‘WS’ range of water meters with brass bodies, incorporating plastic impellers. The inlets incorporate plastic filters. Maximum working pressure 16 Bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

½” BSP (M) inlet/outlet (DN15). ¾” BSP (M) inlet/outlet (DN20). 1” BSP (M) inlet/outlet (DN25). 1¼” BSP (M) inlet/outlet (DN32) 1½” BSP (M) inlet/outlet (DN40) 2” BSP (M) inlet/outlet (DN50)

Marking:

Apator & logo, address, model, size and technical information on dial face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

WS range of Water Meters DN15, DN 20, DN 25, DN 32, DN 40 & DN 50

Approval Holder:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

General Email

przemyslaw.gretka@apator.com

View All Listings by this Company

Range of combination valves with bronze bodies, incorporating a spherical valve with a brass ball on the inlet, two pressure gauges either side of a pressure reducing valve and a water meter manifold. The pressure reducing valve has an outlet pressure range between 1.5 and 6.0 bar. The outlet incorporates two check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). The outlet of the Easy Flow Pro model also incorporates a spherical valve with a brass ball and a combined drain valve, above ground use only. Maximum inlet supply pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1510 Water Meter Manifolds

WRAS Approval Number:

250602703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R511 does not apply to the Easy Flow model.

Size:

1” BSP (F) inlet/outlet with 1” BSP (M) x ¾” BSP (F) reducing bushes.

Marking:

Albion logo, size, pressure, flow arrow and WRAS on body. Albion logo on handle. Easy flow pro on water meter cap.

Installation Requirements:

R001 R511

Expiry date:

30/06/2030

Model:

Easy Flow, Easy Flow Pro.

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Range of pilot operated base valves, main body only, with epoxy coated ductile iron bodies and stainless-steel plugs. Maximum working pressure IDROMEMBRANA 16.0 & HYDROMODUL 25.0 Bar Maximum operating temperature IDROMEMBRANA 50.0°C and HYDROMODUL 80.0°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300 Flanged

Marking:

Technidro, DN, PN and model name on adhesive label on body. Flow arrow on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

IDROMEMBRANA HYDROMODUL

Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250504706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

140 SX models: 3” GAS FLANGED outlet conenection, 180 SX models: 5” GAS FLANGED outlet conenection, 230 SX models: 6” GAS FLANGED outlet conenection, 270 SX models: DN200 FLANGED outlet conenection.

Marking:

Panelli logo, model type, serial no., made in Italy, production date (MM/YY) and other techical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2030

Proviso:

Open outlet use only.

Model:

140 SX 34/XX, 140 SX 44/XX, 140 SX 54/XX, 140 SX 64/XX, 180 SX 102/ XX, 180 SX 124/XX, 180 SX 140/XX, 180 SX 78/XX, 180 SX 90/XX, 230 SX 200/XX (DRXX), 230 SX 220/XX (DRXX), 230 SX 240/XX (DRXX), 230 SX 280/XX (DRXX), 270 SX 370/XX (DRXX), 270 SX 440/XX (DRXX) (A). Where: 140-180-230-270 = pump diameter. 140: 6”, 180: 8”, 230: 10”, 270: 12”. SX: Semi-axial pump family. 34-440: Flow. /XX = Number of stages (XX will be replaced by 1 or 2 digits as follows). 140 SX 34: 3 to 27, 140 SX 44: 3 to 22, 140 SX 54: 3 to 22, 140 SX 64: 1 to 18, 180 SX 102: 1 to 15, 180 SX 124: 1 to 13, 180 SX 140: 1 to 12, 180 SX 78: 1 to 19, 180 SX 90: 1 to 17, 230 SX 200: 1 to 9, 230 SX 220: 1 to 7, 230 SX 240: 1 to 7, 230 SX 280: 1 to 7, 270 SX 370: 1 to 5, 270 SX 440: 1 to 5. Optional: DRXX = Impeller diameter reduction in mm. XX can either be 10 or 20. A = Impeller with corner reduction.

Approval Holder:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

Manufacturer:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

Range of multistage pumps with stainless steel bodies and impellers. Maximum working pressure 10.0 bar. Cold Water Use Only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250508701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

OLIJU and product info on data plate.

Installation Requirements:

R001 R415

Expiry date:

31/05/2030

Model:

CHS 3 – 1” Female BSP, CHS 5 – 1” Female BSP, CHS 8 – 1 ¼” Female BSP, CHS 16 – 2” female BSP inlet X 1 ½ Female BSP outlet.

Approval Holder:

OLIJU - Júlio Nogueira Rodrigues

Company Name

OLIJU - Júlio Nogueira Rodrigues

Address

Rua da Mariana, 362 3885-466 Esmoriz Portugal

Country

Portugal

General Email

compras@oliju.com

View All Listings by this Company