Range of latching (LV), proportional (PV), servo (SV), pilot (EV) solenoid valves with natural (appear white), plastic bodies. Valves with black coloured plastic bodies (incorporating a biocide) were added to the approval in January 2026. Pushfit models are for use with John Guest LLDPE and DMFIT LLDPE pipes. The inlets and outlets of all models are available with plastic flow regulators or plastic or copper strainers. All valves have a maximum working pressure of 10.0 bar. The bodies of valves with a silicone diaphragm are marked with an ‘S’ at the end of the model, e.g. ‘EV118/AS’ and have a maximum operating temperature 85°C. Valves with an EPDM diaphragm are for cold water use only and do not include this ‘S’ marking.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

240902713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The bodies of the black valves incorporate a biocide and may fall under the scope of the GB Biocidal Products Regulations. R008 applies to the valves with the natural (appear white) bodies. It doesn't apply to the valves with black bodies.

Size:

Please refer to model.

Marking:

Hydra and model on body. EV118/IS Model Added March 2026: Eki d.o.o on body. eki, model and date of manufacture (DD/MM/YYYY) on adhesive label on body.

Installation Requirements:

R001 R008

Expiry date:

30/09/2029

Model:

EV - Standard (pilot operated) Solenoid Valve - Electrically Operated 220/240, 110/120 VAC. 24, 12 AC/DC LV - Latching (Bi-Stable) Solenoid Valve - Latching (Pulse) Operated 6, 12 VDC PV - Proportional Solenoid Valve - Proportional Operated 12, 24 VDC SV - Servo Solenoid Valve Servo Assisted 12 VDC KEY example – LV118/A LV – Valve type. Outlet number: XX1XX/X: one outlet XX2XX/X: two outlets XX3XX/X: three outlets Outlet angle: XXX18/X: 180 degrees (straight) XXX09/X: 90 degrees (elbow) Body type: XXXXX/xxnn: Variations: XX118/A (3/4" BSP x Ø11mm BARB) XX118/B (Ø3/8" x Ø3/8" PUSHFIT) XX118/C (3/8" BSP x 3/8" BSP) XX118/D (15mm COMPRESSION x 15mm COMPRESSION) XX118/E (3/4" BSP x 3/4" BSP) XX118/EB38 (3/4" BSP x 3/8" PUSHFIT) XX118/EB08 (3/4" BSP x 8mm PUSHFIT) XX118/EB06 (3/4" BSP x 6mm PUSHFIT) XX118/EB14 (3/4" BSP x 1/4" PUSHFIT) XX118/F (3/4" BSP x Ø10mm TUBE) XX118/FE (3/4" BSP x Ø3/8" TUBE) XX118/G (1/2" BSP x 1/2" BSP – SHORT THREAD -14.25MM) XX118/H (3/4" BSP x Ø6mm BARB) XX118/HP (3/4" BSP x Ø11mm BARB + SNAP BRACKET) XX118/HP14 (3/4" BSPM x 1/4" PUSHFIT + SNAP BRACKET) XX118/K (Ø8mm x Ø8mm PUSHFIT) XX118/L (Ø10mm x Ø10mm PUSHFIT) XX118/M (1/2" BSP x 1/2" BSP - LONG) XX118/N (Ø8mm x Ø10mm PUSHFIT) XX118/O (1/2" BSP x 1/2" BSP) XX118/P (Ø3/8" x Ø5/16" PUSHFIT) XX118/S (Ø8mm x Ø6mm PUSHFIT) XX118/T (Ø6mm x Ø6mm PUSHFIT) XX118/U (¼” JG x ¼” JG) XX118/J (3/4" BSP x Ø13mm BARB) XX109/B (3/4" BSP x Ø13mm BARB) XX109/D (3/8" PUSHFIT x 1/4" PUSHFIT) XX109/A (3/4" BSP x Ø11mm BARB) XX209/A (3/4" BSP x Ø11mm BARB) XX209/B (3/4" BSP x Ø13mm BARB) XX218/A (3/4" BSP x Ø11mm BARB) XX218/B (3/4" BSP x Ø10mm TUBE) XX218/C (3/4" BSP x Ø13mm BARB) XX218/D (3/4" BSP x Ø10mm TUBE + Ø11mm BARB) XX218/E (3/4" BSP x Ø3/8" PUSHFIT) XX218/HP (3/4" BSP x Ø11mm BARB + SNAP BRACKET) XX109/SA SAD VALVE (3/4" BSP x Ø11mm BARB) NOTES: Outlet Number: XX1XX/X: One Outlet XX2XX/X: Two Outlets XX3XX/X: Three Outlets Outlet angle: XXX18/X: 180 degrees (straight) XXX09/X: 90 degrees (elbow) Body Type: XXXXX/xxnn: Body type. Model Added March 2026: EV118/IS (3/4" BSP male inlet x 10mm spigot outlet).

Approval Holder:

Hydralectric Ltd.

Company Name

Hydralectric Ltd.

Address

5 High Road, Byfleet, Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

General Email

jamie.balkwill@hydralectric.com

View All Listings by this Company

Manufacturer:

EKI doo

Company Name

EKI doo

Address

Majer 27, 8340 Crnomelj

Country

Slovenia

General Email

View All Listings by this Company

Range of spherical valves with nickel plated brass bodies, incorporating a chrome plated brass ball, PTFE seats with either lever, butterfly or T operating members. Maximum working pressure 20.0 bar. Maximum operating temperature 85˚C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

240904030

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Tesla logo, size, CE and DN cast on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

GB/BVL112B Lever Ball Valve Lever ball valve EN331 FxF 1.1/2" blue handle GB/BVL112R Lever Ball Valve Lever ball valve EN331 FxF 1.1/2" red handle GB/BVL114B Lever Ball Valve Lever ball valve EN331 FxF 1.1/4" blue handle GB/BVL114R Lever Ball Valve Lever ball valve EN331 FxF 1.1/4" red handle GB/BVL12B Lever Ball Valve Lever ball valve EN331 FxF 1/2" blue handle GB/BVL12R Lever Ball Valve Lever ball valve EN331 FxF 1/2" red handle GB/BVL14B Lever Ball Valve Lever ball valve EN331 FxF 1/4" blue handle GB/BVL14R Lever Ball Valve Lever ball valve EN331 FxF 1/4" red handle GB/BVL1B Lever Ball Valve Lever ball valve EN331 FxF 1" blue handle GB/BVL1R Lever Ball Valve Lever ball valve EN331 FxF 1" red handle GB/BVL2B Lever Ball Valve Lever ball valve EN331 FxF 2" blue handle GB/BVL2R Lever Ball Valve Lever ball valve EN331 FxF 2" red handle GB/BVL34B Lever Ball Valve Lever ball valve EN331 FxF 3/4" blue handle GB/BVL34R Lever Ball Valve Lever ball valve EN331 FxF 3/4" red handle GB/BVL38B Lever Ball Valve Lever ball valve EN331 FxF 3/8" blue handle GB/BVL38R Lever Ball Valve Lever ball valve EN331 FxF 3/8" red handle GB/BVT12B T-Handle Ball Valve T-handle ball valve EN331 FxF 1/2" Blue Handle GB/BVT14B T-Handle Ball Valve Butterfly handle lever ball valve EN331 FxF 1/4" blue handle GB/BVT14R T-Handle Ball Valve T-handle ball valve EN331 FxF 1/4" red handle GB/BVT15B T-Handle Ball Valve T-handle ball valve EN331 CxC 15mm blue handle GB/BVT15R T-Handle Ball Valve T-handle ball valve EN331 CxC 15mm red handle GB/BVT1R T-Handle Ball Valve Butterfly handle lever ball valve EN331 FxF 1" red GB/BVT34R T-Handle Ball Valve T-handle ball valve EN331 FxF 3/4" red handle GB/BVT38B T-Handle Ball Valve T-handle ball valve EN331 FxF 3/8" Blue Handle GB/BVT38R T-Handle Ball Valve T-handle ball valve EN331 FxF 3/8" Red Handle GB/BVL15B Lever Ball Valve Lever ball valve EN331 CxC 15mm blue handle GB/BVL15R Lever Ball Valve Lever ball valve EN331 CxC 15mm red handle

Approval Holder:

Tesla UK Ltd.

Company Name

Tesla UK Ltd.

Address

Unit 3B First Avenue, Minworth, Sutton Coldfield

Postcode

B76 1BA

View All Listings by this Company

‘Instantor’ range of lever operated spherical valves with brass bodies and balls (chromium plated), incorporating PTFE seats, EPDM ‘o’ rings single lever handles (red or blue). For use with imperial Irish copper pipe (manufactured to IS EN 1057). Maximum working pressure 16 bar. Maximum operating temperature 85°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

241004038

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Instantor and product info on lever. Sanbra logo, DN & PN on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

771788 – 1/2” (14.7mm) compression, 771789 – 3/4” (21mm) compression, 771790 – 1” (27.4mm) compression. Lever handles are either a Red or Blue PVC finish - denoted with a ‘R or a ‘B’ at end of the codes.

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Instantor Works Santry Avenue Dublin

Postcode

D09 K160

Country

Ireland

Phone

+353(0)1 842 6255

General Email

Ryan.Charleson@Instantor.ie

View All Listings by this Company

Range of spherical valves with PVC-U or ABS bodies and ball (see models).. PVC-U models with a solvent weld pipe connection are for use with PVC-U pipe (manufactured to ISO 1452) and are supplied with a PVC-U solvent cement. ABS models with a solvent weld pipe connection are for use with ABS pipe (manufactured to ISO 15493) and are supplied with an ABS solvent cement. Maximum working pressure 16.0 Bar. Cold water use only.

Section:

2270 Valves

Section Subtitle:

Spherical, plastic.

WRAS Approval Number:

240702041

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Solvent weld pipe connection: ⅜”-4” and 16-110mm (see model). Threaded: ⅜” - 4” BSPP (F) (see model). Flanged: DN15 - DN100 (see model).

Marking:

FIP logo, pressure, size, material and other technical information on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

DualBlock VKDLV Manual Valve - 2-way Ball valve with BS series female ends for solvent welding PVC-U: H0 DKE 101: ⅜”, H0 DKE 102: ½”, H0 DKE 103: ¾”, H0 DKE 104: 1”, H0 DKE 105: 1 1/4”, H0 DKE 106: 1 ½”, H0 DKE 107: 2”, H0 DKE 312: 2 ½”, H0 DKE 109: 3”, H0 DKE 110: 4”. DualBlock VKDLA Manual Valve - 2-way Ball valve with BS series female ends for solvent welding ABS: H0 DKA 101: ⅜”, H0 DKA 102: ½”, H0 DKA 103: ¾”, H0 DKA 104: 1”, H0 DKA 105: 1 1/4”, H0 DKA 106: 1 ½”, H0 DKA 107: 2”, H0 DKA 312: 2 ½”, H0 DKA 109: 3”, H0 DKA 110: 4”. DualBlock VKDLV – SH Manual Valve - 2-way Ball valve with BS series female ends for solvent welding PVC-U with lockable handle: H0 DLE 101: ⅜”, H0 DLE 102: ½”, H0 DLE 103: ¾”, H0 DLE 104: 1”, H0 DLE 105: 1 ¼”, H0 DLE 106: 1 ½”, H0 DLE 107: 2”. DualBlock VKDLA – SH Manual Valve - 2-way Ball valve with BS series female ends for solvent welding ABS with lockable handle: H0 DLA 101: ⅜”, H0 DLA 102: ½”, H0 DLA 103: ¾”, H0 DLA 104: 1”, H0 DLA 105: 1 ¼”, H0 DLA 106: 1 ½”, H0 DLA 107: 2”. DualBlock VKDIV Manual Valve - 2-way Ball valve with Metric series female ends for solvent welding PVC-U: H0 DKE 305: 16mm, H0 DKE 306: 20mm, H0 DKE 307: 25mm, H0 DKE 308: 32mm, H0 DKE 309: 40mm, H0 DKE 310: 50mm, H0 DKE 311: 63mm, H0 DKE 312: 75mm, H0 DKE 313: 90mm, H0 DKE 314: 110mm. DualBlock VKDIA Manual Valve - 2-way Ball valve with Metric series female ends for solvent welding ABS: H0 DKA 305: 16mm, H0 DKA 306: 20mm, H0 DKA 307: 25mm, H0 DKA 308: 32mm, H0 DKA 309: 40mm, H0 DKA 310: 50mm, H0 DKA 311: 63mm, H0 DKA 312: 75mm, H0 DKA 313: 90mm, H0 DKA 314: 110mm. DualBlock VKDIV-SH Manual Valve - 2-way Ball valve with Metric series female ends for solvent welding PVC-U with lockable handle: H0 DLE 305: 16mm, H0 DLE 306: 20mm, H0 DLE 307: 25mm, H0 DLE 308: 32mm, H0 DLE 309: 40mm, H0 DLE 310: 50mm, H0 DLE 311: 63mm. DualBlock VKDIA-SH Manual Valve - 2-way Ball valve with Metric series female ends for solvent welding ABS with lockable handle: H0 DLA 305: 16mm, H0 DLA 306: 20mm, H0 DLA 307: 25mm, H0 DLA 308: 32mm, H0 DLA 309: 40mm, H0 DLA 310: 50mm, H0 DLA 311: 63mm. DualBlock VKDFV Manual Valve - 2-way Ball valve with BSP parallel female threaded ends PVC-U: H0 DKE B01: ⅜”, H0 DKE B02: ½”, H0 DKE B03: ¾”, H0 DKE B04: 1”, H0 DKE B05: 1 ¼”, H0 DKE B06: 1 ½”, H0 DKE B07: 2”, H0 DKE B08: 2 ½”, H0 DKE B09: 3”, H0 DKE B10: 4”. DualBlock VKDFV-SH Manual Valve - 2-way Ball valve with BSP parallel female threaded ends PVC-U with lockable handle: H0 DLE B01: ⅜”, H0 DLE B02: ½”, H0 DLE B03: ¾”, H0 DLE B04: 1”, H0 DLE B05: 1 ¼”, H0 DLE B06: 1 ½”, H0 DLE B07: 2”. DualBlock VKDOV Manual Valve - 2-way Ball valve with Flanged ends to BS EN 1092-1 ends PVC-U: H0 DKE F02: DN15, H0 DKE F03: DN20, H0 DKE F04: DN25, H0 DKE F05: DN32, H0 DKE F06: DN40, H0 DKE F07: DN50, H0 DKN F08: DN65, H0 DKN F09: DN80, H0 DKN F10: DN100.

DualBlock VKDOA Manual Valve - 2-way Ball valve with Flanged ends to BS EN 1092-1 ends ABS: H0 DKA F02: DN15, H0 DKA F03: DN20, H0 DKA F04: DN25, H0 DKA F05: DN32, H0 DKA F06: DN40, H0 DKA F07: DN50. DualBlock VKDOV- SH Manual Valve - 2-way Ball valve with Flanged ends to BS EN 1092-1 ends PVC-U with lockable handle: H0 DLE F02: DN15, H0 DLE F03: DN20, H0 DLE F04: DN25, H0 DLE F05: DN32, H0 DLE F06: DN40, H0 DLE F07: DN50. DualBlock VKDOA- SH Manual Valve - 2-way Ball valve with Flanged ends to BS EN 1092-1 ends ABS with lockable handle: H0 DLA F02: DN15, H0 DLA F03: DN20, H0 DLA F04: DN25, H0 DLA F05: DN32, H0 DLA F06: DN40, H0 DLA F07: DN50. DualBlock VKDOAV Manual Valve - 2-way Ball valve with Flanged ends to ANSI 150 PVC-U: H0 DKE X02: DN15, H0 DKE X03: DN20, H0 DKE X04: DN25, H0 DKE X05: DN32, H0 DKE X06: DN40, H0 DKE X07: DN50. DualBlock VKDOAV -SH Manual Valve - 2-way Ball valve with Flanged ends to ANSI 150 PVC-U with lockable handle: H0 DLE X02: DN15, H0 DLE X03: DN20, H0 DLE X04: DN25, H0 DLE X05: DN32, H0 DLE X06: DN40, H0 DLE X07: DN50. DualBlock VKRLV Metering Manual Valve - VKR Metering Ball Valve – BS series female ends for solvent welding PVC-U: H0 MBE 101: ⅜”, H0 MBE 102: ½”, H0 MBE 103: ¾”, H0 MBE 104: 1”, H0 MBE 105: 1 ¼”, H0 MBE 106: 1 ½”, H0 MBE 107: 2”. DualBlock VKRLA Metering Manual Valve - VKR Metering Ball Valve – BS series female ends for solvent welding ABS: H0 MBA 101: ⅜”, H0 MBA 102: ½”, H0 MBA 103: ¾”, H0 MBA 104: 1”, H0 MBA 105: 1 ¼”, H0 MBA 106: 1 ½”, H0 MBA 107: 2”. DualBlock VKRIV Metering Manual Valve - VKR Metering Ball Valve – Metric female ends for solvent welding PVC-U: H0 MBE 305: 16mm, H0 MBE 306: 20mm, H0 MBE 307: 25mm, H0 MBE 308: 32mm, H0 MBE 309: 40mm, H0 MBE 310: 50mm, H0 MBE 311: 63mm. DualBlock VKRIV Metering Manual Valve - VKR Metering Ball Valve – Metric female ends for solvent welding ABS: H0 MBA 305: 16mm, H0 MBA 306: 20mm, H0 MBA 307: 25mm, H0 MBA 308: 32mm, H0 MBA 309: 40mm, H0 MBA 310: 50mm, H0 MBA 311: 63mm. DualBlock VKRFV Metering Manual Valve - VKR Metering Ball Valve with BSP parallel female threaded ends PVC-U: H0 MBE B01: ⅜”, H0 MBE B02: ½”, H0 MBE B03: ¾”, H0 MBE B04: 1”, H0 MBE B05: 1 ¼”, H0 MBE B06: 1 ½”, H0 MBE B07: 2”. DualBlock VKROV Metering Manual Valve - VKR Metering Ball Valve with flanged ends, to BS EN1092-1 PVC-U: H0 MBE F02: DN15, H0 MBE F03: DN20, H0 MBE F04: DN25, H0 MBE F05: DN32, H0 MBE F06: DN40, H0 MBE F07: DN50. DualBlock VKROA Metering Manual Valve - VKR Metering Ball Valve with flanged ends, to BS EN1092-1 ABS: H0 MBA F02: DN15, H0 MBA F03: DN20, H0 MBA F04: DN25, H0 MBA F05: DN32, H0 MBA F06: DN40, H0 MBA F07: DN50. DualBlock VKROAV Metering Manual Valve - VKR Metering Ball Valve with flanged ends, to ANSI 150 PVC-U: H0 MBE X02: DN15, H0 MBE X03: DN20, H0 MBE X04: DN25, H0 MBE X05: DN32, H0 MBE X06: DN40, H0 MBE X07: DN50.

Approval Holder:

Aliaxis UK Ltd.

Company Name

Aliaxis UK Ltd.

Address

35 St Peter’s Road, Huntingdon

Postcode

PE29 7DA

Country

United Kingdom

Phone

01622852761

General Email

david.cousins@aliaxis.com

View All Listings by this Company

Inlet control group with a DZR brass body, consisting of a pressure reducing valve and pressure relief valve (6.0 Bar). The inlet incorporates a stainless-steel strainer, and the outlet incorporates an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The product is for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C. Outlet pressure range of the pressure reducing valve is 1.0 to 4.0 bar.

Section:

2345 Valves

Section Subtitle:

Special combination assemblies.

WRAS Approval Number:

241002712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression

Marking:

Intatec logo, CR , PN & DN on body. Intatec logo, 6.0 bar & BSEN 14941 on cap.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

UVGS22BC MODELS ADDED JULY 2025 UVGS22BC45 UVGS22BC08

Manufacturer:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

View All Listings by this Company