Directory Search Results

Print List

#2103303

Range of concealed WC cistern in white plastic incorporating a BS 1212-4:2016 side entry float operated inlet valve providing a Type AG air gap arrangement and a single or dual flush outlet valve. The full flush can be set at 6 litres and the reduced flush can be set at 3 litres. The inlet supply incorporates a servicing valve. Maximum operating pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103303
Size:
½” BSP (M) inlet connection.
Marking:
Viega on flush operating panel. 6/3 volume on backplate within cistern.
Installation Requirements:
R001 R556
Expiry date:
31/03/2026
Model:
8504.38 WC cistern (without frame) 8533.38 with dry wall frame height 820mm
Product Images

Approval Holder:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company
Manufacturer:
Viega GmbH & Co. KG
Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 D-57439 Attendorn
Country
Germany

View All Listings by this Company

Print This Approval


#2104902

BS EN 997:2018 RAK Compact Rimless Wall Hung 700mm COMRIMWH W.C. pan (Ceramic), Thomas Dudley ‘A’ frame incorporating a Thomas Dudley Vantage Concealed cistern with a side entry compact type float operated inlet valve which discharges via a Type AG airgap and a dual flush pneumatic drop valve capable of full flush volumes of 4.5 litres and a reduced flush of 3 litres. The inlet connection hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2104902
Size:
15mm Push-fit Inlet connection.
Marking:
Inspection covers marked Thomas Dudley Ltd. Top of outlet drop valve marked ‘TD’, Corner of wall hung pan marked ‘RAK CERAMICS’
Installation Requirements:
R001 R559
Expiry date:
30/04/2026
Model:
RAK Compact Rimless Wall Hung 700mm COMRIMWH W.C. pan and Thomas Dudley Illusion A or Illusion Compact Universal Frame

Approval Holder:
Ruddy Joinery & Fit-Out Specialists
Company Name
Ruddy Joinery & Fit-Out Specialists
Postcode
MK45 5BS

View All Listings by this Company

Print This Approval


#2105320

Standpipe assembly break tank with a Type ‘AB’ air gap (verified by test – suitable for backflow protection against fluid category 5) mounted to the top of the standpipe body. The tank is filled via a compact float valve and has two screened weir slots. Water is then supplied by gravity from the break tank to the hose outlet below. Flow is activated via a spherical valve located behind a lockable panel. In addition to the isolation valve, the product incorporates a single check valve assembly (suitable for backflow protection against Fluid Category 2) prior to the spherical valve and an in-line ‘Y’ pattern strainer after it. The spherical valve includes a drain plug to allow for draining. Insulation is provided up to the drain point. Maximum working pressure 10.0 bar. Cold water use only.

Section:
0009 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 - Type AB - Air gap with weir overflow.
WRAS Approval Number:
2105320
Size:
20mm, 25mm or 32mm compression (for use with MDPE pipe manufactured to BS EN 12201-2:2011 only).
Marking:
Arrow valve, product code, manuafcturers website and tel no. on adhesive label on front cover.
Installation Requirements:
R001 R415 R430 R511
Expiry date:
31/05/2026
Model:
SPFC5X20, SPFC5X25, SPFC5X32.
Product Images

Approval Holder:
Arrow Valves Ltd
Company Name
Arrow Valves Ltd
Address
York House Northbridge Road Berkhamsted Hertfordshire
Postcode
HP4 1TA
Country
Herts
Phone
01442 823 123
General Email
enquiries@arrowvalves.co.uk

View All Listings by this Company
Manufacturer:
Arrow Valves Ltd
Company Name
Arrow Valves Ltd
Address
York House Northbridge Road Berkhamsted Hertfordshire
Postcode
HP4 1TA
Country
Herts
Phone
01442 823 123
General Email
enquiries@arrowvalves.co.uk

View All Listings by this Company

Print This Approval


#2005046

Range of double check valve assemblies consisting of two spring loaded in-line check valve cartridges housed in a DZR brass body with a drain port between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2005046
Size:
See model.
Marking:
CPS, size, CR and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/05/2025
Model:
631244 15mm compression inlet/outlet 375478 22mm compression inlet/outlet 662474 35mm compression inlet/outlet 799297 22mm compression inlet/outlet 218178 15mm compression inlet/outlet

Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Print This Approval


#2010390

Range of non-verifiable double check valve assemblies with DZR brass bodies, incorporating two spring loaded, resilient trim in-line check valve cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2010390
Marking:
TPK, Size, CR, flow arrow and date of manufacturer (MM-YY) on body.
Installation Requirements:
R001
Expiry date:
31/10/2025
Model:
571458 – 28mm compression 274337 – 42mm compression

Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Print This Approval


#2104046

Ceramic cartridge headwork with a plastic body, silicone gaskets and seals. For insertion into specifically dimensioned tap bodies. Maximum working pressure 10.0 bar. Maximum working temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
2104046
Size:
Ø 35mm
Marking:
Ningbo Mingbo Sanitary CO., Ltd logo and WRAS on side of body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
M35DA
Product Images

Approval Holder:
Ningbo Mingbo Sanitary Co., Ltd
Company Name
Ningbo Mingbo Sanitary Co., Ltd
Address
No. 71, Ruifeng Road Industrial Zone, Fenghua, Ningbo, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
Ningbo Mingbo Sanitary Co., Ltd
Company Name
Ningbo Mingbo Sanitary Co., Ltd
Address
No. 71, Ruifeng Road Industrial Zone, Fenghua, Ningbo, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2104006

Range of thermostatic cartridges incorporating brass bodies, stainless steel strainers and EPDM ‘O’-rings. For insertion into specifically dimensioned tap bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
2104006
Size:
¾” BSP (M)
Marking:
Jiangmen Shuiweishi Sanitary Ware Technology Co.,Ltd on cartridge body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
TX04. TX05. HF035. HF037. HF049. HF056.
Product Images

Approval Holder:
JIANGMEN SHUIWEISHI SANITARY WARE TECHNOLOGY CO.,LTD
Company Name
JIANGMEN SHUIWEISHI SANITARY WARE TECHNOLOGY CO.,LTD

View All Listings by this Company
Manufacturer:
JIANGMEN SHUIWEISHI SANITARY WARE TECHNOLOGY CO.,LTD
Company Name
JIANGMEN SHUIWEISHI SANITARY WARE TECHNOLOGY CO.,LTD

View All Listings by this Company

Print This Approval


#2104055

Range of deck mounted combination tap assemblies (chromium plated brass) incorporating rising spindle headwork with single lever operating members, swivel spout outlet and separate pull-down spray outlet (with self-closing trigger assembly). The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Models 98008-M001 & 98008-1 are single hole, single outlet. Model 98007-1 is two-hole, single outlet. Model 98001-2 is single hole, double outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2104055
Marking:
TOP-RINSE and WRAS on Body
Installation Requirements:
R001 R006 R090
Expiry date:
30/04/2026
Model:
½” BSP (M): models 98008-M001 & 98008-1. ½” BSP (F): model 98007-1. M10: model 98001-2.

Approval Holder:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company
Manufacturer:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company

Print This Approval


#2104056

Range of wall mounted combination tap assemblies (chromium plated brass) incorporating rising spindle headwork with single lever operating members, swivel spout outlet and separate pull-down spray outlet (with self-closing trigger assembly). The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Model 98011-1 is single hole, single outlet. Models 98002-1 & 98002-M001 are two-hole, single outlet. Model 98002MN-2 is two-hole, double outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2104056
Marking:
TOP-RINSE and WRAS on Body
Installation Requirements:
R001 R040 R090
Expiry date:
30/04/2026
Model:
½” BSP (M): 98011-1. ½” BSP (F): 98002MN-2, 98002-M001, 98002-1

Approval Holder:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company
Manufacturer:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company

Print This Approval


#2012095

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a pull-out spray with plastic aerator. The cold Inlet incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2012095
Size:
½” BSP (F) on cold inlet, stainless steel braided PE-X lined flexible hose assembly with ½” captive nut on hot inlet.
Marking:
Clearwater on body.
Installation Requirements:
R001 R006 R009 R010 R090
Expiry date:
31/12/2025
Model:
ROL10CP, ROL10BN, ROL10MB, ROL10BB, PIL40CP, PIL40BN, PIL40MB & PIL40BB COMBINATION TAP ASSEMBLIES
Product Images

Approval Holder:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 167 of 1122

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.