Range of copper press fittings with EPDM seals for use with EN1057 copper tube. The joints are achieved by means of a press tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112371

Size:

see models

Marking:

Valtech on body

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

CPM05 Press 90°Bend C×C (12,15,22,28,35,42,54mm) CPM07 Press 90° Bend FTG×C(12,15,22,28,35,42,54mm) CPM08 Press 45° Bend C×C (12,15,22,28,35,42,54mm) CPM09 Press 45° Bend FTG×C (12,15,22,28,35,42,54mm) CPM10 Press Tee C×C×C (12,15,22,28,35,42,54mm) CPM11 Press ReducingTee C×C×C (15×15×12, 22×22×15, 22×22×12, 22×15×15, 22×15×22, 28×28×22, 28×28×15, 28×15×22, 28×22×22, 28×15×28, 28×22×28, 35×35×28, 35×35×22,35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42, 54×54×35, 54×54×28, 54×54×22) CPM12 Press Cap (12,15,22,28,35,42,54mm) CPM01 Press Coupling C×C (12,15,22,28,35,42,54mm) CPM04 Press Fitting Reducer Ftg×C (15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35, 54×28, 54×22) CPM03 Press Reducing Coupling C×C (15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35)

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of brass compression fittings for use with copper pipe only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

2110394

Size:

6mm -54mm

Marking:

TX88 and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

140 Straight Coupling C x C 15mm,22mm,28mm,35mm,42mm,54mm 140 Reduced Coupling C x C: 22 x 15mm, 28 x 15mm, 28 x 22mm, 35 x 28mm 141 Straight Coupling C x F: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 142 Straight Coupling C x M: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 3/4”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 142 Straight Coupling C x MT: 15mm x 1/2”, 15mm x 3/4”, 22mm x 3/4”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 144 Elbow C x C: 15mm,22mm,28mm,35mm,42mm,54mm 144 Reduced Elbow C x C: 22 x 15mm 145 Elbow C x M: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 145 Elbow C x MT: 15mm x 1/2”, 22mm x 3/4”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 146 Elbow C x F: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 158X Backplate Elbow C x F: 15mm x 1/2”, 22mm x 1/2”, 22mm x 3/4” 150 Equal Tee C x C x C: 15mm,22mm,28mm,35mm,42mm,54mm 150R Reduced Tee C x C x C: 15 x 15 x 22mm, 22 x 15 x 15mm, 22 x 15 x 22mm, 22 x 22 x 15mm, 22 x 22 x 28mm, 28 x 15 x 28mm, 28 x 22 x 22mm, 28 x 28 x 15mm, 28 x 28 x 22mm, 35 x 35 x 15mm, 35 x 35 x 22mm, 35 x 35 x 28mm 154 Reduced Tee C x C x F: 15 x 15mm x 1/2”, 22 x 22mm x 1/2”, 22 x 22mm x 3/4” 154 Reduced Tee C x F x C: 15mm x 1/2” x 15mm, 22mm x 1/2” x 22mm, 22mm x 3/4” x 22mm 137 Stop End C: 15mm,22mm,28mm,35mm,42mm,54mm 1102/3/4 Reducing Set: 22 x 15mm, 28 x 15mm, 28 x 22mm, 35 x 22mm, 35 x 28mm, 42 x 28mm, 54 x 35mm, 54 x 22mm 1102/3/4 Reducing Set (1 part): 22 x 15mm, 28 x 15mm, 28 x 22mm 140D Straight Coupling C x C 15mm,22mm,28mm,35mm,42mm,54mm 140D Reduced Coupling C x C: 22 x 15mm, 28 x 22mm 141D Straight Coupling C x F: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”,28mm x 3/4”, 28mm x 1”, 28mm x 1-1/4”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 142D Straight Coupling C x M: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 3/4”, 28mm x 1”, 28mm x 1-1/4”, 35mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 142D Straight Coupling C x MT: 15mm x 1/2”, 15mm x 3/4”, 22mm x 3/4”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 144D Reduced Elbow C x C: 22 x 15mm 145D Elbow C x M: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 146D Elbow C x F: 15mm x 1/2”, 15mm x 3/4”, 22mm x 3/4”, 22mm x 1”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 158XD Backplate Elbow C x F: 15mm x 1/2”, 22mm x 3/4” 150D Equal Tee C x C x C: 15mm,22mm,28mm,35mm,42mm,54mm 150RD Reduced Tee C x C x C: 15 x 15 x 22mm, 22 x 15 x 15mm, 22 x 15 x 22mm, 22 x 22 x 15mm, 22 x 22 x 28mm, 28 x 15 x 28mm, 28 x 22 x 22mm, 28 x 28 x 15mm, 28 x 28 x 22mm, 35 x 35 x 15mm, 35 x 35 x 22mm, 35 x 35 x 28mm, 42 x 42 x 15mm, 42 x 42 x 22mm, 42 x 42 x 28mm ,54 x 54 x 15mm, 54 x 54 x 28mm 154D Reduced Tee C x C x F: 15 x 15mm x 1/2”, 22 x 22mm x 1/2”, 22 x 22mm x 3/4”, 28 x 28mm x 1/2”, 28 x 28mm x 3/4”, 28 x 28mm x 1” 137D Stop End C: 15mm,22mm,28mm,35mm,42mm,54mm 1102/3/4D Reducing Set: 22 x 15mm, 28 x 15mm, 28 x 22mm, 35 x 15mm, 35 x 22mm, 35 x 28mm, 42 x 15mm, 42 x 22mm, 42 x 28mm, 42 x 35mm, 54 x 15mm, 54 x 22mm, 54 x 28mm, 54 x 35mm, 54 x 42mm 1102/3/4D Reducing Set (1 part): 22 x 15mm, 28 x 15mm, 28 x 22mm 1103 Brass Olive: 15mm,22mm,28mm,35mm,42mm,54mm C1103 Copper Olive: 15mm,22mm,28mm,35mm,42mm,54mm

Approval Holder:

Purdon King (International) Ltd.

Company Name

Purdon King (International) Ltd.

Address

19/F, Tak Lee Commercial Building, 113-117 Wanchai Road, Wanchai

Country

Hong Kong

General Email

jonathan.lam@npking.com

View All Listings by this Company

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112370

Size:

see models

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

CSF28 90°Elbow Close Ruff C×C (8,10,12,15,22,28,35,42,54mm) CSF29 90°Street Elbow Close Ruff Ftg×C (8,10,12,15,22,28,35,42,54mm) CSF38 Reducing 90° Elbow C×C ( 22×15, 28×22, 28×15) CSF30 45°Elbow C×C(8,10,12,15,22,28,35,42,54mm) CSF39 45°Elbow FTG×C(8,10,12,15,22,28,35,42,54mm) CSF31 Equal Tee C×C×C(8,10,12,15,22,28,35,42,54mm) CSF32 Reducing TEE C×C×C (15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15) CSF23 Equal Coupling C×C (8,10,12,15,22,28,35,42,54mm) CSF25 Reducing Coupling C×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF26 Fitting Reducer Ftg×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF27 Tube Cap (8,10,12,15,22,28,35,42,54mm) CSF33 Cross Over Coupling C×C(15,22mm) CSF40 Partial Cross Over Ftg×C (15,22mm) CSF34 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF35 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF07 90°Elbow Close Ruff C×C (6,8,10,12,15,22,28,35,42,54mm) CSF08 90°Street Elbow Close Ruff Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF41 Reducing 90° Elbow C×C (12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28) CSF10 45°Elbow C×C(6,8,10,12,15,22,28,35,42,54mm) CSF11 45°Elbow FTG×C(6,8,10,12,15,22,28,35,42,54mm) CSF42 90°Elbow Long Turn C×C 6,8,10,12,15,22,28,35,42,54mm) CSF43 90°Street Elbow Long Turn Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF13 Equal Tee C×C×C(6,8,10,12,15,22,28,35,42,54mm) CSF45 Reducing TEE C×C×C (6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12,15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22,22×15×15, 22×15×12,28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15,35×35×28, 35×35×22, 35×35×15,35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35,42×42×28, 42×42×22, 2x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22,54×54×15,54×42×54, 54×35×54) CSF01 Equal Coupling C×C (6,8,10,12,15,22,28,35,42,54mm) CSF04 Reducing Coupling C×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF05 Fitting Reducer Ftg×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15,28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF16 Tube Cap (6,8,10,12,15,22,28,35,42,54mm) CSF46 Return Bend C×C(6,8,10,12,15,22,28,35,42,54mm) CSF14 Cross Over Coupling C×C(15,22mm) CSF15 Partial Cross Over Ftg×C (15,22mm) CSF21 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF19 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”)

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of overhead shower outlets (chrome plated plastic bodies). Inlets incorporate a strainer. Maximum operating temperature 85°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2105326

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2026

Model:

707553 200mm Fixed Head Chrome Square

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Shower handset with plastic bodies (chrome plated). Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2110138

Note:

Open outlet use only

Size:

Handsets: ½" BSP (M). Overhead Showers: ½" BSP (F).

Marking:

DEVA on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

HANDSET P

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of wall mounted thermostatic shower panels. Incorporates a single sequential headwork which controls the flow and temperature using a single lever operating member to a fixed riser rail shower hose and handset. The inlet incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with stainless steel strainers, flow restrictors and isolation valves. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2104925

Size:

15mm compression

Marking:

Twyford Logo (Brand of Geberit) on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2026

Model:

SF1211CP

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Range of wall mounted, concealed, thermostatic mixing vales with brass bodies and chrome plated trim sets, incorporating one or two quarter turn ceramic disc headworks with Single Lever operating members. Temperature is controlled independently via a thermostatic cartridge with various operating members (see model) which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2106055

Note:

This approval does not include a shower hose and handset or overhead shower outlet.

Size:

¾” BSP (F)

Marking:

DEVA on trim set.

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2026

Model:

NTN1D & NTN2D,

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of wall mounted, bar type, thermostatic shower blending valves (chromium plated brass), incorporating a ¼ turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

2110139

Note:

This approval does not include a shower hose and handset.

Size:

½" x ¾" BSP (M) offset union

Marking:

K VIT (Brand of Kartell) on body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/10/2026

Model:

SHO005PL

Approval Holder:

Kartell UK Ltd

Company Name

Kartell UK Ltd

Address

16-19 The Manton Centre, Manton Lane, Bedford

Postcode

MK41 7PX

View All Listings by this Company

Range of piston type float operated inlet valves with brass bodies. The valves discharge from a downwards atmospheric discharge arrangement on the underside of the body. Maximum working pressure: 3.0 (1FVA106 & 1FVA104 models only) or 14.0 Bar (all other models) Cold water use only.

Section:

2120 Valves

Section Subtitle:

Float operated, piston type.

WRAS Approval Number:

2109070

Note:

No float supplied.

Size:

Please refer to models.

Marking:

Albion, Model & Size on body

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

ART 1100W DN 15 1/2” BSP (M) – Inlet Shank: 2” or 3” ART 1100W DN 20 ¾” BSP (M) Inlet Shank 2” or 4” ART 1100W DN 25 1” BSP (M) ART 1100W DN 32 1 ¼” (M) ART 1100W DN 40 1 ½” BSP (M) ART 1100W DN 50 2” BSP (M)

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:

2450 Water softeners

Size:

¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet

Marking:

Calmag, model and other product info on adhesive label on rear of body.

Installation Requirements:

R001 R150 R170 R290 R415

Expiry date:

30/04/2026

Proviso:

Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.

Model:

CalSoft Mini, CalSoft Midi, CalSoft Maxi & CalSoft Compact

Approval Holder:

Calmag Yorkshire Limited

Company Name

Calmag Yorkshire Limited

Address

Riverview Buildings Bradford Road Riddlesden Keighley

Postcode

BD20 5JH

Country

United Kingdom

General Email

sales@calmagltd.com

View All Listings by this Company