be installed with AXOR shower composition basic set 12 676 180 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1709 of 2039

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.