PEX lined flexible hose assemblies with either nylon or stainless-steel braiding and a variety of end connectors. Some models are supplied with screwdriver operated isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2204701

Size:

See model

Marking:

HRN’, ‘WRAS’ and manufacturing date (YY/MM) on ferrule.

Installation Requirements:

R001 R008

Expiry date:

30/04/2027

Model:

Bore diameter: DN8, DN10 or DN13 End connections: ½” BSP F, 3/8” BSP F, ¾” BSP F, ½” BSP M, 3/8” BSP M & ¾” BSP M. M8, M10, M12 & M15. 10mm compression, 12mm compression, 15mm compression & 22mm compression. 15mm compression isolation valve & 22mm compression isolation valve. 3-WAY connector x 9mm Quick connector 9mm M-Quick plastic connector, 9mm M-quick Brass connector 135-A-B-C-D-E-F. The letters denote the following (for DN8): A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective. E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective F denotes DN size and is replaced by: 0 = DN8. The letters denote the following (for DN10) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN10 The letters denote the following (for DN13) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 03 = ¾” F, 17 = ½” M, 19 = 3/4” M, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 48 = M16, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN13

Approval Holder:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Manufacturer:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

OH Softpex® range of polyethylene lined outlet hoses with stainless steel and polyamide braiding (length 100 to 1000 mm), with various end connections. The hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2110340

Note:

Open outlet use only

Size:

DN6, DN8

Marking:

Neoperl, date (YYMMDD) on crimp

Installation Requirements:

R001 R008

Expiry date:

31/10/2026

Model:

OH Softpex® range; Part code: 39.90CD.EFG.HI Connection Sizes Quick connectors SQC Female M15 x 1 Male M8, M10, M12 Plugin D8 39.90CD.EFG.HI OH Softpex® Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type B = Hose Material CD.EFG = Manufacturing sequential number HI = Packaging information

Approval Holder:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Manufacturer:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

EPDM lined flexible hose assemblies with either nylon or stainless-steel braiding and a variety of end connectors. Some models are supplied with screwdriver operated isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2204700

Size:

See model

Marking:

HRN’, ‘WRAS’ and date of manufacture (YY/MM) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Bore diameter: DN8, DN10 or DN13 End connections: ½” BSP F, 3/8” BSP F, ¾” BSP F, ½” BSP M, 3/8” BSP M & ¾” BSP M. M8, M10, M12 & M15. 10mm compression, 12mm compression, 15mm compression & 22mm compression. 3-WAY connector x 9mm Quick connector 9mm M-Quick plastic connector, 9mm M-quick Brass connector 134-A-B-C-D-E-F. The letters denote the following (for DN8): A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective. E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective F denotes DN size and is replaced by: 0 = DN8. The letters denote the following (for DN10) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN10 The letters denote the following (for DN13) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 03 = ¾” F, 17 = ½” M, 19 = 3/4” M, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 48 = M16, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN13

Approval Holder:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Manufacturer:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Range of indirect and direct unvented storage cylinders consisting of either no coil (GLE) or a factory fitted single (GLC) or twin coil (GLT). The secondary circuit is supplied with a temperature and pressure relief valve set at 7.0 bar@85˚C for 1.0-6.0 bar products and 10.5 bar@95°C for 6.0-10.0 bar products. The products are supplied with an inlet control group (safety kit) consisting of a pressure reducing valve, an expansion relief valve 6.0 bar (1.0-6.0 bar products) or 10.5 bar (6.0-10.0 bar products) and an approved check valve, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is also supplied with an expansion vessel. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1890 Unvented Heating Apparatus

Size:

1 ½” BSP (M) secondary (inlet kit) 1 ½” BSF (F) secondary cylinder 1” BSP( F) primary coils

Marking:

Adveco badge on casing Serial No, Adveco, address, model no. capacity, & other tech info on adhesive label on body G3 warning label, maintenance label, service label, energy label on casing

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

Adveco GLE Range GLE 200, GLE 300, GLE 500, GLE 750, GLE1000 Adveco GLC Range GLC 200, GLC 300, GLC 500, GLC 750, GLC 1000. Adveco GLT Range GLT 200, GLT 300, GLT 500, GLT 750, GLT1000

Approval Holder:

Adveco Ltd

Company Name

Adveco Ltd

Address

Unit 7 & 8 Armstrong Mall Southwood Business Park Farnborough Hants

Postcode

GU14 0NR

Country

United Kingdom

Phone

01252 551 540

General Email

enquiries@adveco.co

View All Listings by this Company

Range of free standing direct gas fired unvented cyliners with a enamel coating internal lining and magnesium sacrificial anode. Fitted with a combined temperature and pressure relief valve set at 7 bar. Maximum working pressure 6.5 bar. Maximum operating temperature 80°C.

Section:

1890 Unvented Heating Apparatus

Size:

1” BSP(M) x 1”BSP(M)

Marking:

Elco, serial no, gas type, capacity and other techcnial on adhesive on label information on body.

Installation Requirements:

R001 R140

Expiry date:

30/04/2026

Model:

TUDOR NHREC 20 TUDOR NHREC 40 TUDOR NHREC 65 TUDOR NHREX 18 TUDOR NHREX 26 TUDOR NHREX 36 TUDOR NHREX 60 The AEALN / NHREX family of product has straight exhaust that goes from the burner through the tank up to the top of the water heater The COE family of product has a corkscrew exhaust that goes through the tank and exit at the base of the water heater Each water heater through specific setting can be used with 3 different type of gas: - G 20 = Methane - G 25 = Town Gas - G31 = Propane (LPG)

Approval Holder:

Elco Heating Solutions Limited

Company Name

Elco Heating Solutions Limited

Address

Juniper West, 3 Fenton Way Southshields Business Park Basildon

Postcode

SS15 6SJ

Country

Essex

Phone

01268 546 700

General Email

enquiries@elco.co.uk

View All Listings by this Company