Range of DZR brass metering stations supplied with red and blue test points. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” - 2” BSP, BSPP or NPT (FxM).

Marking:

ALBION, CR, PN, Size “inches” & flow arrow.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

ART67 DNXX Where XX can be replaced with: DN15UUL, DN15UL， DN15L， DN15M， DN15, DN20, DN25, DN32, DN40, DN50.

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

KLDG-WR Range of electromagnetic flow meters with carbon steel bodies, NBR inner liner and stainless-steel electrodes. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 - DN300 flanged.

Marking:

Kleev USA Inc, product type, model number, DN, series number and other technical information on data plate on body. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

KLDG-WR

Approval Holder:

Kleev USA INC

Company Name

Kleev USA INC

Address

833 Claude Laurel Drive, APEX NC

Postcode

27523

Country

United States

Phone

00971 529 427777

General Email

infro@kleveusa.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. Maximum operating temperature 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250702730

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

U3 & U5 : 1” BSP (F) inlet x 1” BSP (F) outlet. U7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Felsom, Exa Pumps Srl, model and other technical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/07/2030

Proviso:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Model:

ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. (U) 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3/T (single or three phase): 50-150. U5/T (single or three phase): 70-200. U7 (single phase): 100-300. U7T (three phase): 100-350. U9/T (single or three phase): 100-250. U18 (three phase only): 180-400. Y = Number of impellers. U3, U5 (single or three phase): 2-7 stages. U7 (single phase): 2-6 stages. U7 (three phase): 2-7 stages. U9 (single or three phase): 2-5 stages. U18 (three phase only): 2-4 stages. Suffix T = 3 phase.

Product Images

Approval Holder:

Exa Pumps SrL

Company Name

Exa Pumps SrL

Address

Via Tre Confini, 23 22010 Gera Lario CO

Country

Italy

Phone

0039 0344 910054

General Email

infor@exapumps.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Felsom, Exa Pumps Srl, model and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Product Images

Approval Holder:

Exa Pumps SrL

Company Name

Exa Pumps SrL

Address

Via Tre Confini, 23 22010 Gera Lario CO

Country

Italy

Phone

0039 0344 910054

General Email

infor@exapumps.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Shower head(s) and/or shower handset(s).

Ceiling Mounted

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/11/2030

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Manufacturers:

Grohe AG