Directory Search Results

Print List

#2212515

SIL4010, SIL5010 & SIL6010 white translucent. SIL4010, SIL5010, SIL6010 & SIL7010 blue. SIL4010, SIL5010, SIL6010 & SIL7010 red. SIL4010, SIL5010, SIL6010 & SIL7010 yellow. Compression moulded silicone rubber materials. Shore hardness between 40 & 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5415 Rubbers
Section Subtitle:
Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2212515
Expiry date:
31/12/2027

Approval Holder:
Xiamen Maihua Rubber Products Co. Ltd.
Company Name
Xiamen Maihua Rubber Products Co. Ltd.
Address
No.36, Dapu Road, Fengnan, Tong’an District, Xiamen 361100
Country
China
Phone
+86-592-7766536
General Email
info@xmmh.com

View All Listings by this Company

Print This Approval


#2210543

'Flomasta Pipe Thread Seal (SKU 4373J)'. Dark green coloured anaerobic sealant. For use with water up to 85°C. This product is to be applied and cured in strict accordance with the manufacturer's instructions.

Section:
5520 Sealants - Screwed Joints
Section Subtitle:
Anaerobic adhesives. These products are to be applied and cured in strict accordance with the manufacturer's instructions
WRAS Approval Number:
2210543
Expiry date:
31/10/2027

Approval Holder:
Lettergold Plastics Limited
Company Name
Lettergold Plastics Limited
Address
Unit 4 Hammond Close, Newmarket, Suffolk
Postcode
CB8 0AZ
Phone
+44 (0) 1638 666888
General Email
info@lettergold.co.uk

View All Listings by this Company

Print This Approval


#2211532

'RTP 0599 X 145641 BLACK'. Dark grey coloured, injection moulded, SAN material. For use with water up to 50°C.

Section:
5585 Thermoplastic Moulding Compound
Expiry date:
30/11/2027

Approval Holder:
RTP Company SNC
Company Name
RTP Company SNC
Address
3 Passage des Vreilles, Z.I. Beaune Vignolles, 21207 Beaune Cedex
Country
France

View All Listings by this Company

Print This Approval


#2210011

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. Models are either cold/premixed water only or hot and cold supply with a manually adjustable temperature lever. The product incorporates stainless steel strainers and the inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2210011
Size:
Stainless-steel braided PEX lined flexible hose assemblies with 3/8" BSP (F) captive nut end connections.
Marking:
Stern logo on end of tap body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2027
Model:
225901 Green AB1953 – Cold or premixed water 225951 Green B AB1953 – Cold or premixed water 225941 Green E AB1953 – Cold or premixed water 225801 Green 1000 AB1953 – Hot and cold water 225871 Green 1000B AB1953 – Hot and cold water 225821 Green 1000E AB1953 – Hot and cold water

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2210017

‘Tubular’ range of wall mounted spout outlets (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The box assembly incorporates a solenoid valve, screwdriver operated spherical valve and the spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2210017
Size:
½” BSP (M)
Marking:
Stern on front face of spout.
Installation Requirements:
R001 R040
Expiry date:
31/10/2027
Model:
Tubular 2030B (model code 350300). Tubular 2030E (model code 350400). Tubular 2030 LB (model code 350310). Tubular 2030 LE (model code 350410).

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2211011

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer and check valve cartridge(s), verified by test (suitable for backflow protection against Fluid Category 2). The product incorporates a stainless steel braided PEX lined flexible connection hose, connecting the spout to the solenoid. The spout outlet incorporates a plastic aerator. Maximum working pressure - 10 Bar Maximum operating temperature - 60 °C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2211011
Note:
R008 applies to the sensor control boxes. R007 only applies to models with connecting hoses (44521660 Meta, 44521670 IMO, 44521782 MEM, 44521809 Vaia).
Size:
Stainless steel braided PEX lined flexible hose assembly, incorporating a ½” BSP (F) captive nut end connections. Models added December 2023: Stainless steel braided, PEX lined flexible hose assembly with 3/8" BSP (F) captive nut end connectors.
Marking:
Dornbracht logo on body
Installation Requirements:
R001 R006 R007 R008 R009
Expiry date:
30/11/2027
Model:
44521660 Meta 44521670 IMO 44521782 MEM 44521809 Vaia Meta and Vaia – round spout / IMO and MEM - rectangular spout Models added December 2023: 44521831 YAMOU, 44521832 YARRE.

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2206324

Range of single hole, single outlet (swivel) electronically controlled tap assemblies. The flow and temperature is controlled by a ceramic cartridge headworks with single lever operating members. The flow is also controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The hose inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2206324
Size:
Stainless steel braided PEX lined flexible hoses with 3/8” BSP (F) captive nut end connections.
Marking:
Schell and company logo on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2027
Model:
002420699 002430699 002440699

Approval Holder:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company
Manufacturer:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company

Print This Approval


#2206063

Bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 bar. Cold water only

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2206063
Size:
½” BSP (M)
Marking:
Ideal Standard, Model, WRAS and BS1212-4 on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
30/06/2027
Model:
EEM90010002, EEM83230067 & EV98067

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2207048

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207048
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R280 R556 R571 R581 R001
Expiry date:
31/07/2027
Model:
TR9008. Model added March 2024 INST13008

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2207049

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207049
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R001 R280 R556 R571 R581
Expiry date:
31/07/2027
Model:
TR9002 Model added March 2024 INST13002

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 167 of 652

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.